Panasonic CS-MC12DKV Operating Instructions Manual - page 6
6
●
Press CLOCK more than 10 seconds to change the time format from 24 hours to AM/PM format.
●
For your convenience, you could set the air conditioner to operate automatically by using both ON and OFF timer.
Hint
Troubleshooting
●
TIMER indicator always on.
➤
Timer is activated and the setting will repeat itself daily.
●
POWER indicator is blinking 15 minutes before ON
timer is activated.
➤
The unit is determining the operation mode by sensing the room
temperature. This happens when it has been set to AUTO operation
mode.
HOW TO OPERATE
1
1
Select ON or
OFF timer.
2
2
Set the
desired time.
3
3
Confi rm the
setting.
Timer
Timer
CANCEL
CANCEL
Cancel the
selected timer.
■ Operation Details
• Use the ON timer to turn on the air
conditioner at the desired time. This
will give you a cooling environment,
e.g. when you return from work or
wake up.
• When the ON timer is set, operation
will start 15 minutes before the
actual set time.
• Use the OFF timer to stop the air
conditioner operation at the desired
time. This can save electricity while
you are going out or sleeping.
• The set timer will repeat daily once
it is set.
• If there is a power failure, you can
press SET button to restore the
previous setting once the power is
resumed.
• If the timer is cancelled, you can
restore the previous setting by
pressing SET button.
TIMER
● Ensure the clock on the remote control has been set
correctly.
● You could use the ON and OFF timers at the same time.
● To cancel either the ON or OFF timer, press
or
,
then press
.