Panasonic DMPBD10A - BD/DVD PLAYER Operating Instructions Manual - Easy Setting
11
RQT8966
Easy Setting
After connecting your new player and pressing the standby/on button, a screen will appear and you will be prompted to perform setup for the basic
settings. Please follow the guide and perform setup.
.
Remote control setting
You can configure the TV operation buttons on the remote control to turn the television on or set to standby mode, change the television input
mode, and change the television channel and volume.
Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close
together. Use “1”, the factory set code, under normal circumstances.
Preparation
Turn on the television and select the appropriate video input on the
television.
1
Press [
Í BD].
Setup screen appears.
2
Follow the on-screen instructions and make the
settings with [
3, 4, 2, 1] and [ENTER].
“Language”
§
, “TV Aspect” and “Speaker” are set. You can also
change their settings individually (“Display” and “Connection” tab
➡ 22, 23).
≥You can perform this setup anytime
by selecting “Easy Setting” in
Setup menu (
➡ 23, “Others” tab).
§
“Language” can only be selected in
the United Kingdom, Republic of
Ireland and Continental European
models.
Setting the television operation
Point the remote control at the television.
1
While pressing [RETURN], enter the code with the numbered
buttons.
e.g., 01: [0]
➡ [1]
2
Test by turning on the television and changing channels.
≥
≥If your television brand has more than
one code listed, select the one that
allows correct operation.
≥If your television brand is not listed or
if the code listed for your television
does not allow control of your
television, this remote control is not
compatible with your television. Use
the television’s remote control.
For the United Kingdom, Republic of Ireland and Continental Europe
For Australia and New Zealand
Manufacturer and Code No
Manufacturer and Code No
Panasonic
01/02/03/04/
45
IRRADIO
30
SABA
10
Panasonic/
National
01/02/03/04
AIWA
35
ITT
25
SALORA
26
GOLDSTAR/LG
15/16
AKAI
27/30
JVC
17/39
SAMSUNG
31/32/43
HITACHI
08
BLAUPUNKT 09
LOEWE
07/46
SANSUI
05/31/33
JVC
07
BRANDT
10/15
METZ
28/31
SANYO
21
MITSUBISHI
09/10
BUSH
05/06
MITSUBISHI
06/19/20
SBR
06
NEC
13
CURTIS
31
MIVAR
24
SCHNEIDER
05/06/29/30/31
PHILIPS
12
DESMET
05/31/33
NEC
36
SELECO
06/25
SAMSUNG
12/17/18
DUAL
05/06
NOKIA
25/26/27
SHARP
18
SANYO
14/19
ELEMIS
31
NORDMENDE
10
SIEMENS
09
SHARP
11
FERGUSON
10
ORION
37
SINUDYNE
05/06/33
SONY
05
GOLDSTAR/LG
31
PHILIPS
05/06
SONY
08
TOSHIBA
06
GOODMANS 05/06/31
PHONOLA
31/33
TELEFUNKEN 10/11/12/13/14
GRUNDIG
09
PIONEER
38
THOMSON
10/15/44
HITACHI
22/23/31/40/
41/42
PYE
05/06
TOSHIBA
16
INNO HIT
34
RADIOLA
05/06
WHITE
WESTINGHOUSE
05/06
TIPS
NOTE
When other Panasonic products respond to this remote control
1
Press [SETUP].
2
Press [
3, 4] to select “Others” and press [1].
3
Press [
3, 4] to select “Remote Control” and press [ENTER].
4
Press [
3, 4] to select the code (1, 2, or 3)
and press [ENTER].
5
To change the code on the remote control
While pressing [ENTER], press and hold
the numbered button ([1], [2] or [3]) for
more than 2 seconds.
6
Press [ENTER].
When the following indicator
appears on the unit’s display and
you are unable to operate the unit
≥Press and hold [ENTER] and the
indicated number button at the
same time for more than 2
seconds.
Others
Setup
Disc
Picture
Sound
Display
Connection
HDMI
Remote Control
Press
“
n” and “ENTER” together
for more than 2 seconds on the remote
control.
ENTER
RETURN
NOTE
D
R
The unit’s remote control code
Getting started
11 Easy Setting / Remote control setting
Ge
tti
ng s
ta
rte
d
DMP-BD10A.book Page 11 Thursday, March 15, 2007 7:45 PM