Palstar AT5K Owner's Manual - page 8
8 Front Panel Description
1. POWER/SWR METER Dual needle meter displays
FORWARD and REFLECTED power in watts. SWR
is measured where the two needles intersect on the
red scale.
2. PEAK AND PEAK/HOLD Active circuitry is used to
offer peak reading for SSB. This peak feature is
also translated to provide an approximate 2 second
hold at the peak level for easy viewing. NOTE: The
PEAK/HOLD will function only if the PEAK button is
pressed in as well.
3. RANGE The power range is 300 watts on low and
3000 watts on high (push button in for high).
4. FAN The IN position turns on the fan which cools the
internal components of the tuner when using a ser-
vice that requires constant carrier operation (for e.g.
AM or RTTY).
5. BALANCED/COAX Selects either coax feed or bal-
anced feed. A LED shows when balanced mode is
selected.
1
2
3
7
8
9
10
4
5
6