Palm Tungsten W Read This First
c. To confirm the connection:*
(1) Check that the indicator light is
blinking green.
(2) Press Home . Tap the
Mobile icon . Your wireless
service provider’s name appears
in the Mobile application
onscreen keypad.
Here’s what you’ll do:
•
Connect to your provider’s wireless
network.
•
Install expansion card applications
and Palm
™
Desktop software.
Important! Already use a
Palm
™
handheld?
•
Synchronize your old handheld with
your computer so that the information
is up-to-date.
•
Go to www.palm.com, navigate to
country-specific pages if necessary, and
access support information for Tungsten
W. Click the upgrade link to learn how to
transfer information to your new
handheld.
START HERE
Contents
a. Plug the adapter into an outlet and the cradle.
b. Place your Tungsten
W handheld into the cradle.
c. Check that the charging indicator light is on. This means your
handheld is properly seated in the cradle and is being charged.*
d. Charge for a full two hours.
Connect and charge
Set up your handheld
1
2
Insert the SIM card
a. Turn off your handheld.
b. Open the access door and
remove
the sample SIM card
.
3
5
Center
INSTALL SOFTWARE AND SET UP E-MAIL
CONNECT TO YOUR PROVIDER’S WIRELESS NETWORK
Have you established wireless service and received a SIM card? If not, consult a Palm
™
Tungsten
™
W supported wireless service provider. To activate, select a rate plan, and
provide personal and credit information. You will receive a SIM card to use with your
new handheld.
6
Install wireless applications and
network configuration settings
from the expansion card
* Windows NT and systems without USB ports
require the Palm HotSync Cradle-Serial,
SKU 10828U, sold separately.
† Problems? If installation or the HotSync process
did not work, see Troubleshooting on the other
side of this document.
Install Palm
™
Desktop software on
your computer
7
Set up your e-mail account
8
* Problems? See Troubleshooting on the other side
of this document.
Make a phone call
Palm
™
Tungsten
™
W
wireless integrated
handheld and phone
USB HotSync
®
cradle
Expansion card
(optional)
Hands-free
headset
Charging
indicator light
When properly
seated, there is a
small gap between
the front of the
handheld and
the cradle
4
Turn on the Mobile application and
connect to the network
Palm
Desktop
software CD-ROM
Software Essentials
CD-ROM
a. Remove the handheld from the cradle.
e. Tap firmly the center of at least
3 targets.
Note!
Your handheld turns off automatically
after one minute of inactivity. Press the
power button to turn it on again.
b. Press the power button.*
c. Remove the stylus.
d. Follow Setup instructions on
the screen.
* Problems? See Troubleshooting on the other
side of this document.
1. Tilt it forward.
2. Lift it up.
* Problems? See Troubleshooting on the other side
of this document.
Wireless button
a. Press and
hold
the Wireless button
until the Mobile dialog box appears.
Be sure to hold the button down for
two seconds.
b. Tap On in the Mobile dialog box.*
a. Remove the placeholder card: Push lightly against the card to release it.
b. Insert the expansion card as shown by the icon: Push the card in. You feel the
card lock and hear the system sound.
c. Follow the onscreen instructions to install the software.
d. When your handheld restarts and the Date/Time screen appears, turn off the
handheld. Remove the expansion card (see step a) and replace the placeholder
card. Go on to step 7.
e. After installation, keep the expansion card in a safe place in case you need to
use it again.
Windows:
c. Follow the installation instructions
that appear on your computer
screen.
†
USB
Your subscriber identity module (SIM) card contains your basic subscriber
information. Your wireless provider also uses the SIM card to register and track
your handheld on the wireless GSM/GPRS network. The wireless applications
of your handheld cannot operate on the network without the SIM card.
Gold
contact
area
c. Detach the SIM card from its plastic
holder (if provided in a holder).
d. Slide the SIM card onto the access
door. Close the door.
Icon
Notched
corner
Power
adapter
Stylus
Power
button
***Print as 5 color job (CMYK + PANTONE 877 metallic)
***Please convert all spot colors to Process EXCEPT PANTONE 877
Use Palm
™
Desktop software to enter appointments, addresses, and other
information. Then transfer the information to your handheld by performing a
HotSync
®
operation. It’s the fastest way to enter lots of information.
Note!
You must install the version of
Palm Desktop software included
in this package.
a. Connect the USB HotSync
cradle to the computer.*
b. Put the CD-ROM in the
CD-ROM drive.
a. With the handheld on, insert the headset into the voice jack. This opens the
Mobile application and the onscreen keypad used for dialing. If you are in
another application, press the headset button.
b. Place the earpiece in your ear.
c. Tap the number you want to dial.
d. Tap Dial.
Additional Tips
•
To answer an incoming call, press the headset button.
•
To hang up, press and hold the headset button.
•
You can also press the headset button to move between screens in the
Mobile application.
Headset button: Short press
to answer call, long press
to hang up
Earpiece
Voice jack
Blinking green
indicator light
Upgrading? First perform a HotSync operation to transfer prior account settings
and saved e-mail messages.
a. Press the E-mail button to open the VersaMail application.
b. Press Command Stroke + W, or press Function + Menu , and then
select Account Setup from the Accounts menu.
c. Select New from the Account Setup screen.
d. Enter a description, such as “My Yahoo!”.
e. Tap Mail Service and select your provider. If your provider is listed, most
settings are automatically completed for you; proceed to step g. Select Other
if your provider is not listed.
f. Tap Protocol and select the appropriate protocol.
g. Tap Next, and then enter your username, which appears before the @ symbol
in your e-mail address.
h. Tap Password and enter a password.
i. Tap Next.
j. Tap Done.
Do you know your Mobile number?
Refer to the documentation you
received from your wireless
service provider.
Mac:
Important for Mac upgraders!
During Install, create a new username
for your new handheld. Do not use your
current username.
c. Double-click the Palm Desktop
Installer icon to install Palm Desktop
software.
†
The installer installs some additional
files to the Add On folder of your
Macintosh. Use the Install Tool in
Palm Desktop software to install
these files. For complete information
on installing files, see Handbook for
Palm
™
Tungsten
™
W Handhelds.
Over