Packard Bell TCX 170 User Manual - page 2
TCX-170 Digital TV Receiver installation and setup
In order to use your Packard Bell TCX-170 Digital TV Receiver, please follow the steps described below.
Setting up your set-top box
A. Connecting the antenna cable
Please pay attention that the antenna cables which you use have to be suitable for the reception of
terrestrial programs. Connect the antenna cable with the antenna and the antenna input of your
digital receiver. Please ask your specialist what kind of antenna is best suitable for your area.
B. Connecting the TV set
Using the included scart cable, connect the TV socket of the receiver with the AV input on your TV
set.
C. Connecting the stereo
You may listen to the audio of your digital TV and radio programs via your stereo. Connect with a
cinch stereo cable the Audio L/R sockets of the receiver with the inputs of your stereo.
D. Connecting the VCR
It is possible to connect your receiver to a VCR. With a scart cable connect the VCR socket of the
receiver with the AV socket of the VCR.
E. Connecting the power supply unit
Plug the power cord into the power socket of the receiver and then connect the power cord with the
wall socket.
Notes: