Getting t o know y our machine before starting making copies function accessories network scanner (option) problem solving others digital imaging systems operating instructions (for copy & network scan functions) model no. Dp-2330/3030 before operating this equipment, please read these instructions ...
2 getting to know your machine useful office functions copy • copy up to ledger size. • capable of copying text/photos/ halftone originals. Scan/file • monochrome scanner capability when optional network scanner module (da-ns600) is installed. • scanning resolution up to 600 dpi. • a document can be...
3 getting t o know y our machine operating instructions outline function getting to know your machine before starting making copies options problem solving others ● precautions (see pages 7-13) ● quick operation chart (see pages 14 and 15) ● adding paper, replacing the toner bottle, removing a misfe...
4 getting to know your machine the following symbols/icons are used throughout this operating instructions manual. Place original(s) on the adf place original(s) on the platen (book) place original on the platen (sheet) press any hard key on the control panel or touch any button on the touch panel d...
5 getting t o know y our machine getting to know your machine table of contents useful office functions .................................................................................................................. 2 multi-tasking job table ..........................................................
6 getting to know your machine insertion/overlay ........................................................................................................................... 50 ■ overlay ........................................................................................................... 50 ■ f...
7 getting t o know y our machine getting to know your machine precautions ■ laser safety ■ caution label laser safety this unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. Caution: use of controls, adjustments or performance pro...
8 getting to know your machine precautions power and ground connection cautions ensure that the plug connection is free of dust. In a damp environment, a contaminated connector can draw a significant amount of current that can generate heat and eventually cause fire over an extended period of time. ...
9 getting t o know y our machine never touch a power cord with wet hands. Danger of electric shock exists. If the power cord is broken or insulated wires are exposed, contact your service provider for a replacement. Using a damaged cord can cause fire or electric shocks. Stop operation immediately i...
10 getting to know your machine do not place a magnet near the safety switch of the machine. A magnet can activate the machine accidentally, resulting in injuries. Do not use a highly flammable spray or solvent near the machine. It can cause fire. When copying a thick document, do not use excessive ...
11 getting t o know y our machine for your safety ■ the maximum power consumption is 1.45 kw. A properly wired (grounded), dedicated, 15a, 120v ac outlet is required. Do not use an extension cord. The power cord on this machine must be used to disconnect the main power. Please ensure that the machin...
12 getting to know your machine ventilation ■ the machine should be installed in a well-ventilated area to minimize the ozone density in the air. Warning for usa this product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in some components. Disposal of these m...
13 getting t o know y our machine ■ dept. (departmental) code when the department counter function is set up, the dept. (department) code input screen is displayed on the lcd display. A registered department code (1 to 8-digit) is required to gain access to each secured function, or the secured copy...
14 getting to know your machine operation chart if set in other function mode *30 originals (legal/ledger) face up original guides adjust to the original’s width from adf from platen load paper turn the power switch on the left side of the machine to the on position. Face down ● if the original is n...
15 getting t o know y our machine reduction/ enlargement only (see page 28) select desired settings number of copies (max. 999) adjust the manual exposure or select type of original(s) mainly text text and photo combined mainly photo receiving tray (lower) receiving tray (upper) tray/1-bin finisher ...
16 getting to know your machine operation chart ■ problem solving ● replacing the staple cartridge (when optional 1-bin finisher is installed.) ● replacing toner bottle/replacing toner waste container ● user error codes (u code) replace toner bottle replace toner waste container toner waste containe...
17 getting t o know y our machine bottle's green knob new toner bottle toner bottle bottle's green knob toner bottle (empty) new toner waste container (new) staple case new 1 2 empty 1 2 3 jammed staple staple cartridge fq-ss32 when the staple is jammed ● the following message will be displayed on t...
18 getting to know your machine operation chart ■ problem solving (continued) ● removing a misfed paper (paper entry area/1st paper tray) ● removing a misfed paper (paper transport area) ● removing a misfed paper (automatic duplex unit) ● removing a misfed paper (2nd/3rd/4th paper tray) options 3rd ...
19 getting t o know y our machine misfed paper 1 2 ∗ confirm that the latch is securely fastened. Heat roller cover right paper clearing knob 1 3 2 1 2 paper tray misfed paper latch ∗ transport cover feed cover 3 4 5 3 4 3 3 4 6 right cover 4.
20 getting to know your machine operation chart ■ problem solving (continued) ● removing a misfed paper (adf) ● removing a misfed paper (1-bin finisher) adf cover misfed paper exit unit adf tray finisher release button misfed paper 1 2 6 7 1 2 option (da-fs300).
21 getting t o know y our machine adf tray exit unit misfed paper 1 2 misfed paper remaining copies upper cover 1 misfed paper 3 2 finisher note: if the misfeed indicator(s) do not clear, open the upper cover and remove all misfed paper. When using the staple sort, shift-sort or shift-group mode, re...
22 before starting as an e nergy s tar ® partner, panasonic has determined that this product meets the e nergy s tar ® guidelines for energy efficiency. This voluntary program specifies certain energy consumption and usage standards. This product will automatically “power down” after a specified per...
23 before starting 1 2 3 4 5 6 7 10 8 9 contents copy key ● to use the unit as a photocopier. Energy saver key ● saves power while the copier is not in use. Interrupt key ● interrupts other copy or print jobs while making copies. Function key ● use when changing the paper size, initial function valu...
24 before starting touch panel display 1 2 3 4 5 9 10 22 24 23 12 15 16 20 21 17 18 28 27 26 25 29 13 14 11 8 6 7 19 note ● use only soft finger pressure to activate the touch panel display. Do not use sharp objects such as pens, fingernails etc., as this may damage the panel. ● touch panel display ...
25 before starting contents see page warning indications 14 - 17 : add toner : add paper : call service (call your service provider) : waste toner original icon — original size indication — job build and sadf/multi-size feed mode indication 38 and 39 rotate mode indication — number of copies / origi...
26 making copies basic menu ■ copying the same size originals (1:1) copy size is automatically selected. 100% if set in other function mode or if original size is not detected ■ using the adf adf upper limit indicator upper limit guide set the originals up to the upper limit indicator/guide. Adf tra...
27 making copies adjust the manual exposure or select type of original(s) mainly text text and photo combined mainly photo number of copies (max. 999) • cover • page insertion • ohp interleaving • presentation • overlay (see pages 48-51) features automatic original feeding duplex copying insertion/o...
28 making copies basic menu 100 copies 50 copies 50 copies + 100 copies 2 1 100 ■ copying with preset ratios letter ledger letter ledger or or if original size is not detected ■ proof copying or allows you to make one proof set, before proceeding to copy a large multi-set with various settings. Proo...
29 making copies original copy size size ledger legal letter-r invoice-r ledger 100 77 65 50 legal 121 100 79 61 letter-r 129 100 100 65 invoice-r 200 155 129 100 the correct ratio is automatically selected. Reduction and enlargement ratios (%) number of copies (max. 999) number of copies (max. 999)...
30 making copies basic menu ■ tandem/remote copy settings (registration 1) input the key operator id code if required. Input id code (4-digit) enter the key name (up to 15 characters). ■ tandem/remote copy settings (registration 2) if either dp-2330 or dp-3030 is installed on a network with a differ...
31 making copies scroll to 07/09 to input upper case letter(s). To input numbers and/or symbols. To move the cursor (_) to the left or right side. To erase the character before the cursor. Machine name (up to 15 characters) scroll to 02/02 button names on the keyboard input id code (4-digit) scroll ...
32 making copies basic menu ■ job queue refers to a list of jobs waiting to print, delete or change of priority (only for print job). Job 1 job 2 job 3 job 3 job 1 job 2 deleted select the job(s) ∗ you wish to delete ∗∗ ∗ you can select to delete multiple/all jobs. ∗∗ priority can be selected for pr...
33 making copies input password (4-digit) 2 times select the desired pc address number of copies note ● this completion notice is available only when connected to the network. To reset the completion notice, press the cancel button. 2 3 4 5 6 3 4 5.
34 making copies 2-sided/original copy ■ 1-sided 2-sided, 2-sided 1-sided, 2-sided 2-sided copy 1-sided 2-sided copy 2-sided 1-sided copy 2-sided 2-sided copy ● duplex notice function “2-sided print” is printed on 1-sided copy. Or reduction/ enlargement only ■ book 2-sided copy book 2-sided copy ● d...
35 making copies bind position or or or when clearing the 2-sided copy: or or number of copies from platen: when "last original?" message is displayed. Ex: 2 originals touch "no" button. Place next original on the platen. 3 press start key. 4 touch "yes" button. Or number of copies when duplex notic...
36 making copies 2-sided/original copy 1 2 3 5 6 4 6 4 5 3 1 2 3 4 1 2 4 3 1 2 ■ 2 page copy copying two facing pages or a ledger size original on two separate letter size sheets. Letter ledger ledger platen example: ledger size original ■ n in 1 copy ● 2 in 1 copy ● 2-sided copy from 4/8/12 1-sided...
37 making copies 6 copy format or number of copies ∗ n in 1 mode original direction copy layout or or or ● copy is automatically reduced. 2 in 1: 65 %, 4 in 1: 50 %, 6 in 1: 38 % (ex. Letter to letter- size) number of copies binding position cover mode and paper tray or when "last original?" mes- sa...
38 making copies 2-sided/original copy originals copies full size reduction enlargement legal legal letter-r/invoice ledger letter-r letter-r letter-r/invoice ledger ledger ledger letter/letter-r — letter letter letter/letter-r ■ multi-size feeding use this function when copying mixed ledger/letter ...
39 making copies number of copies number of copies place the next original within 5 sec. Of last ejected copy. Select sorting/finishing settings or or etc. Place the next original within 5 sec. Of last ejected copy. (30 sheets) if “another original? Yes or no” message is displayed, touch the “no” bu...
40 making copies sort/finish multiple copy sets are sorted automatically. ■ when using sort mode multiple copy sets are sorted automatically and stacked in alternate direction (rotate). (letter size only) multiple copies of individual pages are stacked in alternate direction (rotate). (letter size o...
41 making copies bin ● electronic shift-sort ● when copying with legal/ledger size, pull out the bin until it stops. Or reduction/ enlargement only number of copies sort mode or or when the optional 1-bin finisher is installed, this screen will change as follows: for da-fs300 or or 1-bin finisher (d...
42 making copies zoom/effects ■ zoom copies with variable zoom ratios from 25 % to 400 % in 1 % increments. 25% 400% or ■ auto zoom the copy zoom ratio adjusts automatically to the selected paper size. Fit to paper length or width fit to paper length and width opening the adf ■ edge creates a blank ...
43 making copies or same vertical and horizon- tal ratio 25% - 400% or or keypad different vertical and horizontal ratio 25% - 400% or or keypad or number of copies number of copies fit to paper length or width fit to paper length and width paper size (paper tray) or same vertical and horizon- tal v...
44 making copies zoom/effects ■ margin shifts image to right, left, up or down. Or ■ centering copy image can be centered automatically on selected paper. Opening the adf ■ image repeat creates continuous copy image on one sheet. Minimum original size: 20 x 20 mm opening the adf the dotted line can ...
45 making copies or number of copies or keypad margin area 5 - 99 mm if a part of the copied image is missing when using the margin mode, change the margin reduction setting to yes. (see page 58) number of copies paper size (paper tray) number of copies paper size (paper tray) number of copies 3 4 3...
46 making copies zoom/effects ■ stamping (page numbering) page numbers can be automatically stamped on each page. 1/8 -1- adf only ∗ ■ stamping (date stamp) the date can be automatically stamped on each page. Adf only ∗ ■ stamping (issue number stamping) an issue number can be automatically stamped ...
47 making copies number of copies (max. 999) ● multiple copy sets will be sorted automatically. Orientation stamping position or stamping start page from 1, 2 or 3 number of copies (max. 999) ● multiple copy sets will be sorted automatically. Orientation stamping position changing the stamp date num...
48 making copies insertion/overlay ohp2 2 1 + (2) (1) + ohp(2) ohp2 ohp(1) (2) (1) 2 1 + (2) (1) + ohp1 ohp1 ohp2 2 1 + ohp(2) ohp2 ohp(1) (2) (1) 2 1 + ohp1 ohp1 + + inser tion inser tion ■ cover adds cover page(s) to copies. Blank page copied page 2 2 1 1 + 3 2 4 3 + 4 1 2 1 original blank page or...
49 making copies paper size ∗ paper tray cover page mode cover (front) cover (front+back) blank copy number of copies (max. 999) paper size ∗ paper tray page insertion mode blank copy number of copies (max. 999) paper size ∗ paper tray ohp interleaving mode blank copy number of copies (max. 999) pap...
50 making copies insertion/overlay ■ overlay overlays a second image onto the first by using a second original. 1st-page ■ file edit up to three ∗ editing functions available in the form overlay feature. ∗ : to add a new file ∗ (hdd = max. 5 files) ∗ : to erase a registered file ∗ : to change the ti...
51 making copies density for 1st page image number of copies (max. 999) or select the overlay image to store into memory for later use. Or density for registered image register or file name erase file name edit enter the file name select a file number of copies (max. 999) from platen: if “another or...
52 making copies other features ■ job memory five copy jobs can be stored in memory (m1 to m5) for recall at a later time. To store a job in memory m1, m2, m3, m4, m5 set up the copy job to be stored. 1 2 note ● job memory mode will not be deleted even if the power switches are turned off. ● when st...
53 making copies to recall a job stored in memory m1, m2, m3, m4, m5 or number of copies (max. 999) 1 2 3 number of copies (max. 999) 3 4 note if “2: no” is selected, the machine will start copying only scanned original. 5 7 the following steps, illustrate how to make multiple copies when the sort m...
54 making copies other features ■ concurrent copying the next copy job can be reserved even if the current copy job is not completed. (requires the optional hard disk drive and image memory (see page 71) to be installed) 1st job 1st job 2nd job reserve copy 2nd job 1st job or select function ■ energ...
55 making copies scanning is completed or select function job waiting list can be confirmed with job queue. (see page 32) ■ interrupt mode this mode can interrupt other copy jobs while making copies. Or other job set other job is completed number of copies (max. 999) ∗ default m1/m2 size can be chan...
56 function ■ using function modes to change the initial modes general settings general settings for key operator copier settings copier settings for key operator printer settings printer settings for key operator fax/email settings fax/email settings for key operator scanner settings input identifi...
57 function copier settings: changing the initial copy modes ● default function of each copy mode (see pages 58 and 59) for key operator: paper size priority, original mode, contrast, job build and sadf mode, original size of manual skyshot mode, etc. (see page 64) printer settings: changing the ini...
58 function ■ general settings screen no. 00 power on default mode selects mode. Copy ● copy, fax, printer, scanner 01 manual copy quality adj sets to activate the manual density control. Off ● off, on 02 manual add toner adds toner manually. Off ● off, on 03 sort memory status indicates the sorting...
59 function 03/04 04/04 ■ copier settings screen no. 10 auto contrast adjust. Automatically adjusts the copy density for text, yes t/p. ● no, yes 11 sort priority adf selects the sort mode. Sort ● none (non-sort), sort, shift ∗ , staple ∗ , group ∗ 12 sort priority glass selects the sort mode. None ...
60 function ■ printer settings screen no. 00 number of prints sets the initial number of prints. 1 ● 1 ~ 999 01 paper size sets the paper size setting. Letter ● a3, b4, a4, b5, a5, ledger, legal, letter, invoice, 8 x 13, 8.5 x 13 02 paper tray sets the paper tray setting. Auto ● auto, bypass, tray 1...
61 function ■ general settings screen no. 00 print general settings prints the initial user settings of the common menu. Start ● stop, start 01 paper size sets the paper size of each paper tray. Consult with an ● ledger, legal, letter, letter-r, invoice, authorized service a3, b4, a4, a4r, b5, b5r, ...
62 function ■ general settings screen no. 20 date time setting sets the registered date and time. ● month, day, year, time 21 weekly timer sets the weekly on/off timer. Off ● off, on (see page 66) 22 daylight time sets the daylight time. Yes ● no, yes 23 dhcp default sets the dhcp. Yes ● no, yes 24 ...
63 function 07/09 screen no. 30 hard disk error check selects the hdd error check ∗ stop ● stop, start 31 address book group id inputs address book group id. 0 ● 0 ~ 99 32 tandem user parameter inputs the tandem user parameter. 33 community name (1) selects to change the snmp of community public nam...
64 function for key operator ■ copier settings screen no. 00 copier settings print prints the copier settings. Start ● stop, start 01 paper size priority selects paper size priority letter ● ledger, legal, letter, letter-r, invoice, a3, b4, a4, a4-r, b5, b5-r, a5, a5-r, 8 x 13, 8.5 x 13 02 original ...
65 function ■ printer settings screen no. 00 printer settings print sets the printer status printout. Start ● stop, start 01 job completion time sets the job completion time setting. 180 ● 1~ 999 sec. 02 page protection compress automatically then printout. Off ● off, on 03 error page print sets the...
66 function for example ■ changing the auto contrast setting you can select whether to automatically adjust the copying density for text and photo originals. Scroll to 03/04 ■ changing the paper size the paper trays are designed to accommodate invoice, letter, letter-r, legal and ledger size paper. ...
67 function or id code (4-digit) a b pull out the paper tray adjust the paper guides ( a / b ) change the paper size indicator id code (4-digit) scroll to 05/09 input time ex.: 1700 4 5 6 10 11 12 4 5 6 9 10 11 4 5 note: it is recommended that the paper guide ( b ) is fixed in place with screws. Con...
68 function ■ department counter the department counter feature can limit the number of copies, administer counters and identification code numbers for each department. (maximum number of departments: 300) contact your authorized service provider to enable the department counter feature. Displays th...
69 function id code (4-digit) scroll to 04/09 for maximum prints select page select department maximum number of copies (8-digit) id code (4-digit) turn the power switch on the left side of the machine off and on. For department counter select page select department clear the counter (8-digit) to “0...
70 function combined function table next selections 2-sided/orig. Copy sort/ finish zoom/ effects insertion/ overlay others 1 1 1 2 2 1 2 2 book 2 2 page n in 1 booklet multi-size feeding job build and sadf sort shift-sort rotate-sort staple-sort shift-group rotate-group non-sort zoom auto zoom edge...
71 accessories accessories components ■ the dp-2330/3030 is a digital photocopier which can produce images with great clarity. Furthermore, its copying functionality can also be greatly enhanced by the addition of the following options and supplies. We hope you find that the wide ranging capabilitie...
72 network scanner (option) ■ document scanning when panasonic document management system (pdms) is installed and configured on your pc, document(s) can be scanned from the dp-2330/3030 to pc. When using the network scanner, it is necessary first to make the panasonic communication utility software ...
73 network scanner (option) select a destination (pc) ∗ ∗ a destination will be indicated note: the panasonic communication utility software is not started on your pc, a destination is not shown on the touch panel display. Select a mode if required resolution ∗ exposure original mode 2 sided origina...
74 problem solving troubleshooting check action unit does not operate check if the power switches (main power switch on the back and power switch on the left side of the machine) are turned on and if the power cord is plugged into the ac outlet. Does the display light? Press energy saver key on the ...
75 problem solving check action marked copies clean the platen glass or sheet. Is the copier platen glass or platen sheet dirty? Cover the original with a sheet of white paper before copying or lighten the exposure setting. Is the original an ohp film or a dark original? ■ if the measures outlined a...
76 problem solving replacing the battery/set the date and time the copier has an internal battery (product no.: cr2032) which maintains the date and time. In the event the battery requires replacement, the following message will be displayed. Battery holder remove 1 screw turn the power switch on th...
77 problem solving used new battery holder install 1 screw turn the power switch on the left side of the machine to the on position. Id code (4-digit) time month, day, year, time month/day/year/time caution denotes hazards that could result in minor injury or damage to the machine. ● this product co...
78 others type: desk top platen type: fixed acceptable originals: sheets, books (max. Ledger) copying method: laser electrophotography fixing method: heat roller fixing imaging method: dry-type dual components imaging resolution: max. 600 dpi operation panel: touch panel display maximum copy size: l...
79 others adf tray capacity: letter, invoice: 50 sheets (20 lb) ledger, legal: 30 sheets (20 lb) paper size: invoice/letter/legal/ledger paper weight: 14 – 28 lb electrical requirements: supplied from the copier dimensions (w)(d)(h): 21.7 ″ (w) × 20.5 ″ (d) × 5.3 ″ (h) (552 × 520 × 135 mm) (without ...
80 others 1-bin finisher components ····························································· 71 function ··································································· 61 functions indication ················································· 24 making copies ·······························...
81 others manual exposure select buttons (lighter and darker) ································ 15, 24, 27, 73 manual skyshot mode ················································· 55 margin ········································································· 44 marked copies ···················...
82 others important information when requesting information, supplies or service always refer to the model and serial number of your machine. The model and serial number plate (main name plate) is located on the rear side of machine. For your convenience, space is provided below to record informatio...
Usa only warranty panasonic digital document company makes no warranties, guarantees or representations, expressed or implied, to customer with respect to this panasonic machine, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose. Panasonic digi...