Panasonic DMPBDT300 - 3D BLU-RAY DISC PLAYER Operating Instructions Manual - page 5
5
VQT2J89
G
e
tti
n
g
started
Control reference guide
1
Turn the unit on and off (> 14)
2
Open or close the disc tray (> 17)
CAUTION
Do not place objects in front of the unit. The disc tray may
collide with objects when it is opened, and this may cause
malfunction.
3
[CANCEL] : Cancel
[For[Australia,[New[Zealand][and[Asia]
Select title numbers, etc./Enter numbers or characters
(
> 16, 24)
[For]Middle]East]
Select title numbers, etc./Enter numbers (> 16)
4
Basic playback control buttons (> 18)
5
Show status messages (> 18)
6
Show Top menu/DIRECT NAVIGATOR (> 18)
7
Selection/OK, Frame-by-frame (> 18)
8
Show OPTION menu (> 19)
9
Coloured buttons (red, green, yellow, blue)
These buttons are used when;
≥ Operating a BD-Video disc that includes Java
TM
applications (BD-J).
≥ Displaying “Title View” and “Album View” screens. (> 23)
≥ Operating contents of VIERA CAST. (> 24)
10 Show Setup menu (> 30)
11 Switch on/off Secondary Video (Picture-in-picture) (> 20)
12 Transmit the remote control signal
13 TV operation buttons (> 16)
You can operate the TV through the unit’s remote control.
[Í TV] : Turn the television on and off
[AV] : Switch the input select
[i j VOL] : Adjust the volume
[W X CH] : Channel select
14 Adjust the volume of an amplifier/receiver.(> 16)
15 Mute the sound of an amplifier/receiver.
16 Select audio (> 18)
17 [For[Australia,[New[Zealand][and[Asia]
Displays the Home screen of the VIERA CAST (> 24)
18 Exit the menu screen
19 Show Pop-up menu (> 18)
20 Show FUNCTION menu (> 17)
21 Return to previous screen
22 Select drive (BD/DVD/CD, SD card or USB device) (> 17)
23 Show playback menu (> 28)
24 [For]Middle]East]Reproduce more natural audio (> 29)
':+6
/76'
1-
%*
2+2
&+52.#;
5'672
&4+8'
1
2
3
4
5
6
7
9
8
11
10
20
19
22
21
15
17
16
18
14
13
12
23
/76'
24
3
[For]Middle]East]
1
2
5
8
7
9 10
4
6
3
11
Pull to flip down
the front panel.
1
Standby/on switch (Í/I) (> 14)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2
Disc tray (> 17)
3
Display
The indicator blinks when reading data from a disc, a card
or a USB device, or writing data to a card.
4
V.OFF LED (Video off LED)
≥ It is possible to set the LED to turn on/off. (> 31)
5
Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and right
6
Open or close the disc tray (> 17)
7
SD Card LED
≥ It is possible to set the LED to turn on/off. (> 31)
8
SD card slot (> 17)
9
USB port (> 17)
≥ There is another port at the back of the main unit.
Two USB ports cannot be used simultaneously.
[For[Australia[and[New[Zealand]
USB ports can be used simultaneously only with the
supplied Wireless LAN Adaptor (> 12).
10 Stop (> 18)
11 Start play (> 18)
Rear panel terminals (> 8–13)
Disc indicator
SD card indicator
USB device
indicator
e.g. [For[Australia,[New[Zealand][and[Asia]
DMP-BD300GN&GA&GC-VQT2J89_eng.book 5 ページ 2010年4月20日 火曜日 午後9時54分