Pacific WDV-18 Parts & Operating Manual

Other manuals for WDV-18: Operating Manual
Manual is about: WET/DRY VACUUM

Summary of WDV-18

  • Page 1

    Please read this book this operator’s book has important information for the use and safe operation of this machine. Read this book carefully before starting the machine. Keep this book and tell all operators to read the book. If you do not follow the instructions, you can cause an injury or damage ...

  • Page 2

    Important safety instructions read and understand all warnings and instructions before using this machine! Warning! To reduce the risk of fire, electric shock, or injury: 1. You must be trained to operate this machine. This machine is to be operated for its intended use only. 2. Do not operate this ...

  • Page 3: Operating Procedures

    Operating procedures warning! For the safe operation of this machine follow the instructions given in this booklet and the training given by your supervisor. Failure to do so can result in personal injury and/or damage to machine and prop- erty! Do not operate machine in an explosive environment! Wa...

  • Page 4: Maintenance

    4 maintenance good maintenance procedures assure better operation, fewer repairs and longer life to your machine. Disconnect the electrical plug of the machine from the electrical outlet before doing any cleanup, repairs or maintenance of the machine and when leaving the machine unattended. Clean th...

  • Page 5: Notes

    5 notes.

  • Page 6

    8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 38 39 40 41 32 42 43 44 45 58 31 wdv-18 wet/dry vacuum.

  • Page 7

    9 item part no. Description qty 1 602370 cap 1 2 911089 switch 1 3 602770 cover, motor 1 4 960030 screw, motor cover 4 5 515150 warning label 1 6 a13020 strain relief 1 7 908104 power cord, 14-3x50ft 1 8 w148d nut, cap 4 9 602771 filter, air vent 1 10 603473 gasket, motor 2 11 605213 motor, 115v 1 2...

  • Page 8

    8 wdv-18 wet/dry vacuum - front mount squeegee assembly.

  • Page 9

    9 1. Position the machine on a level surface. 2. Unlock the lower squeegee lift arm weldment (11). 3. Align the squeegee with the lift arm weldment; using the shoulder screws (5) on the back side of the lift arm weldment, place the jam nuts (4) between the arm weldment and squeegee and then screw th...

  • Page 10

    Warranty policy wet/dry vacuum, wdv-18 the pacific floorcare wdv-18 wet/dry vacuum has been manufactured, tested and inspected in accordance with specific engineering requirements and is warranted to be free from defects in workmanship and materials as follows: five (5) years parts, one (1) year lab...