Packard Bell EasyNote MZ Series Disassembly Manual - Hard Disk Drive
EasyNote MZ Disassembly Manual
6
Note:
In case there are 2 modules built in, you will have to remove the top module before
removing the bottom module.
Wireless LAN Adapter (Mini-PCI or Mini PCI-Express)
1. Remove the battery as described above.
2. Unlock the 2 screws of the add-on card cover. Note that the screws will
not come loose completely; they will stay attached to the cover.
See Fig. 2.
3. Lift the door out.
4. Disconnect the WLAN antennas from the card. Make a note for each
cable whether it is connected to ‘
main’
or ‘
aux’
.
5. For mini-PCI (EasyNote MZ35 / MZ36): Push aside the two clips
securing the WLAN adapter card.
Fig. 5 The WLAN module.
6. For mini-PCI Express (EasyNote MZ45): remove the two screws
securing the WLAN adapter.
7. Pull the card from its slot.
Hard Disk Drive
1. Remove the battery as described above.
2. Unlock the 2 screws of the HDD cover. Note that the screws will not
come loose completely; they will stay attached to the cover.
See Fig. 2.
3. Lift the door out.
4. Pull the hard disk loose from its connector.