Panasonic CS-E12NKUAW Installation Manual - page 6
Other manuals for CS-E12NKUAW:
Information, Quick manual, Operating Instructions Manual, Service Manual, Operating Instructions Manual
of
9
25
11.2.5
Wiring Stripping and connecting requirement
11.2.5.1
Cutting and flaring the piping
1 Please cut using pipe cutter and then remove the burrs.
2 Remove the burrs by using reamer. If burrs are not removed, gas leakage may be caused. Turn the piping
end down to avoid the metal powder entering the pipe.
3 Please make flare after inserting the flare nut onto the copper pipes.