Palm Treo 800w Get Started
>
Insert the Battery
1.
Gently press the battery door and slide it down to remove it.
2.
Align the battery contacts with the contacts in the compartment, and then gently press
the battery down until it clicks into place.
3.
Replace the battery door.
>
Charge the Battery
1.
Plug the AC charger into an outlet.
2.
Plug the other end of the charger into the microUSB connector on the bottom of your
Palm® Treo™ 800w smart device.
1
Prepare Your Device
2
Activate Your Device and Make Your First Call
3
Set Up Your Voicemail
4
Connect to Your Computer
5
Need Help?
>
Set Up Your Voicemail
1.
Go to your
Today
screen.
2.
Press and hold
(approximately five seconds) to dial Sprint’s voicemail system.
3.
Follow the system prompts to set up your voicemail.
>
What’s My Phone Number?
From your
Today
screen, press
Menu
(right softkey), and then select
Preferences > Phone Settings
to display your phone number.
>
Set Up Your Device
When the Windows Mobile
®
screen appears, follow any instructions that
appear on the screen.
Note:
If no instructions appear, skip ahead to “Make a Call.”
>
Activate Your Treo
If you bought your Treo at a Sprint Store, your device should be activated and ready
to use.
If you received your Treo in the mail and it is a new Sprint account or a new line of
service, you need to take these steps to activate it:
1.
Turn on the phone feature. (Press
Power/End
and if prompted, press
Center
to turn off
Keyguard
. Next, press and hold
Power/End
.)
2.
Press
Start
> Internet Explorer
. (There is no charge for this service
during activation.)
3.
Follow the onscreen prompts to update your profile and activate your Treo. A
message is displayed when the process is completed.
4.
Wait for the phone feature to turn off and then back on. If this does not occur, press
and hold
Power/End
to turn it off and then press and hold
Power/End
to
turn it back on.
5.
To confirm your activation, make a phone call.
If you received your Treo in the mail and are activating a new phone for an existing
number on your account, contact Sprint Customer Service to activate your new device.
There are two activation options:
• From your computer’s Web browser, go to
www.sprint.com/activate
and complete
the onscreen instructions to activate your Treo.
- or -
• Call
1-888-211-4727
from another phone for assistance with activation.
When you have finished, make a phone call to confirm your activation.
>
Make a Call
1.
Go to your
Today
screen. (If the screen is off, press
Power/End
and then press
Center
to disable
Keyguard
. If you are in another application, press
Power/End
.)
2.
Press the number keys to enter the phone number you want to call.
3.
Press
Phone/Talk
to make the call.
4.
When you’re finished, press
Power/End
to end the call.
Look here for your
phone number
Today Screen
>
Install the Software
Windows XP:
You must install the software that came with your Treo, even if you
already have synchronization software installed on your computer.
Windows Vista:
You may not need to install software from the CD. However,
we recommend that you follow the CD installation steps to ensure that the
synchronization software is loaded on your computer and to install the
User Guide
.
• Insert the Getting Started CD into your computer’s CD drive and follow the onscreen
instructions for installing the software.
>
Need Help With Setup?
Call 1-866-750-PALM (7256)
after your Treo has been activated.
This service is complimentary within 90 days of purchase.
Our support staff can help you set up your Treo and get you up and running. Please
note that we can better assist you if your device is fully charged and activated and
you are calling from a phone other than your Treo.
Hours:
Monday to Friday, 5 am to 9 pm Pacific
Saturday and Sunday, 8 am to 5 pm Pacific
We may refer you to Sprint for help with carrier-specific features, such as service plan
information or billing issues. Offer subject to change without notice.
>
On Your Computer
Access the
User Guide
at
Start > Programs > Palm Support Center > User Guide
.
>
On Your Treo
Access Help at
Start
> Help,
or Quick Tour at
Start
> Programs >
Quick Tour
.
>
In the Box
Basics Guide:
Printed introduction to the basics.
>
On the Web
palm.com/treo800wsprint-support
or
www.sprint.com
6
Manage Your Account
Intellectual Property Notices
© 2008 Sprint Nextel. All rights reserved. No reproduction in whole or in part without
prior written approval. SPRINT and other trademarks are trademarks of Sprint Nextel.
© 2008 Palm, Inc. All rights reserved. Trademark, copyright, patent, and other
intellectual property notices are set forth on page ii within the
Basics Guide
.
Disclaimer and Limitation of Liability
Palm, Inc. and its suppliers assume no responsibility for any damage or loss resulting
from the use of this guide. Palm, Inc. and its suppliers assume no responsibility for
any loss or claims by third parties that may arise through the use of this software.
Palm, Inc. and its suppliers assume no responsibility for any damage or loss caused
by deletion of data asa result of malfunction, dead battery, or repairs. Be sure to make
backup copies of all important data on other media to protect against data loss.
Agency Compliance Information
Product regulatory and compliance information can be found in the
User Guide
at
palm.com/treo800wsprint-support.
406-11118-00
Get started.
All you need to know to get going.
USB Sync Cable
>
Online: www.sprint.com
•
Make a payment, see your bills, enroll in online billing.
•
Check minute usage and account balance.
•
See or modify the details of your Sprint service plan.
•
Get detailed instructions and download content.
>
From Your Sprint Phone
•
Press
to check minute usage and account balance.
•
Press
to make a payment.
•
Press
to access a summary of your Sprint service plan or
get answers to other questions.
>
From Any Other Phone
•
Sprint Customer Service: Dial 1-888-211-4727
•
Business Customer Service: Dial 1-800-927-2199
Phone/Talk
Center Button
Numbers
Power/End
Keyboard
>
Synchronize
1.
Connect your Treo and your computer.
2.
Follow the onscreen instructions for setting up synchronization.
3.
To check for synchronization progress:
•
Windows XP:
Look for the
ActiveSync
icon at the top of the screen on your Treo
and the
ActiveSync
icon in the taskbar on your computer.
•
Windows Vista:
Look for the animated
connection
icon at the top of the screen
on your Treo.
4.
When synchronization is complete, press
Start
on your Treo to start using the applications.
*31PSU
5PVDITDSFFO
XJUICVJMUJO
TDSFFOQSPUFDUPS
4JEF#VUUPO
7PMVNF#VUUPO
*OEJDBUPS-JHIU
QIPOFBOEDIBSHF
JOEJDBUPS
4UZMVT
&BSQJFDF
1IPOF5BML
$BMFOEBS
4UBSU
-FGU4PGULFZ
3JHIU4PGULFZ
XBZ/BWJHBUPS
.JDSP64#$POOFDUPS
$FOUFS
1PXFS&OE
*OCPY
.JDSPQIPOF
0,
3JOHFS4XJUDI
8*'*#VUUPO