Panasonic CS-E12DKRW Operating Instructions Manual - page 7
7
TEMP
AIR SWING
1
2
3
TIMER
ON
OFF
CANCEL
SET
COOL
FAN
CLOCK
OFF/ON
MODE
POWERFUL
QUIET
RESET
CHECK
FAN SPEED
AUTO
AUTO
• To ventilate air in the room.
• There are 5 selections in addition to
automatic vertical airflow direction.
• If automatic vertical airflow direction
has been set, the louver swings up
and down automatically.
• For HEATING operation, the air
blows horizontally for a while, then
starts to blow downwards.
• To ventilate air in the room.
• There are 5 selections in addition
to automatic horizontal airflow
direction.
• If automatic horizontal airflow
direction has been set, the louver
swings left and right automatically.
• For HEATING operation, the airflow
louvers start to swing left/right after
the temperature rises.
• Please do not adjust the vertical and
horizontal airflow direction louver
manually.
AUTO AIR
SWING
MANUAL
AIR SWING
Fan Speed, Air Swing, Ion
HOW TO OPERATE
■
Operation Details
• To provide fresh air effect by
producing negative ions.
• Ion operation could be activated
independently.
• Ion operation could not be activated
if other indoor unit is activating
heating operation.
• Press
OFF/ON
button to stop the
operation. During Ionizer only
operation, Quiet and Powerful could
not be activated.
ION
Enables ion
operation.
ION
Select fan
speed.
FAN
SPEED
Adjust the
vertical or
horizontal airflow
direction louver.
AIR SWING
• To provide you with the various fan
speed selections.
• There are 5 levels of fan speed in
addition to automatic fan speed.
• Automatic fan speed:
The speed of the indoor fan is
automatically adjusted according to
the operation.
FAN SPEED
AIR SWING
Hint
Troubleshooting
●
Mist emerges from indoor unit.
➤
Condensation effect due to cooling process.
●
Remote control/display does not work.
➤
Check whether batteries are correctly inserted or need replacement.
●
Outdoor unit emits water/steam.
➤
Condensation or evaporation happens at piping surface.
●
The room has a peculiar odour.
➤
This may be a damp smell emitted by the wall, carpet, furniture or
clothing in the room.
●
Approximately 10% of electricity can be saved if you set the temperature 1°C higher in cooling operation or 2°C lower in heating
operation than the desired temperature.
For DK-series
indoor unit
F565262 EN(1-12).indd 7
1/26/2006 3:17:37 PM