Pa168v mgcp fxs gateway telnet setup guide (v1.49) pa168v mgcp fxs gateway telnet setup guide ¾ telnet configuration ........................................................................................................ 2 ¾ pa168v telnet commands explanation ..........................................
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 2 when pa168v mgcp fxs gateway is properly installed, you can set each parameter through pc and telnet commands. Details please refer to《pa168v mgcp fxs gateway spec and install》 ¾ telnet configuration ● on the pc choose start>run, type telnet 192.1...
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 3 ? Supply command name and parameters get display basic parameters of the pa168v fxs gateway set set parameters of the pa168v fxs gateway store save current settings to designated position load load designated settings to current position default r...
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 4 ¾ command get syntax description: no optional parameter of keywords usage: display basic parameters of the pa168v fxs gateway relevant usage: none detailed description: get display basic running parameters of the pa168v fxs gateway. Input ordinary...
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 5 upgradeaddr [empty] sntpip 0.0.0.0 daylight 0[disable] timezone 55[(gmt+08:00)beijing,hong kong,urumqi] input ordinary password with debug set as 0[disable], and the following information will be seen: pa168x v1.49 settings password:**** p:\>get *...
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 6 set iptype x set how pa168v fxs gateway gets relevant network parameters. X ranges from 0 through 3. 0: authorize users to set ip address, subnet mask and router ip address of pa168v manually; 1: use dhcp mode. With this system, 2: use pppoe mode....
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 7 set router xxx.Xxx.Xxx.Xxx with iptype set as 0, use this command to set router ip of network. Set dns xxx.Xxx.Xxx.Xxx with iptype set as 0, use this command to set ip address of dns server. Set dns2 xxx.Xxx.Xxx.Xxx with iptype set as 0, use this ...
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 8 set the priority 3 of the audio compression algorithm. X ranges from 0 through 6: 0: g729; 1:g7231; 2: g711u; 3: g711a; 4: gsm; 5: ilbc; 6: null. Set codec4 x set the priority 4 of the audio compression algorithm. X ranges from 0 through 6: 0: g72...
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 9 enable/disable aec. X ranges from 0 through 1: 0: disable aec; 1: disable aec. Set audioframes x set audio frames in rtp package. X is arabic numerals between 0 and 7. Set 6.3 k x with g.7231 codec selected; set pa168v fxs gateway to use 6.3k rate...
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 10 set dual modes prefix xx when ip first is set in the dual modes setting, setting switches to pstn prefix； xx ranges from 0 through 99. Set service type x enable/disable the prepaid and service system .Choose the repaid server provider. Parameter ...
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 11 the log in server and ip phone in the same lan, or the log in system supports the ip phone working behind the lan; 1: use nat traversal. When the login system does not support ip phone working behind the lan, with this item selected, please make ...
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 12 set domain xxxxxxxxxx set the domain name; value xxxxxx must be an arabic numeral and no longer than 32 characters. Set registerport xxxx set register port.Xxxx is range from 1024 through 65535. Default value is 2427. Set rtpport xxxx rtp port is...
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 13 set superpassword xxxx set super password of the pa168v fxs gateway . Xxx must be ascii characters. Set debug x set open debugging message output grade for special tool. X ranges from 0 through 5: 0: close debugging output; 1: output the operatio...
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 14 set ip address of time server. Set daylight x set to use daylight or not. X ranges from 0 through 1: 0: do not use daylight; 1: use daylight. Set timezone xx set time zone. ¾ command store syntax description: no keyword. Parameter ranges from 0 t...
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 15 ¾ command exit syntax description: no keyword and parameter usage: exit from telnet command window without saving the configuration. Relevant usage: none ¾ command write syntax description: no keyword and parameter usage: save the configuration a...
Pa168v mgcp fxs gateway telnet setup guide (v1.49) 16 reserves the right to make changes in technical and product specification without prior notice. Pa168v mgcp fxs gateway telnet setup guide (v1.49) copyright© 2003---2005 all rights reserved.
