Palatinco Split Type Owner's Manual - page 8
6
HOW THE AIR CONDITIONER WORKS
ECONOMIC (SLEEP) operation
1
Set
Temperature
1
AUTOMATIC OPERATION
When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating(cooling/heating
models only), or fan only operation depending on what
temperature you have selected and the room temperature.
The air conditioner will control room temperature
1 hour
1 hour
automatically round the temperature point set by you.
Cooling
ECONOMIC (SLEEP) operation
Set
Temperature
1
If the AUTO mode is uncomfortable, you can select
desired conditions manually.
ECONOMIC(SLEEP) OPERATION
When you push ECONO (SLEEP) button on remote
controller during cooling, heating(cooling only type without),
1
1 hour
1 hour
Heating
increase (cooling) or decrease (heating) 1
per hour.
speed will be automatically controlled. This feature can
maintain the most comfortable temperature and save more
energy for you.
Room
temperature
Cooling
Fan only
Cooling
Fan only
Time
Cooling
DRYING OPERATION
The dry mode will automatically select the drying
operation based on the difference between the set
temperature and the actual room temperature.
The temperature is regulated while dehumidifying by
set temperature
DRYING operation
repeating turning on and off of the cooling operation or
fan only. The fan speed indicator will display AUTO and
low speed will be used.
OPTIMAL OPERATION
To achieve optimal performance, please note the following:
Adjust the air flow direction correctly so that it is not directed on people.
Adjust the temperature to achieve the highest comfort level. Do not adjust the unit
to excessive temperature levels.
Close doors and windows on COOL or HEAT modes, or performance may be reduced.
Use TIMER ON button on the remote controller to select a time you want to start
your air conditioner.
Do not put any object near air inlet or air outlet, as the efficiency of the air conditioner
may be reduced and the air conditioner may stop running.
Clean the air filter periodically, otherwise cooling or heating performance may be reduced.
Do not operate unit with horizontal louvre in closed position.