Paitec IM- 4000 User Manual - Understanding
- 18 -
Understanding
IM-4500
Jetlink System
- Jetlink system is a communication system between the printer and the
IM-4000.
In the event of a jam in the
IM-4000 or when the IM-4000 is not properly
installed, the
IM-4000 sends a signal to the printer to stop printing process.
When the signal is received in a matter of seconds, the printer stops its current
activity and displays an error message on its display panel.
Checking the Connectivity
- When the
IM-4000 is properly connected to the printer, the display panel on the
IM-4000 will show an arrow on the bottom left corner.
Understanding the Functions of
IM-4000.
- Automatically stops the printing process in the event of a jam in the
IM-4000.
Ex)
In the event of a jam in the
IM-4000, the printer automatically stops
its current printing process in a matter of seconds. Once the jammed paper
is cleared, an operator can resume the process by simply pressing the
reset
button.
- Stops the printing process when the unit is not properly installed.
Ex)
When the interface guide or the folding unit is not properly installed, the
processing cannot be until the
IM-4000 is properly installed.
Once a jam or the
IM-4000 is properly installed, please press the “reset”
button and the printing process will resume automatically.