Pa168v h323 fxs gateway telnet setup guide (v1.60) pa168v h323 fxs gateway telnet setup guide ¾ telnet configuration ........................................................................................................ 2 ¾ pa168v telnet commands explanation ..........................................
Pa168v h323 fxs gateway telnet setup guide (v1.60) 2 when pa168v h323 fxs gateway is properly installed, you can set each parameter through pc and telnet commands. Details please refter to 《pa168v h323 fxs gateway spec and install》 ¾ telnet configuration ● on the pc choose start>run, type telnet 192...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 3 ? Supply command name and parameters get display basic parameters of the pa168v fxs gateway set set parameters of the pa168v fxs gateway store save current settings to designated position load load designated settings to current position default r...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 4 ¾ command get syntax description: no optional parameter of keywords usage: display basic parameters of the pa168v fxs gateway relevant usage: none detailed description: get display basic running parameters of the pa168v fxs gateway. Input ordinary...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 5 nataddr [www.Showmyip.Com] natttl 0 phonenumber 82378801 account [empty] pin [empty] rasport 1732 q931port 1732 h245port 1734 rtpport 1734 tos 0 localtype 0[phonenumber] dtmf 0[inband audio] ***************other settings*************** superpasswo...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 6 timezone 55[(gmt+08:00)beijing,hong kong,urumqi] ¾ command set syntax description: set keywords value usage: it is to configure password and other running parameters of pa168v fxs gateway. Detailed description: set iptype x set how pa168v fxs gate...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 7 of dial-up network. Set ip xxx.Xxx.Xxx.Xxx with iptype set as 0, use this command to set ip address of pa168v fxs gateway. Set subnetmask xxx.Xxx.Xxx.Xxx with iptype set as 0, use this command to set subnet mask of pa168v fxs gateway. Set router x...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 8 from 0 through 6: 0: g729; 1:g7231; 2: g711u; 3: g711a; 4: gsm; 5: ilbc; 6: null. Set codec2 x set the priority 2 of the audio compression algorithm. X ranges from 0 through 6: 0: g729; 1:g7231; 2: g711u; 3: g711a; 4: gsm; 5: ilbc; 6: null. Set co...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 9 set vad x enable/disable vad. X ranges from 0 through 1: 0: disable vad; 1: enable vad. Set agc x enable/disable agc. X ranges from 0 through 1: 0: disable agc; 1: enable agc. Set aec x enable/disable aec. X ranges from 0 through 1: 0: disable aec...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 10 set initial volume of handset. X ranges from 0 through 15. Set handsetout x set initial volume of handout. X ranges from 0 through 31. Set dualmode x set to enable or disable the pstn line . X ranges from 0 through 2. 0: do not use pstn line; 1: ...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 11 example, the area code of beijing is 10; the area code of shanghai is 21, and the area code of chengdu is 28, etc. Parameter xxx must be an arabic numeral and no longer than 3 characters. Set iddcode xxx set the country code when set dialplan val...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 12 with innerline set as 1[enable], please set the prefix to pick up inner line, such as 0. Set callwait x set whether to use call wait. X ranges from 0 to 1: 0: do not use call wait; 1: use call wait. Set fwdnumber xxxxxxx set receiving forwarded c...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 13 set the ring seconds before the phone answers the call automatically or forward the calls. X is ranges from 0 through 60. Set digitmap x set whether to use digitmap. X ranges from 0 to 1: 0: do not use digitmap; 1: use digitmap. Set service x set...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 14 7: use dda service; 8: use vida service; 9: use smartcon’s service; 10: use avtech’s system; 11: use ringtec’s system; 12: use citron’s system; 13: use asiasoft’s system; 14: use txtc’s system; 15: use i-fon’s system; 16: use suntek’s system; 17:...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 15 use this value with innopath private system used; 4: use this value with vida private system used; 5: aivgr , use this value with aivgr private system used; 6: use this value with eproxy private system used. Set nataddr xxxxx set ip address of na...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 16 while calling card is set, set password of the chosen card; while local type is set to use authentication type, set password. Set rasport xxxx set register port.Xxxx ranges from 1024 through 65535. Set q.931port xxxx set signal port. Xxxx ranges ...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 17 authentication account and pin. Set dtmf x set dtmf relay type. X ranges form 0 through 2: 0: inband audio； 1: h245 string；2: q931 keypad. Set superpassword xxxx set super password of the pa168v fxs gateway . Xxx must be ascii characters. Set deb...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 18 set upgradeaddr http://xxx.Xxx.Xxx.Xxx:port ftp://xxx.Xxx.Xxx.Xxx: port tftp://xxx.Xxx.Xxx.Xxx: port set ip address or domain name of upgrade server supplying upgraded program and configurations of pa168x ip phone. Set sntpip xxx.Xxx.Xxx.Xxx set ...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 19 ¾ command default syntax description: no keyword and parameter usage: restore to manufactory defaults parameters. Relevant usage: none ¾ command exit syntax description: no keyword and parameter usage: exit from telnet command window without savi...
Pa168v h323 fxs gateway telnet setup guide (v1.60) 20 reserves the right to make changes in technical and product specification without prior notice. Pa168v h323 fxs gateway telnet setup guide (v1.60) copyright© 2003---2007 all rights reserved.
