Panamorph Paladin Installation Manual - Cleaning
Panamorph Paladin and Phoenix Lens Installation Guide, V1.4 Page | 7
Epson: Menu -> Extended -> Panel Alignment. See the user manual for more
detailed discussion regarding “Adjusting the Color Convergence”. The first step of
Epson’s ECC allows you to adjust the four image corners to impact the entire image.
This very quickly implements ECC but you may still wish to continue with finer
adjustments per the manual.
JVC: Menu -> Installation -> Pixel Adjust. Please refer to the “Zone Adjust Operation
Procedure” in the user manual.
Sony: Menu -> Installation -> Panel Alignment. Please refer to the section on “Panel
Alignment -> Zone” in the user manual.
CLEANING
In most applications lenses do not benefit very much from cleaning – a bit of dust will
not significantly impact image clarity. However, in today’s high performance home
cinemas with very dark rooms a small build-up of dust or other foreign matter on your
projector lens or your Panamorph lens can produce a noticeable reduction in contrast.
The most effective cleaning approach is to simply blow off any dust. If there is any
residue or build-up then it is recommended that you clean the optics with professional
lens cleaning supplies such as from a camera store while the lens is in front of the lit
beam of the projector. This will allow you to quickly see both the results of cleaning
and also if you are causing any damage.
LIMITED WARRANTY
Panamorph, Inc. warrants this product to be free of defects in original workmanship and
material for a period of twenty-four months from the date of manufacture. During this
period, a defective unit may be repaired or replaced, at the discretion of Panamorph,
Inc., by returning it in its original packaging with a copy of your receipt. This warranty
does not cover damage resultant from lack of prudent care, accident or misuse
(including the use of motor systems with lenses or other products in ways not intended),
or any cosmetic damage not reported within 15 days of purchase. Damages are limited
to the cost of the product. A service charge may be applied to any returned product
requiring cosmetic attention, or to the repair of any damage not covered under this
warranty. For further information please contact sales@panamorph.com.