Panasonic DMPBD79 Operating Instructions Manual - page 33
Referen
c
e
33
VQT4W89
The images from this unit do not appear on
the TV.
Picture is distorted.
¾
An incorrect resolution is selected in “HDMI
Video Format”. Reset the setting as follows:
1 Turn the unit on.
2 Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
Set the item again. (> 25)
– When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD audio are not output properly,
select “Yes” in “Default Settings” and make
proper settings. (> 29)
Video is not output in high-definition.
¾
Confirm that “HDMI Video Format” in the
Setup menu is set properly. (> 25)
A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
¾
Confirm the “TV Aspect” is set properly.
(> 28)
¾
Adjust the aspect setting on the TV.
Cannot hear the desired audio type.
¾
Check the connections and the “Digital Audio
Output” settings. (> 9, 26)
Disc cannot be played.
¾
The disc is dirty. (> 5)
¾
The disc is not finalized. (> 7)
Still pictures (JPEG) do not play back
normally.
¾
The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can’t play back BD-Live.
¾
Confirm that this unit is connected to the
broadband Internet. (> 10)
¾
Confirm the “BD-Live Internet Access”
settings. (> 28)
¾
Confirm a USB device is connected to the
USB port. (> 14)
Picture
– INFO LED and POWER LED start to flash.
3 Press and hold [8] and the blue button on the
remote control at the same time for more than
5 seconds.
¾
The unit and TV are using different video
systems.
1 Turn the unit on.
2 Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– INFO LED and POWER LED start to flash,
and “00RET” is displayed on the screen.
3 Press [
1] (right) repeatedly on the remote
control until “05P/N” is displayed on the
screen.
4 Press and hold [OK] for more than
5 seconds.
The system switches from PAL to NTSC or
vice versa.
¾
The system used on the disc doesn’t match
your TV.
– PAL discs cannot be correctly viewed on an
NTSC TV.
Audio
Playback
DMP-BD79_EG-VQT4V15_mst.book 33 ページ 2013年1月17日 木曜日 午後2時36分