Panasonic KX-FLB881E Quick Reference Manual - 1.7 Help Function (Kx-Mb771
1. Introduction and Preparation
14
Detailed operating instructions are on the CD-ROM.
Help
1.7 Help function (KX-MB771
only)
The unit contains helpful information on the following
topics which can be printed for reference purposes, as
follows:
–
“
BASIC SETTINGS”
–
“
FEATURE LIST”
–
“
DIRECTORY”
–
“
FAX RECEIVING”
–
“
COPIER”
–
“
REPORTS”
–
“
CALLER ID”
1
Press {MENU} repeatedly to display “
HELP”.
2
Press {} repeatedly to display the desired
item. i {SET}
3
Press {MENU} to exit.
Volume
1.8 Adjusting volume (KX-MB771
only)
Before adjusting volume, set the operation mode to fax
mode (page 13).
Ringer volume
While the unit is idle, press {V} or {^}.
L
If there are any documents in the document
entrance, you cannot adjust the volume. Confirm that
there are no documents in the entrance.
To turn the ringer OFF
Press {V} repeatedly to display “
RINGER OFF= OK?”.
i {SET}
L
The unit will not ring.
L
To turn the ringer back ON, press {^}.
Ringer pattern
L
You can select one of 3 ringer patterns (feature
#161).
Monitor volume
While using the monitor, press {V} or {^}.
Initial Programming
1.9 Date and time (KX-MB771
only)
1
{
MENU} i {#}{1}{0}{1} i {SET}
D:
|
01/M:01/Y:07
TIME: 00:00
2
Enter the current date/month/year/hour/minute by
selecting 2 digits for each. Press {*} repeatedly to
select “
AM” or “PM”, or 24-hour time entry.
Example: 10 August, 2007 10:15 PM (12 hour
clock format)
1. Press {1}{0} {0}{8} {0}{7} {1}{0} {1}{5}.
D:
|
10/M:08/Y:07
TIME: 10:15
2. Press {*} repeatedly to select “
PM”.
3
{
SET}
4
Press {MENU} to exit.
1.10 Your logo (KX-MB771 only)
You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
1
{
MENU} i {#}{1}{0}{2} i {SET}
LOGO=
|
2
Enter your logo, up to 30 characters using the dial
keypad. i {SET}
3
Press {MENU} to exit.
1.11 Your fax number (KX-MB771
only)
You can program your fax number so that it appears on
the top of each page sent.
1
{
MENU} i {#}{1}{0}{3} i {SET}
NO.=
|
2
Enter your fax number, up to 20 digits.
L
To enter a “
+”, press {*}.
L
To enter a space, press {#}.
L
To enter a hyphen, press {RECALL}.
L
To erase a number, press {STOP}.
3
{
SET}
4
Press {MENU} to exit.
1.12 Installing Multi-Function
Station
L
Install Multi-Function Station (CD-ROM) before
connecting the unit to a computer with USB
MB261_771E-PFQW2656ZA-QRG-en.book Page 14 Monday, June 25, 2007 3:13 PM