Panasonic KX-MB781 - B/W Laser - All-in-One Quick Reference Manual - Only)
1. Introduction and Preparation
11
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
Initial Programming
1.9 Date and time (KX-MB781
only)
1
{
MENU} i {#}{1}{0}{1} i {SET}
M:
|
01/D:01/Y:07
TIME: 12:00AM
2
Enter the current month/date/year/hour/minute by
selecting 2 digits for each.
Example: August 10, 2007 10:15 PM (12 hour
clock format)
1. Press {0}{8} {1}{0} {0}{7} {1}{0} {1}{5}.
M:
|
08/D:10/Y:07
TIME: 10:15AM
2. Press {*} repeatedly to select “
PM”.
3
{
SET}
4
Press {MENU} to exit.
1.10 Your logo (KX-MB781 only)
You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
1
{
MENU} i {#}{1}{0}{2} i {SET}
LOGO=
|
2
Enter your logo, up to 30 characters using the dial
keypad. i {SET}
3
Press {MENU} to exit.
1.11 Your fax number (KX-MB781
only)
You can program your fax number so that it appears on
the top of each page sent.
1
{
MENU} i {#}{1}{0}{3} i {SET}
NO.=
|
2
Enter your fax number, up to 20 digits.
L
To enter a “
+”, press {*}.
L
To enter a space, press {#}.
L
To enter a hyphen, press {FLASH}.
L
To erase a number, press {STOP}.
3
{
SET}
4
Press {MENU} to exit.
1.12 Configuring the unit to
access the LAN (KX-MB781 only)
You can print documents, scan documents, receive
faxes or send faxes using a computer on the LAN. To
enable these features, you need to set the IP address,
subnet mask, and default gateway for the unit.
Important:
L
Consult your network administrator when setting
the IP address, subnet mask, and default
gateway.
1.12.1 Setting up automatically with a
DHCP server
Your situation:
–
When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
1
After connecting the LAN cable to the unit and the
computer, connect the power cord.
L
The IP address, subnet mask, and default
gateway will be set automatically.
2
Install Multi-Function Station on the computer that
you want to use it with.
1.13 Installing Multi-Function
Station
L
Install Multi-Function Station (CD-ROM) before
connecting the unit to a computer with USB
cable. If the unit is connected to a computer with
USB cable before installing Multi-Function
Station, the [Found New Hardware Wizard]
dialog box will appear. Click [Cancel] to close it.
L
Software features and appearance are subject to
change without notice.
Warning:
L
To assure continued emission limit compliance;
–
use only shielded USB cable.
–
use only shielded LAN cable (category 5 straight
cable) (KX-MB781 only).
1
Start Windows
®
and exit all other applications.
L
For Windows 2000, Windows XP and Windows
Vista™ operating system users, you must be
logged in as an administrator in order to install
Multi-Function Station.
2
Insert the included CD-ROM into your CD-ROM
drive.
3
[
Easy installation]
L
The installation will start.
4
When the setup program starts, follow the on-screen
instructions.
5
The [Connect Type] dialog box appears.
For USB connection:
1. [Connect directly with a USB cable.] i [Next]
L
The [Connect Device] dialog box will appear.
MB271-781-PFQW2640ZA-QRG-en.book Page 11 Tuesday, May 22, 2007 12:31 PM