1. DL manuals
  2. Panasonic
  3. All in One Printer
  4. DP-2330
  5. Operating Instructions Manual

Panasonic DP-2330 Operating Instructions Manual - Before Starting

Manual is about: Digital Imaging Systems

Summary of DP-2330

  • Page 1

    Getting t o know y our machine before starting making copies function accessories network scanner (option) problem solving others digital imaging systems operating instructions (for copy & network scan functions) model no. Dp-2330/3030 before operating this equipment, please read these instructions ...

  • Page 2

    2 getting to know your machine useful office functions copy • copy up to a3 size. • capable of copying text/photos/ halftone originals. Scan/file • monochrome scanner capability when optional network scanner module (da-ns600) is installed. • scanning resolution up to 600 dpi. • a document can be sav...

  • Page 3

    3 getting t o know y our machine outline of this operating instructions function getting to know your machine before starting making copies options problem solving others ● operation chart for quick operation (see pages 14, 15) ● adding paper, replacing the toner bottle, removing misfed paper and er...

  • Page 4

    4 getting to know your machine following symbol marks/icons are used in this operating instructions for your operation. Place original(s) on the adf place original(s) on the platen glass (book) place original on the platen glass (sheet) press any hard key on the control panel or touch any button on ...

  • Page 5

    5 getting t o know y our machine getting to know your machine table of contents useful office functions .................................................................................................................. 2 multi-tasking job table ..........................................................

  • Page 6

    6 getting to know your machine insertion/overlay ........................................................................................................................... 50 ■ overlay ........................................................................................................... 50 ■ f...

  • Page 7

    7 getting t o know y our machine getting to know your machine precautions ■ laser safety ■ caution label laser safety this unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. Caution: use of controls, adjustments or performance pro...

  • Page 8

    8 getting to know your machine precaution power and ground connection cautions ensure that the plug connection is free of dust. In a damp environment, a contaminated connector can draw a significant amount of current that can generate heat and eventually cause fire over an extended period of time. A...

  • Page 9

    9 getting t o know y our machine never touch a power cord with wet hands. Danger of electric shock exists. If the power cord is broken or insulated wires are exposed, contact your service provider for a replacement. Using a damaged cord can cause fire or electric shocks. Stop operation immediately i...

  • Page 10

    10 getting to know your machine do not place a magnet near the safety switch of the machine. A magnet can activate the machine accidentally, resulting in injuries. Do not use a highly flammable spray or solvent near the machine. It can cause fire. When copying a thick document, do not use excessive ...

  • Page 11

    11 getting t o know y our machine for your safety ■ the maximum power consumption is 1.5 kw. A properly wired (grounded), dedicated, 6.3 a, 220-240v ac outlet is required. Do not use an extension cord. The power cord on this machine must be used to disconnect the main power. Please ensure that the m...

  • Page 12

    12 getting to know your machine precaution caution ● this product contains a lithium battery. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Dispose of used batteries according to the instructions of your local solid waste officials. Warning fo...

  • Page 13

    13 getting t o know y our machine ■ key operator password ● the initial machine modes can be checked or changed with the function modes, however, these modes require the key operator password. For key operator : when setting up this machine, please consult with the authorized service provider, and d...

  • Page 14

    14 getting to know your machine operation chart if other function is in use ∗ 30 originals (b4/a3) face up original guides adjust to the original’s width from adf from platen glass load paper turn the power switch on (left side of the copier) face down ● if the original is not positioned properly, a...

  • Page 15

    15 getting t o know y our machine reduction/ enlargement only (see page 28) select the copy job(s) if necessary number of copies (max. 999) adjust the manual exposure or select the original(s) mainly text combined with text and photo mainly photo inner of machine (bottom) inner of machine (upper) ex...

  • Page 16

    16 getting to know your machine operation chart ■ problem solving ● replacing the staple cartridge ( when optional 1-bin finisher is installed. ) ● replacing toner bottle/replacing toner waste container ● user error codes (u code) replacing toner bottle replacing toner waste container toner waste co...

  • Page 17

    17 getting t o know y our machine toner bottle bottle green knob toner bottle bottle green knob new toner bottle new toner waste container staple case new 1 2 empty 1 2 3 jammed staple staple cartridge fq-ss32 when the staple is jammed ● following message will be displayed on the touch panel display...

  • Page 18

    18 getting to know your machine operation chart ■ problem solving (continued) ● removing misfed paper (paper entry area/1st paper tray) ● removing misfed paper (paper transport area) ● removing misfed paper (automatic duplex unit) ● removing misfed paper (2nd and 3rd/4th paper tray) options 3rd pape...

  • Page 19

    19 getting t o know y our machine ∗ check that the latch is securely fastened. Heat roller cover right paper clearing knob 1 3 2 1 2 paper tray misfed paper latch ∗ transport cover right cover feed cover 3 4 5 6 3 4 4 3 4 misfed paper paper feed guide 1 2 3.

  • Page 20

    20 getting to know your machine operation chart ■ problem solving (continued) ● removing misfed paper (finisher) finisher release button misfed paper ● removing misfed paper (adf) adf cover misfed paper exit guide adf tray 1 2 6 7 1 2 option (da-fs300).

  • Page 21

    21 getting t o know y our machine remaining copies upper cover 1 misfed paper 3 2 finisher adf tray exit guide misfed paper 1 2 misfed paper note: if the misfed indication remains, open the upper cover and remove misfed paper. When using the staple sort, shift-sort or shift-group mode, remove remain...

  • Page 22: Before Starting

    22 before starting as an e nergy s tar ® partner, panasonic has determined that this product meets the e nergy s tar ® guidelines for energy efficiency. This voluntary program specifies certain energy consumption and usage standards. This product will automatically “power down” after a specified per...

  • Page 23

    23 before starting 1 2 3 4 5 6 7 10 8 9 contents copy key ● press when using the unit as a photocopier. Energy saver key ● can save power while the copier is not in use. Interrupt key ● interrupts other copy or print jobs while making copies. Function key ● use when changing the paper size, initial ...

  • Page 24: Before Starting

    24 before starting touch panel display 1 2 3 4 5 9 10 22 24 23 12 15 16 20 21 17 18 28 27 26 25 29 13 14 11 8 6 7 19 note ● use only soft finger pressure to activate the touch panel display. Do not use sharp objects such as pens, fingernails etc., as this may damage the panel. ● touch panel display ...

  • Page 25

    25 before starting ■ touch panel display indications contents see page warning indications 14 - 17 : add toner : add paper : call service (call your service provider) : waste toner original icon — original size indication — job build and sadf/multi-size feed mode indication 38, 39 rotate mode indica...

  • Page 26: Making Copies

    26 making copies basic menu ■ copying the same size originals (1:1) copy size is automatically selected. 100% if other function is in used or if original size is not detected ■ using the adf b a set the originals up to the upper limit indicator/guide adf tray original guides adjust to the original’s...

  • Page 27

    27 making copies adjust the manual exposure or select the original(s) mainly text combined text and photo mainly photo number of copies (max. 999) • cover • page insertion • ohp interleaving • presentation • overlay (see pages 48-51) features automatic original feeding duplex copying insertion/overl...

  • Page 28: Making Copies

    28 making copies basic menu 100 copies 50 copies 50 copies + 100 copies 2 1 100 ■ copying with preset ratios a4 a3 a4 a3 or or if original size is not detected ■ proof copying or allows you to make one proof set, before proceeding to copy a large multi-set with various settings. Proof copy multi cop...

  • Page 29

    29 making copies original copy size size a3 b4 a4r a5 a3 100 87 71 50 b4 115 100 82 58 a4r 141 122 100 71 a5 200 173 141 100 the correct ratio is automatically selected. Reduction and enlargement ratios (%) number of copies (max. 999) number of copies (max. 999) if the proof copy is ok, the remainin...

  • Page 30: Making Copies

    30 making copies basic menu ■ tandem/remote copy settings (registration 1) it is necessary to input the key operator id code. Input id code (4-digit) enter the key name ∗ (up to 15 characters). ∗ by default, the key name will be up to 15 characters of the station’s name. ■ tandem/remote copy setting...

  • Page 31

    31 making copies scroll to 07/09 to input capital letter. To input number and symbol mark. To move the cursor (_) to the left or right side. To erase the character before the cursor. Machine name (up to 15 characters) scroll to 02/02 button name of keyboard input id code (4-digit) scroll to 04/04 en...

  • Page 32: Making Copies

    32 making copies basic menu ■ job queue can refer to a job list waiting for printing, delete or change of priority (only for print job). Job 1 job 2 job 3 job 3 job 1 job 2 deleted select the job(s) ∗ wish to delete ∗∗ ∗ you can select to delete multiple or all jobs. ∗∗ priority can be selected for ...

  • Page 33

    33 making copies input password (4-digit) 2 times select the desired pc address number of copies note ● this completion notice is available only when connected to the network. To reset the completion notice, press the cancel button. 2 3 4 5 6 3 4 5.

  • Page 34: Making Copies

    34 making copies 2-sided/original copy 1 2 copy 1-sided 2-sided copy 2 1 copy 2-sided 1-sided copy 2 2 copy 2-sided 2-sided copy ● duplex notice function “2-sided print” is printed on the copy. Or reduction/ enlargement only ■ book 2 copy ● duplex notice function “2-sided print” is printed on bottom...

  • Page 35

    35 making copies bind position or or or when clearing the 2-side copy: or or number of copies or number of copies original format copy format or or if necessary from platen: when "last original?" is indicated. Ex: 2 originals touch "no" button. Place next original on the platen glass. 3 press start ...

  • Page 36: Making Copies

    36 making copies 2-sided/original copy 1 2 3 6 7 4 8 5 7 5 6 3 4 1 2 8 3 4 1 2 4 3 1 2 ■ 2 page copy copying two facing pages or a a3 size original on two separate a4 size sheets. A3/a4 a3 platen glass example: a3 size original ■ n in 1 copy ● 2 in 1 copy ● 2-sided copy from 4/8/12 1-sided originals...

  • Page 37

    37 making copies copy format or number of copies number of copies binding position cover mode and paper tray or "last original?" is indicated. Ex: 2 originals touch "no" button. Place next original on the platen glass. 3 press start key. 4 touch "yes" button. 3 4 5 4 5 reduction/ enlargement only wh...

  • Page 38: Making Copies

    38 making copies 2-sided/original copy originals copies full size reduction a3 a3 a4/a4r a4 a4 a4/a4r ■ multi-size feeding use this function when copying mixed a3/a4 size originals using the adf. Original size can be detected automatically then can be copied full size or same size. Reduction/ enlarg...

  • Page 39

    39 making copies number of copies number of copies place the next original within 5 sec. Of last ejected copy. Desired sorting/finishing or or etc. Place the next original within 5 sec. Of last ejected copy. (30 sheets) if message “another original? Yes or no” is shown, touch “no” button. Number of ...

  • Page 40: Making Copies

    40 making copies sort/finish multiple copy sets are sorted automatically. ■ when using sort mode multiple copy sets are sorted automatically and stacked in alternate direction (rotate). (a4 size only) multiple copies of individual pages are stacked in alternate direction (rotate). (a4 size only) whe...

  • Page 41

    41 making copies bin ● electronic shift-sort ● when copying with b4/a3 size, pull out the bin until it stops. Or reduction/ enlargement only number of copies sort mode or or when the optional finisher is installed, this screen will be changed as follows: for da-fs300 or or 1-bin finisher (da-fs300) ...

  • Page 42: Making Copies

    42 making copies zoom/effects ■ zoom copies with variable zoom ratios from 25 % to 400 % in 1 % increments. 25% 400% or ■ auto zoom the copy zoom ratio adjusts automatically to the selected paper size. Fit to paper length or width fit to paper length and width opening the adf ■ edge creates a blank ...

  • Page 43

    43 making copies or same ratio of vertical and horizontal 25% - 400% or or keypad different ratio of vertical and horizontal 25% - 400% or or keypad or number of copies number of copies fit to paper length or width right: fit to paper length and width paper size (paper tray) or same value of vertica...

  • Page 44: Making Copies

    44 making copies zoom/effects ■ margin shifts image to right, left, up or down. Or ■ centering copy image can be centred automatically on selected paper. Opening the adf ■ image repeat create continuous copy image on one sheet. Minimum original size: 20 x 20 mm opening the adf the dotted line can be...

  • Page 45

    45 making copies or number of copies or keypad margin area 5 - 99 mm if a part of the copied image is missing when using the margin mode, change the margin reduction setting to yes. (see page 58) number of copies paper size (paper tray) number of copies paper size (paper tray) number of copies 3 4 3...

  • Page 46: Making Copies

    46 making copies zoom/effects ■ stamping (page numbering) the page number can be automatically printed on each page. 1/8 -1- adf only ∗ ■ stamping (date stamp) a selected date can be automatically printed on each page. Adf only ∗ ■ stamping (issue number stamping) the issue number can be automatical...

  • Page 47

    47 making copies number of copies (max. 999) ● multiple copy sets will be sorted automatically. Orientation stamping position stamping start page from 1, 2 or 3 number of copies (max. 999) ● multiple copy sets will be sorted automatically. Orientation stamping position stamping date if you change nu...

  • Page 48: Making Copies

    48 making copies insertion/overlay ohp2 2 1 + (2) (1) + ohp(2) ohp2 ohp(1) (2) (1) 2 1 + (2) (1) + ohp1 ohp1 ohp2 2 1 + ohp(2) ohp2 ohp(1) (2) (1) 2 1 + ohp1 ohp1 + + inser tion inser tion ■ cover adds cover page(s) to the copies. Blank paper copied paper 2 2 1 1 + 3 2 4 3 + 4 1 2 1 original blank p...

  • Page 49

    49 making copies paper size ∗ paper tray cover mode cover (front) cover (front+back) blank copy number of copies (max. 999) paper size ∗ paper tray insertion mode blank copy number of copies (max. 999) paper size ∗ paper tray interleaving mode blank copy number of copies (max. 999) paper size ∗ pape...

  • Page 50: Making Copies

    50 making copies insertion/overlay ■ overlay overlays a second image onto the first by using a second original. 1st-page ■ file edit there are three file edit available in the form overlay function. Register : to add a new file ∗ (max. 5 files) erase : to erase a registered file title edit : to chan...

  • Page 51

    51 making copies density for second image number of copies (max. 999) or select to store the overlay image into memory for later use. Or density for second image register or file name erase file name edit enter the file name select a file number of copies (max. 999) from platen glass: same procedure...

  • Page 52: Making Copies

    52 making copies other features ■ job memory five copy jobs can be stored in memory (m1 to m5) for recall at a later time. To store a job in memory m1, m2, m3, m4, m5 set up the copy job to be stored. 1 2 note: when the m5 key is used, the double exposure mode should be set to "off" in the copier se...

  • Page 53

    53 making copies to recall a job stored in memory m1, m2, m3, m4, m5 or number of copies (max. 999) 1 2 3 number of copies (max. 999) 3 4 note if “2: no” is selected, the machine will start copying only scanned original. 5 7 the following steps, illustrate how to make multiple copies when the sort m...

  • Page 54: Making Copies

    54 making copies other features ■ concurrent copying 1st job 1st job 2nd job reserve copy 2nd job 1st job or select function ■ energy saver (power save mode, sleep/shutdown mode) these modes can save power while the copier is not in use. Power save mode enter ■ skyshot mode skyshot allows copying a ...

  • Page 55

    55 making copies scanning is completed or select function job waiting list can be confirmed with job queue. (see page 32) ■ interrupt mode this mode can interrupt other copy jobs while making copies. Or other job set other job is completed number of copies (max. 999) ∗ default m1/m2 size can be chan...

  • Page 56: Function

    56 function ■ using function modes to change the initial copy modes procedure general settings general settings for key operator copier settings copier settings for key operator printer settings printer settings for key operator fax/email setting fax/email settings for key operator scanner settings ...

  • Page 57

    57 function copier settings: changing the initial copy modes ● default function of each copy mode (see pages 58, 59) for key operator: paper size priority, original mode, contrast, job build and sadf mode, original size of manual skyshot mode, etc. (see page 64) printer settings: changing the initia...

  • Page 58: Function

    58 function ■ general settings screen no. 00 power on default mode selects mode. Copy ● copy, printer, scanner*, fax*/email* 01 manual copy quality adj sets to activate the manual density control. Off ● off, on 02 manual add toner adds toner manually. Off ● off, on 03 sort memory status indicates th...

  • Page 59

    59 function ■ copier settings screen no. 10 auto contrast adjust. Automatically adjusts the copy density for text, yes t/p. ● no, yes 11 sort priority adf selects the sort mode. Sort ● none (non-sort), sort, shift*, staple*, group* 12 sort priority glass selects the sort mode. None ● none (non-sort)...

  • Page 60: Function

    60 function ■ printer settings screen no. 00 number of prints sets the initial number of prints. 1 ● 1 ~ 999 01 paper size sets the paper size setting. A4 ● a3, b4, a4, b5, a5, ledger, legal, letter, invoice, 8 x 13, 8.5 x 13 02 paper tray sets the paper tray setting. Auto ● auto, bypass, tray 1, tr...

  • Page 61

    61 function ■ general settings screen no. Modes function initial setting 01/09 02/09 03/09 04/09 note ● it is necessary to input the key operator id code before changing items on this page. 00 print general settings sets print of common menu for the user initial setting. Start ● stop, start 01 paper...

  • Page 62: Function

    62 function ■ general settings screen no. 20 date time setting sets date time registered. ● day, month, year, time 21 weekly timer sets the weekly on/off timer. Off ● off, on (set) 22 daylight time sets the daylight time. Yes ● no, yes 23 dhcp default sets the dhcp. Yes ● no, yes 24 tcp/ip address s...

  • Page 63

    63 function ■ general settings screen no. 35 device name input the device name when necessary. ∗∗ panasonic (for status monitor/ethertalk machine name) dp-2330 or dp-3030 36 device location input the device location when necessary. ∗∗ (for status monitor) 37 routing menu function selects the documen...

  • Page 64: Function

    64 function for key operator ■ copier settings screen no. 00 copier settings print print the copier settings. Start ● stop, start 01 paper size priority selects paper size priority a4 ● ledger, legal, letter, letter-r, invoice, a3, b4, a4, a4r, b5, b5r, a5, a5r, 8 x 13, 8.5 x 13 02 original mode def...

  • Page 65

    65 function ■ printer settings screen no. 00 printer settings print sets the printer status print. Start ● stop, start 01 job completion time sets the job completion time setting. 180 ● 1~ 999 sec. 02 page protection compress automatically then print out. Off ● off, on 03 error page print sets print...

  • Page 66: Function

    66 function for example ■ changing the auto contrast setting you can select whether the copying density is adjusted automatically for text and photographic originals. Scroll to 03/04 ■ changing the paper size the paper trays are designed to accommodate a5, a4, a4-r, b4/fls and a3 size paper. Paper t...

  • Page 67

    67 function or id code (4-digit) a b pull out the paper tray adjust the paper guide a / b change the paper size indicator id code (4-digit) scroll to 05/09 input time ex.: 0800 4 5 4 5 6 10 11 12 4 5 6 9 10 11 note: it is recommended that the paper guide (b) be fixed in place with screws. Consult an...

  • Page 68: Function

    68 function ■ department counter department counter can be managed, limit copies, counters and code numbers for each department. (maximum department number: 300) contact your authorised servicing dealer to enable the department counter feature. Displays the sum of all the active department counters....

  • Page 69

    69 function id code (4-digit) scroll to 04/09 for department counter select page select department clear the counter (8-digit) to “0” for maximum prints select page select department maximum number of copies (8-digit) id code (4-digit) turn off and on the power switch or 4 5 6 4 5 7 8.

  • Page 70: Function

    70 function combined function table next selections 2-sided/orig. Copy sort/ finish zoom/ effects insertion/ overlay others 1 1 1 2 2 1 2 2 book 2 2 page n in 1 booklet multi-size feeding job build and sadf sort shift-sort rotate-sort staple-sort shift-group rotate-group non-sort zoom auto zoom edge...

  • Page 71: Accessories

    71 accessories accessories components ■ the dp-2330/3030 is a digital photocopier which can produce images with great clarity. Furthermore, its copying functionality can also be greatly enhanced by the addition of the following options and supplies. We hope you find that the wide ranging capabilitie...

  • Page 72: Network Scanner (Option)

    72 network scanner (option) right-click on the icon. Select scanner configuration.... ■ document scanning when the panasonic document management system (pdms) is installed and configured on your pc, document(s) can be scanned from the dp-2330/3030 to pc. When using the network scanner, it is necessa...

  • Page 73

    73 network scanner (option) right-click on the panasonic communi- cations utility icon, and select one of the scanner reception notifications (pop up display or icon display). Note: ∗ consult your system administrator for detail of your subnet mask. Select “auto registration”. Set the pc and key nam...

  • Page 74: Problem Solving

    74 problem solving troubleshooting check action unit does not operate check if the power switches (main power switch on the back and power switch on the left side of the machine) are turned on and if the power cord is plugged into the ac outlet. Does the display light? Press energy saver key on the ...

  • Page 75

    75 problem solving check action marked copies clean the platen glass or sheet. Is the copier platen glass or platen sheet dirty? Cover the original with a sheet of white paper before copying or lighten the exposure setting. Is the original an ohp film or a dark original? ■ if the measures outlined a...

  • Page 76: Problem Solving

    76 problem solving replacing the battery/set the date and time the copier has an internal battery (product no.: cr2032) which maintains the date and time. In the event the battery requires replacement, the following message will be displayed. Battery holder remove 1 screw turn the power switch on th...

  • Page 77

    77 problem solving used new battery holder install 1 screw turn the power switch on the left side of the machine to the on position. Id code (4-digit) time month, day, year, time month/day/year/time caution denotes hazards that could result in minor injury or damage to the machine. ● this product co...

  • Page 78: Others

    78 others type: desk top platen type: fixed acceptable originals: sheets, books (max. A3) copying method: laser electrophotography fixing method: heat roller fixing imaging method: dry-type dual components imaging resolution: max. 600 dpi operation panel: touch panel display maximum copy size: a3 - ...

  • Page 79

    79 others adf tray capacity: a4, a5: 50 sheets (75 g /m 2 ) a3, b4·fls: 30 sheets (75 g /m 2 ) paper size: a5, a4, b4·fls, a3 paper weight: 50 - 110 g /m 2 electrical requirements: supplied from copier dimensions: 552 (w) × 520 (d) × 135 (h) mm (without tray) weight: 9.3 k g ■ adf (da-as200) ● speci...

  • Page 80: Others

    80 others 1 2 copy ································································· 34 2 page copy ······························································· 36 2 1 copy ································································· 34 2 2 copy ··············································...

  • Page 81

    81 others manual exposure select buttons (lighter and darker) ······································ 15, 24, 27 manual skyshot mode ················································· 55 margin ········································································· 44 marked copies ·················...

  • Page 82: Others

    82 others important information when requesting information, supplies or service always refer to the model and serial number of your machine. The model and serial number plate (main name plate) is located on the rear side of machine. For your convenience, space is provided below to record informatio...

  • Page 84

    For service, call: for customer support: panasonic communications co., ltd. Fukuoka, japan http://www.Panasonic.Co.Jp/global/ english ko0105-0 pjqmc0151za january 2005 published in japan.