Panamax M7500-PRO Owner's Manual - page 15
13
MAX PRO-SERIES Communication/Configuration Specifications (continued)
Request a list of all configurable
parameters and current settings.
2.8
?LIST_CONFIG
$TRIGGER FOR 1 = triggersource
$TRIGGER FOR 2 = triggersource
$TRIGGER FOR 3 =triggersource
$TRIGGER FOR 4 = triggersource
$TRIGGER FOR HC1 = triggersource
$TRIGGER FOR HC2 = triggersource
$TRIGGER FOR TRIGOUT = triggersource
$DELAY FOR 1 = ondelay offdelay
$DELAY FOR 2 = ondelay offdelay
$DELAY FOR 3 = ondelay offdelay
$DELAY FOR 4 = ondelay offdelay
$DELAY FOR HC1 = ondelay offdelay
$DELAY FOR HC2 = ondelay offdelay
$DELAY FOR TRIGOUT = ondelay offdelay
$BRIGHTNESS = x
$FEEDBACK = x
$LINEFEED = x
QUERIES
(continued)
RESPONSES AND WARNING MESSAGES
If unsolicited feedback is enabled, the following warning messages will be transmitted under the conditions outlined in their description.
Query Description Response
Condition Message
$BANK1 = status
$BANK2 = status
$BANK3 = status
$BANK4 = status
$HC1 = status
$HC2 = status
$TRIGOUT = status
status = { ON, OFF }
if front panel button is ON, $BUTTON = ON
if front panel button is OFF, $BUTTON = OFF
if input trigger is ON, $TRIGIN = ON
if trigger input is OFF, $TRIGIN = OFF
$PWR = OVERVOLTAGE
Outlet bank or trigger output
changes (on/off) state.
When either the front panel but-
ton or input trigger (on/off) sta-
tus changes, a status message is
sent to the controller.
Input voltage rises above the
overvoltage threshold.
3.1
3.2
3.3