Palsonic PAL177FZ User Manual - Installation Requirements
8
1. Screw cover 2. Screw 3.Top cover 4. Leg regulator 5. Upper hinge 6.Hole cover 7.Door 8. Lower hinge
1. Remove the screw cover(1), remove the screws(2) and the top cover(3)and the screws of the upper hinge(5)and then
remove the upper hinge.
2. Remove the hole cover (6) and then transfer it to the opposite side of the door (7).Then remove the door remember to
keep the padded surface of the door upwards to prevent the scratching.
3. Remove the lower hinge (8)and the leg regulator of the lower hinge then transfer the leg regulator on the opposite side of
the lower hinge.
4. Fix the lower hinge on the cabinet and then transfer the leg regulator (4) on the opposite side.
5. Put the door (7) on the lower hinge (8), keep the door level, then fix the upper-hinge (5) on the cabinet.
6. Fix the top cover (3) with the screws (2) and then fix the screw cover (1).
Warning! When changing the side at which the door opens, the appliance must not be connected to the
mains. Remove plug from the mains beforehand.
Installation Requirements
To ensure correct operation this appliance must not be located where the temperatures will fall