Palstar VHF-1200 Owner's Manual - page 5
5
Specifications
Commander VHF-2000
6 M Linear Power Amplifier
•
Frequency Range: 50 to 54 MHz
•
Modes: USB, LSB, RTTY, FM, & CW
•
Power Requirements: 200/234VAC 50/60 Hz.
•
RF Drive Power: 15-25 W nominal - 35-50 W Max. for full output (1.5 kW PEP on SSB )
•
RF Output: 1500 W maximum, FM or RTTY
•
Input Impedance: 50 Ohm unbalanced; rear panel adjustable
•
Output Impedance: 50 Ohm nominal
•
Antenna Load: 2:1 VSWR maximum
•
Harmonic Suppression: Better than -60 db down @ rated output
•
Intermodulation Distortion: Better than -35 db down @ rated output
•
Weight: 75 lbs (34 kg)
•
Cabinet Size: 18” x 16” x 7.75” (45.7 cm x 40.6 cm x 19.7 cm)
•
Tube Compliment: Two 3CPX800A7 Ceramic Metal Triodes
•
Cooling: Forced air, pressurized chassis