Packard Bell Daytona Disassembly Manual - Removing The Hard Disk Drive
6
Fig. 5: Removing the DVD/CD-ROM drive screws
3. Slide the drive towards the front out of the bay.
Removing the Floppy Disk Drive
To remove the floppy disk drive, first remove the front bezel (see section Removing the
Front Bezel), remove the left side cover (see section Removing the Left Side Cover),
remove the right side cover (see section Removing the Right Side Cover); then follow the
steps below:
1. Disconnect all cables from the 3.5-inch floppy disk drive.
2. Remove the screws holding the floppy disk drive in the bay.
Fig. 6: Removing the floppy disk drive screws
3. Slide the floppy disk drive towards the front out of the bay.
Removing the Hard Disk Drive
To remove the hard disk drive, first remove the front bezel (see section Removing the Front
Bezel) and remove the left side cover (see section Removing the Left Side Cover); then
follow the steps below:
Packard Bell Daytona Disassembly Manual