PageFlip Lite User Manual - Basic Operation
PageFlip Lite User Guide
4. BASIC OPERATION
4
BASIC OPERATION
Please read the operating instructions carefully before first use. The PageFlip Lite is designed
to handle a wide variety of books. It is important, though, that the user closely follow the
directions below in order to maximize performance, reliability, and reading pleasure.
4.1
Battery Installation for PageFlip Lite
1. Turn off the PageFlip Lite before inserting/removing the batteries.
2. Remove the two battery covers at the rear of the PageFlip Lite (Fig. 3(a)).
3. Install a total of four new AA alkaline batteries: two in each of the two battery wells.
4. Slide the battery covers back on.
Note: To conserve battery power, turn off the PageFlip Lite when it is not in use.
(a)
(b)
Figure 3: Battery covers at (a) rear of PageFlip Lite and (b) bottom of wireless pedal.
4.2
Battery Installation for Wireless Pedal
1. Turn off the wireless pedal before inserting/removing the batteries.
2. Open the battery cover on the bottom of the wireless pedal (Fig. 3(b)).
3. Install three new AA alkaline batteries.
4. Put the battery cover back on.
Note: To conserve battery power, turn off the pedal when it is not in use.
4.3
AC Adapter
In addition to being battery-operated, the PageFlip Lite page turner may also be plugged into
the wall via the AC adapter (included). Plug the adapter into the top outlet on the side of the
page turner (Fig. 4(c)).
PageFlip, Inc.
7
www.pageflip.com