PACOM PAC-171AV User Manual - page 8
B. PICTURE MENU (Video mode)
Mode
URE MODE (VGA)
C. PICTURE MODE (VGA)
C. PICTURE MODE (VGA)
Custom
- NTSC input
User manual
Inputs can be set to Video A, Video B, S-Video, VGA mode.
1. Press the MENU button and then
▲/▼
button to select the Input menu.
2. Press the ENTER or
▶
button to select the Source List.
3. Press the ENTER or
▶
button and then
▼/▲
button to select
the input source.
4. Press the ENTER button to change the input source.
You can also select the input source with SOURCE on the
Remote Control
- PAL input
1. Press the MENU button and then
_▲/▼
button to select the
picture menu.
2. Press the ENTER or
▶
button to select the the Mode
3. Press the ENTER or
▶
button and then
▼/▲
button to
Select the picture Mode.
4. Press the ENTER button to save
You can also recall a desired picture mode with P.MODE on
the Remote Controller.
1. Press the ENTER or
▲/▼
button to select Custom in the Picture menu.
2. Press the
▼/▲
button and then ENTER or
▶
button to select
the adjustment item you need.
EX) If you select the Brightness, then the picture below appears
on the screen
3. Press the ◀/▶
button to increase or decrease level.
4. Press the
▲/▼
button to select the other item.
5. Press ENTER button to save.
You can also recall a desired Brightness, Contrast, Color or
Sharpness with BRIGHT, CONTRAST,
COLOR or SHARPNESS on the Remote Control.
NOTE : Tint item is NTSC input only.
Adjustment
E
- 8 -