Panasonic DMPBD10A - BD/DVD PLAYER Operating Instructions Manual - Frequently Asked Questions
25
RQT8966
Frequently asked questions
Refer to the following items if you have any doubts about unit operations.
Setup
Page
Disc
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart
do not solve the problem, consult your dealer for instructions.
The following do not indicate a problem with this unit:
≥Regular disc rotating sounds.
≥Image disturbance during search.
To reset this unit
Page
Power
(Continued on the next page)
What do I need to play multi channel
surround sound?
≥Connect to...
–an amplifier/receiver compatible with HDMI.
–an amplifier/receiver with 7.1ch/5.1ch AUDIO IN.
–an amplifier/receiver with a built-in (Dolby Digital, DTS or MPEG) decoder.
9, 10
Are headphones and speakers
directly connected to the unit?
≥You cannot directly connect them to the unit. Connect through the amplifier/receiver, etc.
9, 10
Is my television progressive output
compatible?
≥All Panasonic televisions that have 625 (576)/50i · 50p, 525 (480)/60i · 60p input
terminals are compatible. Consult the manufacturer if you have another brand of
television.
—
My television has a Scart terminal
and component video input terminal.
Which should I connect with?
≥If you have a regular television (CRT: cathode ray tube) we recommend using the Scart
terminal. You can enjoy high-quality RGB video from this unit by connecting to an RGB
compatible television.
If you have an LCD/plasma television or LCD projector compatible with progressive
scan, connect through the component video terminals for high-quality progressive video.
If you have a CRT television or a multi-system television using PAL mode that is
compatible with progressive scan, we cannot recommend progressive output as some
flickering can occur.
8, 9
Can I play BD-Video, DVD-Video,
DVD-Audio and Video CDs bought in
another country?
≥You cannot play:
–BD-Video discs that do not include region “B”.
–DVD-Video discs that do not include your region number or “ALL”. Refer to the cover of
these operating instructions for more information about your region number.
Refer to the disc’s jacket for more information.
Cover
Cover
Can BD-Video/DVD-Video that does
not have a region code/number be
played?
≥The region management information for BD-Video/DVD-Video indicates that the disc
conforms to industry standards. You cannot play discs that do not conform to industry
standards or do not have a region code or number.
—
Please tell me about disc
compatibility with this unit.
≥This unit plays BD-Video, DVD-Video, DVD-Audio, Video CD, CD, DVD-RAM (DVD
Video Recording format/AVCHD format/JPEG), DVD-R/RW (DVD-Video format, DVD
Video Recording format and AVCHD format), DVD-R DL (DVD-Video format, DVD
Video Recording format and AVCHD format), +R, +RW and +R DL.
≥This unit also plays CD-R/CD-RW discs which have been recorded in one of the
following standards: CD-DA, Video CD, MP3 and still pictures (JPEG). Close the
session after recording.
≥You cannot write to a disc with this unit.
4
4
—
To return to the factory preset
(No setting)
≥Reset the unit as follows:
1 Press [
Í/I] on the unit to set to standby mode.
2 Press and hold [
5/9], [
“HELLO” appears on the display.
3 Wait until “TEST” appears next.
4 Press [
Í/I] on the unit to set to standby mode.
5 Disconnect the AC mains lead. Wait one minute, then reconnect it.
—
To return all the settings other
than the ratings level to the
factory preset
≥Select “Yes” in “Default Settings” in the Setup menu (“Others” tab).
This returns all values in the Setup menus and On-screen menu, except for the ratings level
to the default settings.
23
To restore the unit if it freezes
due to one of the safety
devices being activated
≥Press and hold [Í/I] on the main unit for 10 seconds. (The settings remain unchanged.)
—
No power.
≥Insert the AC mains lead securely into a working household mains socket.
8, 9
The unit switches to standby
mode.
≥This is a power saving feature. It can be changed if desired using “Off Timer” in the Setup menu
(“Others” tab).
≥One of the unit’s safety devices is activated. Press [Í/I] on the main unit to turn the unit on.
23
—
Reference
11 Frequently asked questions / Troubleshooting guide
Ref
e
rence
Se
tt
in
gs
DMP-BD10A.book Page 25 Thursday, March 15, 2007 7:45 PM