PACOM PAC-171AV User Manual - Unpacking
Unpacking
Remove the package cover and place the product on a flat and
secure surface or in the installation location.
Check whether all the following devices and accessories are.
included with the main system.
Names and Functions of Parts
Front Key Control
1. SOURCE /
Select input source, and move the previous menu.-
2. MENU
Activates and exits the On Screen Display.
OSD MENU(MAIN) : Input, Picture, OSD, Setup.
3. AUTO / ▼(DOWN)
This button is move the OSD menu, and use to auto
adjustment of VGA input only.
4.
▲
(UP) / MUTE
Move the OSD main menu or sub menu.
and Mute the Sound
EX) If you select the mute, then the picture below appears
On the screen
5.
◀
(LEFT) / Volume
This button will decrease the level of active function, and
move to the previous menu. Adjust the volume (decrease).
6. ▶ (RIGHT) / Volume
This button will increase the level of active function, and
select OSD menu. Adjust the volume (increase).
EX) If you select the volume, then the picture below appears
On the screen.
( Use the Remote controller and Key controls)
1. DC 12V IN
DC power Input
2. VGA IN
VGA Signal Input.
3. VIDEO A IN
Composite signal Input for VIDEO A
4. VIDEO A OUT
Video looping output for VIDEO A
5. VIDEO B IN
Composite signal Input for VIDEO B
6. VIDEO B OUT
Video looping output for VIDEO B
7. S-VIDEO (Y/C) IN
Y/C separated signal input
8. S-VIDEO (Y/C) OUT
Y/C separated signal looping output
9. PC STEREO IN
Bottom Panel Control
User manual
E
- 6 -
7. IR Sensor
Remote controller sensor.
8. POWER ON/OFF
Turns the power ON or OFF. There will be a few
seconds delay before the display appears
The power LED(next to the power switch) lights
green when the power is turned ON.
The power is turned off by pressing the power switch