Wr-1 802.11ac wireless router with bakpak lite quick start guide bakpak enabled.
2 2 introduction the pakedge wr-1 wireless router with bakpak lite gives you the convenience of a high-throughput wired router integrated with an 802.11ac wave 2 wireless access point. The router has advanced features like port forwarding and static routes, while also supporting upnp for simple comp...
3 3 access point’s package contents • (1) wr-1 router • (1) power adapter • (1) quick start guide • (1) ethernet cable user guide • for more detailed instructions for this device and for bakpak lite, refer to the wr-1 user guide ( pkdge.Co/wr1-ug ). Specifications • system requirements: windows or m...
4 4 overview 4 3 2 1 wan usb 12v/1.5a reset 1 2 3 4 a b c h i j g f d e front panel back panel a power b internet c lan port activity d 2.4 ghz active e 5 ghz active f reset button g usb port h lan ports i wan (to modem/internet) port j power connector.
5 5 installing tools required: • computer with ethernet interface and a web browser • ethernet cable to install the unit: 1 open the box and remove the wr-1. 2 ensure that the unit is physically mounted away from obstructions that could interfere with the wireless signal, such as metal racks or othe...
6 6 logging in 1 after power is connected and a computer is connected to the lan port, enter the wr-1’s ip address into the address bar of your web browser. A login screen opens. Default settings: the ip address will be automatically set to 192.168.1.1. 2 type your user name and password, then click...
7 7 quick setup: wan zone options dhcp by default, the wireless router will connect to the internet using dhcp. If your isp uses dhcp, you may need to reset the modem to get internet access..
8 8 static ip if your isp uses static ip, enter the ipv4 address, ipv4 subnet mask, ipv4 gateway, and dns server provided by your isp. Select custom from the subnet mask drop-down menu to enter a custom subnet mask..
9 9 pppoe if your isp uses pppoe, enter the username that the isp assigned under the pap/ chap username field. Enter the password in the pap/chap password field. For the use custom dns servers field, enter the dns server you would like to use. For example, you can use 8.8.8.8..
10 10 registering your wr-1 with bakpak lite you can connect your wr-1 to your existing bakpak account or create a new account to manage all of your bakpak network management agents. To register your wr-1 to your bakpak account: 1 in the dashboard, click bakpak. The bakpak registration page opens. 2...
11 11 after you log in and bakpak lite has been registered, the dashboard opens..
Technical support for technical help: www.Pakedge.Com support@pakedge.Com (650) 385-8703 for non-technical inquires: customerservice@pakedge.Com (650) 385-8701 for regulatory information: www.Pakedge.Com/regulatory doc-00273-b 2017-09-01 ms 11734 election road, draper, ut 84020 main: (650) 385-8700 ...
