Pacvac Superpro 700 Product & Training Manual - page 6
www.pacvac.com
Support: 08 9479 1444
8. Parts Profile -
8
9
PROBlEM: Back Pack not working
Cause:
Power cord not firmly plugged into power point
Solution:
Plug power cord into power point firmly.
Cause:
Power cord not firmly plugged into short lead.
Solution:
Plug power cord firmly into short lead.
Cause:
Back pack shuts off due to high motor temperature.
Solution:
Turn main switch off and unplug the back pack. Ensure the dust bag, Hypercone
Activeair filter and exhaust filter are clean. Inspect the wand, hose and floor tool and
remove any blockages. After 30 minutes the back pack should be ready for use. If not
contact the number below for your nearest Authorised Pacvac Service Agent.
PROBlEM: Back Pack has no/poor suction
Cause:
Dust bag full.
Solution:
Remove, empty and clean dust bag.
Cause:
Dust bag not installed correctly.
Solution:
Remove and empty dust bag making sure the rubber edging is correctly fitted around
the canister.
Cause:
Hose not installed correctly.
Solution:
Reconnect hose and ensure correctly sealed.
Cause:
Blockages.
Solution:
Remove hose, wand and floor tools; remove any blockages.
Cause:
Filters blocked.
Solution:
Clean Hypercone Activeair filter and external motor filter.
WaRnInG: TO REDuCE RISk Of PERSOnal InJuRy, unPluG BaCk PaCk BEfORE
aTTEMPTInG TO SOlVE PROBlEM OR WHEn SERVICInG
SERVICE REQuIREMEnTS
Servicing of the back pack is recommended the earlier of every 200 hours of use or at least once a year.
Should you require the details of your local Authorised Pacvac Service Agent or have any other queries
please contact us on 08 9479 1444 or sales@pacvac.com
For international distributors refer to the back cover of this Product Manual or visit our website at
www.pacvac.com
7. Troubleshooting
&
'
(
)
*
+
,
-
m*
&%
&&
&'
&(
&)
&*
&+
&,
&-
'&
''
'%
'(
.
&.
Hypercone
TM
Air Flow System
Motor Type: 2 Stage Flow Thru
220-240 volts
50 Hertz
1000 Watts + 200 Watts Outlet
4-5 Amps
Quote these part numbers when
ordering spare parts
no. Part name
Part no.
1. Top dome lid
KC251
2. Hypercone paper bag AF101
3. Dust bag
KC502HC
4. Hypercone hepa filter KC270
5. Main vacuum canister KC252
6. Motor gasket
KC253
7. 1000w Motor flow
thru (240v)
UP118
8. Motor gasket
KC253
9. Toggle latch
KC131
10. Intermediate noise
insulation
PV254
11. Intermediate housing KC256
12. Power outlet
KC257
13. Switch
VS261
14. Screw 5x20 (plastite) PV298
15. Noise insulation (motor) PV255
16. Screw 3x12 (plastite) PV299
17. Cable clamp
KC262
18. Mains cable lead (short) KC109SLM
19. Motor filter cage
KC264
20. External motor filter
PV259
21. Screw 6x25
22. Bottom cap
KC258
23. Extension lead
KC111/18
Mains cable lead:
AU, NZ, ZA
KC111/18
UK, SG, IN, AE
UP108JC/UK
US, JP
UP109USA