- DL manuals
- Panasonic
- Adapter
- BL-PA300KTA - High Definition Power Line Communication Ethernet Adaptor Twin
- Operating Instructions Manual
Panasonic BL-PA300KTA - High Definition Power Line Communication Ethernet Adaptor Twin Operating Instructions Manual - Useful Information
23
[For assistance, please call: 1-800-272-7033]
Useful Information
Troubleshooting
Performance issues
The troubleshooting notes in this section are provided to resolve the
following types of performance issues.
•
Inability to transmit data over the HD-PLC network
•
Slow data transmission speeds (interrupted video or audio, slow
download speeds, etc.)
•
Intermittent or varied performance (faster at certain times, slower at
others)
•
Interference caused by an adaptor
•
The PLC indicator is not lit in green even though you have registered
the adaptor.
Troubleshooting notes
In most cases, performance issues such as those listed above can be
resolved by performing the steps in the following troubleshooting notes.
Each note contains several steps. After you perform each step, test the
terminal’s network speed (see page 17) to see if the issue has been
resolved. For more information, access the Panasonic PLC Support Site at:
http://panasonic.co.jp/pcc/products/en/plc/
Troubleshooting note #1:
Adaptor issues
Perform each step until the performance issue is solved.
1.
Unplug the master and terminal adaptors, then plug them into the wall
outlets again. The indicators on the adaptors will light if the adaptors
are receiving power. If a wall outlet has a power switch, make sure it is
turned on.
2.
Confirm that all LAN cables are securely connected to each adaptor.
Use high-quality LAN cables. Also confirm that other network devices
(routers, hubs, etc.) are turned on as well as properly connected and
configured.
3.
Try connecting the master and/or terminal adaptor to a different wall
outlet.
BL-PA300KTA_OI.book Page 23 Wednesday, August 6, 2008 10:08 AM
Summary of BL-PA300KTA - High Definition Power Line Communication Ethernet Adaptor Twin
Page 1
Operating instructions plc adaptor starter pack power line communication model no. Bl-pa300kta set of 2 adaptors (master and terminal) plc lan master hd -pl c bl-p a3 00 se tup plc lan master hd -pl c bl -pa 300 se tup operating instructions .............................................................
Page 2: Introduction
Important notes: for best results, connect this product directly to a wall outlet. This product may not function normally in certain electrical environments. See page 7 for more information. Please read this document before use and save this document for future reference. Introduction important safe...
Page 3: Introduction
3 [for assistance, please call: 1-800-272-7033] introduction introduction thank you for purchasing a panasonic hd-plc product. Main features flexible and stable network access anywhere in your home the bl-pa300a offers the next generation in home networking: high definition power line communication ...
Page 4: Introduction
4 introduction included items confirm that the following items are included with this product. Additional items can be ordered by calling 1-800-332-5368. Available accessories you can add additional adaptors as necessary. Up to 16 adaptors in all (including the 2 adaptors included with this product)...
Page 5: Introduction
5 [for assistance, please call: 1-800-272-7033] introduction trademarks • linux ® is the registered trademark of linus torvalds in the u.S. And other countries. • hd-plc or hd-plc mark is a registered trademark or trademark of panasonic corporation in japan and in other countries. • all other tradem...
Page 6: Introduction
6 introduction important safety instructions when using this product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1. Read and understand all instructions. Keep this document for future reference. 2. Follow all instructions in thi...
Page 7: Introduction
7 [for assistance, please call: 1-800-272-7033] introduction electrical environment information hd-plc adaptors communicate with each other using the existing electrical wiring in your home, and may be affected by electrical noise or the length of your home’s wiring. Keep the following in mind when ...
Page 8: Introduction
8 introduction electrical wiring hd-plc adaptors communicate with each other using the existing electrical wiring in your home. If 2 wall outlets are separated by a great length of electrical wiring, the adaptors connected to those outlets may not be able to communicate with each other. For more inf...
Page 9: Introduction
9 [for assistance, please call: 1-800-272-7033] introduction security information 1. With any network connection, security is a concern. The bl-pa300a provides security to prevent unauthorized access to your network. • only terminals that are registered to the master adaptor can communicate with the...
Page 10: Introduction
10 introduction security notices for when sending an adaptor for service please note the following when sending an adaptor for servicing. • reset the adaptor before sending it for servicing. • after your master adaptor is serviced, you must register all your terminals to the master again. • after a ...
Page 11: Introduction
11 [for assistance, please call: 1-800-272-7033] introduction how does it work? Plc adaptors allow you to create a home network without installing lan connection points or wireless routers. They connect to the wall outlets in your home, and communicate with each other using your home’s existing elec...
Page 12: Introduction
12 introduction note • only connect the adaptor to a switching hub (repeater hubs cannot be used). Master and terminal adaptors before using your adaptors, it is important to understand the concept of a “master” adaptor and a “terminal” adaptor. An hd-plc network contains at least 2 adaptors. One (a...
Page 13: Introduction
13 [for assistance, please call: 1-800-272-7033] introduction main unit (1) plc indicator lights to indicate that the adaptor is connected to the hd-plc network. For more information, see page 19. (2) lan indicator lights when a lan cable is connected to the adaptor, and flashes when data is being s...
Page 14: Introduction
14 introduction (7) factory default reset button used to reset the adaptor and erase its registration (see page 20). Bl-pa300kta_oi.Book page 14 wednesday, august 6, 2008 10:08 am.
Page 15: Installation
15 [for assistance, please call: 1-800-272-7033] installation installation placing the adaptors refer to the information on page 7 when selecting a location to place your adaptors. Note • if you have purchased additional adaptors, make sure you have registered them to the master (see page 21) before...
Page 16: Installation
16 installation connecting adaptors to network devices once you have placed the adaptors where you plan to use them and are satisfied with the network speed test results for your terminals (see page 17), follow the procedure below to connect your adaptors to your network devices (broadband router, h...
Page 17: Useful Information
17 [for assistance, please call: 1-800-272-7033] useful information useful information testing a terminal’s network speed once you have connected the adaptors where you plan to use them, follow the procedure below to test the speed of each terminal’s network connection to the master. Make sure that ...
Page 18: Useful Information
18 useful information 4. If you are not satisfied with the speed test result, connect the terminal to a different wall outlet and repeat the test. Note • the fastest and slowest speeds are displayed by the indicators alternatively for about 6 seconds. If there is little difference between the fastes...
Page 19: Useful Information
19 [for assistance, please call: 1-800-272-7033] useful information understanding the indicators plc green, lit the adaptor is successfully connected to the hd-plc network. Green, flashing the terminal is being registered to the master. Green, flashes once every 5 seconds the adaptor is registered t...
Page 20: Useful Information
20 useful information resetting an adaptor normally an adaptor does not need to be reset, however, you may need to reset an adaptor if: • you are concerned that another adaptor may have been accidentally registered to your master. (for example, the adaptor of someone who lives in the same apartment ...
Page 21: Useful Information
21 [for assistance, please call: 1-800-272-7033] useful information registration follow the procedure below when you want to: • add an additional terminal to your hd-plc network. • re-register the master and terminal after resetting the master. 1. Confirm that the mode selector of the master adaptor...
Page 22: Useful Information
22 useful information 7. When the plc indicator of each adaptor lights in green, registration was successful. • if the plc indicators do not light in green, see page 23. 8. Wait about 30 seconds, then unplug the adaptors and place them where you plan to use them (see page 15). Note • while registeri...
Page 23: Useful Information
23 [for assistance, please call: 1-800-272-7033] useful information troubleshooting performance issues the troubleshooting notes in this section are provided to resolve the following types of performance issues. • inability to transmit data over the hd-plc network • slow data transmission speeds (in...
Page 24: Useful Information
24 useful information 4. If you are not able to plug an adaptor directly into a wall outlet and must use a power strip, make sure the power strip is plugged directly into a wall outlet and not to another power strip. 5. Make sure the power strip does not have a noise filter or a surge protector, as ...
Page 25: Useful Information
25 [for assistance, please call: 1-800-272-7033] useful information troubleshooting note #3: eliminating interference caused by an adaptor this product may interfere with the following appliances: • short wave radios • lights or lamps which have a touch-sensitive on/off feature • other plc adaptors ...
Page 26: Useful Information
26 useful information specifications all specifications are subject to change without notice. Power line communication interface lan interface standard hd-plc actual transmission speed *1 *1 speed between bl-pa300a adaptors. Results may vary depending on electrical conditions, network environment, a...
Page 27: Useful Information
27 [for assistance, please call: 1-800-272-7033] useful information user interface general hd-plc interface indicators plc (green, red) lan (green, orange) master (green) other mode selector (master or terminal switch) setup button factory default reset button operational environment 0–40 °c (32–104...
Page 28: Useful Information
28 useful information adaptor maintenance screen you can access an adaptor’s maintenance screen using your computer’s web browser to perform the following tasks: • update adaptor firmware • remove terminal adaptor registration • confirm adaptor status and network information • change adaptor ip addr...
Page 29: Useful Information
29 [for assistance, please call: 1-800-272-7033] useful information fcc and other information this equipment has been tested and found to comply with the limit for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmf...
Page 30: Useful Information
30 useful information environment do not place the unit in a room where the temperature is less than 0 °c (32 °f) or greater than 40 °c (104 °f). Allow 10 cm (4 in.) clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight. Routin...
Page 31: Instrucciones De Operación
Instrucciones de operación paquete inicial del adaptador plc comunicación a través de la línea eléctrica modelo no. Bl-pa300kta juego de 2 adaptadores (master y terminal) plc lan master hd -pl c bl -pa 300 setu p plc lan master hd -pl c bl -pa 300 setu p tabla de contenido introducción instrucciones...
Page 32: Introducción
32 introducción introducción gracias por comprar un producto hd-plc de panasonic. Características principales acceso de red flexible y estable desde cualquier punto de su hogar el bl-pa300a ofrece la última generación de redes domésticas: comunicación a través de la línea eléctrica de alta definició...
Page 33: Introducción
33 [para obtener asistencia, por favor llame: 1-800-272-7033] introducción elementos incluidos verifique que el producto incluya los siguientes elementos. Los artículos adicionales se pueden ordenar llamando al 1-800-332-5368. Accesorios disponibles si es necesario, puede agregar adaptadores adicion...
Page 34: Introducción
34 introducción marcas comerciales • linux ® es la marca comercial registrada de linus torvalds en los ee.Uu. Y en otros países. • las marcas hd-plc o hd-plc son marcas registradas o marcas comerciales de panasonic corporation en japón y otros países. • todas las demás marcas comerciales identificad...
Page 35: Introducción
35 [para obtener asistencia, por favor llame: 1-800-272-7033] introducción instrucciones de seguridad importantes al usar este producto, siempre se deben seguir las precauciones de seguridad básicas para reducir el riesgo de incendios, descargas eléctricas o lesiones personales. 1. Lea y comprenda t...
Page 36: Introducción
36 introducción información sobre el entorno eléctrico los adaptadores hd-plc se comunican entre sí usando el cableado eléctrico existente en su casa, y pueden verse afectados por el ruido eléctrico o por la longitud del cableado de su casa. Recuerde lo siguiente al colocar cada adaptador. Tomas de ...
Page 37: Introducción
37 [para obtener asistencia, por favor llame: 1-800-272-7033] introducción cableado eléctrico los adaptadores hd-plc se comunican entre sí usando el cableado eléctrico existente en su casa. Si 2 tomas de corriente están separadas por una gran distancia de cableado eléctrico, es posible que los adapt...
Page 38: Introducción
38 introducción información de seguridad 1. En cualquier conexión de red, la seguridad es una preocupación. El bl-pa300a ofrece seguridad para evitar el acceso no autorizado a su red. • sólo los terminales registrados en el adaptador master pueden comunicarse con la red. • una terminal puede registr...
Page 39: Introducción
39 [para obtener asistencia, por favor llame: 1-800-272-7033] introducción avisos de seguridad para enviar un adaptador a servicio tome en cuenta lo siguiente al enviar un adaptador a servicio. • reinicie el adaptador antes de enviarlo a servicio. • después de que se le haya dado servicio a su adapt...
Page 40: Introducción
40 introducción ¿cómo funciona? Los adaptadores plc le permiten crear una red doméstica sin instalar puntos de conexión lan ni enrutadores inalámbricos. Se conectan a las tomas de corriente de su casa y se comunican entre sí usando el cableado eléctrico ya existente. Al conectar un dispositivo de re...
Page 41: Introducción
41 [para obtener asistencia, por favor llame: 1-800-272-7033] introducción nota • sólo conecte el adaptador a un concentrador de conmutación (no se pueden usar los concentradores repetidores). Adaptador master y adaptadores terminales antes de utilizar los adaptadores, es importante comprender el co...
Page 42: Introducción
42 introducción unidad principal (1) plc indicador se enciende para indicar que el adaptador está conectado a la red hd-plc. Para obtener más información, consulte página 48. (2) lan indicador se enciende cuando hay un cable lan conectado al adaptador y parpadea cuando se envían o reciben datos. Par...
Page 43: Introducción
43 [para obtener asistencia, por favor llame: 1-800-272-7033] introducción (7) factory default reset botón se utiliza para reiniciar el adaptador y eliminar su registro (consulte página 50). Bl-pa300kta_oi.Book page 43 wednesday, august 6, 2008 10:08 am.
Page 44: Instalación
44 instalación instalación colocación de adaptadores consulte la información en página 36 al elegir un lugar para colocar sus adaptadores. Nota • si compró adaptadores adicionales, asegúrese de registrarlos en el master (consulte página 51) antes de colocarlos en el lugar donde planea usarlos. 1. Co...
Page 45: Instalación
45 [para obtener asistencia, por favor llame: 1-800-272-7033] instalación conexión de los adaptadores a los dispositivos de red una vez que haya colocado los adaptadores donde pretende usarlos y esté satisfecho con los resultados de las pruebas de velocidad de red de los terminales (consulte página ...
Page 46: Información Útil
46 información útil información útil prueba de la velocidad de red de un terminal una vez que haya conectado los adaptadores en los puntos que planea usarlos, siga el procedimiento que se describe a continuación para probar la velocidad de la conexión de red de cada terminal con el master. Asegúrese...
Page 47: Información Útil
47 [para obtener asistencia, por favor llame: 1-800-272-7033] información útil 4. Si no está satisfecho con el resultado de la prueba de velocidad, conecte el terminal a una toma de corriente diferente y repita la prueba. Nota • los indicadores muestran las velocidades más rápida y más lenta en form...
Page 48: Información Útil
48 información útil cómo entender los indicadores plc verde, encendido el adaptador está conectado correctamente a la red hd-plc. Verde, intermitente el terminal está registrándose en el master. Verde, se enciende cada 5 segundos el adaptador está registrado en el master, pero no está conectado a la...
Page 49: Información Útil
49 [para obtener asistencia, por favor llame: 1-800-272-7033] información útil master verde, encendido el adaptador está configurado como master. Verde, se enciende durante 10 segundos un terminal se ha registrado correctamente en el master. Apagado el adaptador no está configurado como master. Bl-p...
Page 50: Información Útil
50 información útil reinicio de un adaptador generalmente no es necesario reiniciar los adaptadores; sin embargo, es posible que tenga que reiniciar un adaptador si: • le preocupa que otro adaptador pueda haberse registrado accidentalmente en su master. (por ejemplo, el adaptador de alguien que viva...
Page 51: Información Útil
51 [para obtener asistencia, por favor llame: 1-800-272-7033] información útil registro siga este procedimiento para: • agregar un terminal adicional a la red hd-plc. • volver a registrar el master y el terminal después de reiniciar el master. 1. Verifique que el selector de modo del adaptador maste...
Page 52: Información Útil
52 información útil 6. Presione el setup botón en ambos adaptadores durante 1 segundo aproximadamente. El orden en que se presionen es irrelevante. • el indicador plc de cada adaptador comenzará a parpadear en verde. • asegúrese de presionar el botón setup de cada adaptador con 3 segundos de interva...
Page 53: Información Útil
53 [para obtener asistencia, por favor llame: 1-800-272-7033] información útil solución de problemas problemas de funcionamiento las notas para la solución de problemas de esta sección sirven para resolver los siguientes tipos de problemas de funcionamiento. • incapacidad de transmitir datos a travé...
Page 54: Información Útil
54 información útil 4. Si no puede conectar un adaptador directamente a una toma de corriente y tiene que utilizar una regleta de conectores, asegúrese de conectar la regleta directamente a una toma de corriente y no a otra regleta. 5. Asegúrese de que la regleta de conectores no tenga un filtro de ...
Page 55: Información Útil
55 [para obtener asistencia, por favor llame: 1-800-272-7033] información útil nota para la solución de problemas no. 3: eliminación de interferencias causadas por un adaptador este producto podría interferir con los siguientes aparatos: • radios de onda corta • luces o lámparas con función de encen...
Page 56: Información Útil
56 información útil especificaciones todas las especificaciones están sujetas a cambios sin previo aviso. Interfaz de comunicación a través de la línea eléctrica interfaz lan estándar hd-plc velocidad de transmisión real *1 *1 velocidad entre los adaptadores bl-pa300a. Los resultados pueden variar s...
Page 57: Información Útil
57 [para obtener asistencia, por favor llame: 1-800-272-7033] información útil interfaz de usuario generalidades interfaz hd-plc indicadores plc (verde, rojo) lan (verde, naranjo) master (verde) otros selector de modo (interruptor master o terminal) botón setup botón factory default reset entorno op...
Page 58: Información Útil
58 información útil pantalla de mantenimiento del adaptador puede acceder a la pantalla de mantenimiento de un adaptador usando el navegador web de su computadora para realizar las siguientes tareas: • actualizar el firmware del adaptador • eliminar el registro del adaptador terminal • confirmar el ...
Page 59: Limited Warranty
59 [for assistance, please call: 1-800-272-7033] limited warranty limited warranty limited warranty limited warranty coverage if your product does not work properly because of a defect in materials or workmanship, panasonic consumer electronics company or panasonic puerto rico, inc. (collectively re...
Page 60: Limited Warranty
60 limited warranty limited warranty limits and exclusions this limited warranty only covers failures due to defects in materials or workmanship, and does not cover normal wear and tear or cosmetic damage. The limited warranty also does not cover damages which occurred in shipment, or failures which...
Page 61: Customer Services
61 [for assistance, please call: 1-800-272-7033] customer services customer services customer services accessory purchases service in puerto rico obtain product information and operating assistance; locate your nearest dealer or service center; purchase parts and accessories; or make customer servic...
Page 62: Notes
62 notes bl-pa300kta_oi.Book page 62 wednesday, august 6, 2008 10:08 am.
Page 63: Notes
63 [for assistance, please call: 1-800-272-7033] notes bl-pa300kta_oi.Book page 63 wednesday, august 6, 2008 10:08 am.
Page 64
Kk0508mj1088 pnqx1295ya panasonic consumer electronics company, division of panasonic corporation of north america panasonic communications co., ltd. 2008 panasonic puerto rico, inc. Carefully pack your unit, preferably in the original carton. Attach a letter, detailing the symptom, to the outside o...