Packard bell tcx170 user manual this manual has been made by systemtek with information from packard bell web site and from our own technical department. This is not the original manual that came with the product, but all the information you will need to setup and configure your packard bell tcx 170...
Tcx-170 digital tv receiver installation and setup in order to use your packard bell tcx-170 digital tv receiver, please follow the steps described below. Setting up your set-top box a. Connecting the antenna cable please pay attention that the antenna cables which you use have to be suitable for th...
• to prevent the build-up of heat in the receiver, leave enough space around it (at least 10 cm to each side). Place the receiver away from any source of heat, like heaters or direct sunlight. Never close the ventilation openings! • some connections mentioned in this guide require cables that are no...
Audio here you can set the default audio language to be used on power-up and service change. To set the audio language open the language menu and select the audio option with the up/down keys. Select the desired language with the left/right keys. Press the exit key to exit the menu. On screen displa...
Guard interval with the up/down keys an select the interval in the same way as the transmission mode. Please note: when you change the frequency manually, the uhf channel will change as well. The manual scan should only be performed by experienced users! If the background scan function in your recei...
To resort the list select a channel with the up/down keys and press the green key. With the up/down keys move the channel to its new position. Press the ok key to save the new position or the green key to cancel the changes. To rename a channel select the desired channel with the up/down keys and pr...
Please note: the keys to use will change their functions when switching lists! Name editor if you want to change the name of a service or a favourite list for example this name editor window will open. To delete the old name move to the delete field using the up/down and left/right keys. Press the o...
Entering details when the timer screen opens you will have to enter the details of the programming. Please use the up/down keys to navigate through the menu. Move to the cn option and enter the channel number with the number keys (three digits). Move to the date option and enter the date of the prog...
• if the pin has not been entered before the menu is timed out or if it is cancelled the event will not be added to the timer programming list and the display will return to the enter details menu. In case the censorship level has been set above no-block: if the pin has not been entered before the m...
This screen will show more information on the currently broadcasted program, as well as the next program on that same channel. You may scroll through information for other channels in the currently selected favourites list or the full service list (in case no favourites list is enabled). To do so, u...
In the lower part of the window the tv list is displayed with the channel name and number, starting time and title of the broadcast. Several icons might be visible which show for example if a broadcast has a reminder, is audio or has been newly added. To tune to a new channel please use the up/down ...
Updating the software of the tcx-170 digital tv receiver upgrading the software on the tcx-170 digital tv receiver is a largely automatic process. The updated software will be broadcasted over air, just like the other services. The receiver will indicate when an update is made available. Over air do...
