Panasonic DMPBDT100 - 3D BLU-RAY DISC PLAYER Operating Instructions Manual - page 10
Downloaded from www.vandenborre.be
10
VQT2U34
STEP 2 : Connecting to an amplifier/receiver
Digital Audio
∫ Via an HDMI AV OUT terminal
– It is possible to playback 3D videos when the
connected TV and amplifier/receiver are 3D
compatible.
∫ Via an OPTICAL terminal
≥ Set “HDMI Video Mode” and “HDMI Audio Output” to
“On” (> 30).
≥ Set “Digital Audio Output” depending on the connected
amplifier/receiver (> 29).
≥ The HDMI connection supports VIERA Link “HDAVI
Control” (> 25).
≥ When connecting to an amplifier/receiver that is not
3D-compatible, you can enjoy 3D videos by connecting
this unit to the TV via an HDMI terminal (> 8), and to the
amplifier/receiver via the OPTICAL terminal.
≥ When connecting a TV (> 8) with HDMI AV OUT
terminal, set “HDMI Audio Output” to “Off” (> 30).
≥ Set “Digital Audio Output” depending on the used
terminal and connected amplifier/receiver (> 29).
HDMI IN
HDMI IN
HDMI IN
Multi channel
speakers
Amplifier/receiver
HDMI cable
HDMI cable
OPTICAL IN
Amplifier/receiver
Optical cable
(10)
DMP-BDT100EG-VQT2U34.book 10 ページ 2010年6月22日 火曜日 午前11時0分