© panasonic system networks co., ltd. 2012 unauthorized copying and distribution is a violation of law. Order no. Km41201527ce f13 telephone equipment model no. Kx-tg4753b kx-tga470b kx-tga405b digital cordless answering system b: black version (for u.S.A.) (handset) kx-tga470b (charger unit) model ...
2 kx-tg4753b/kx-tg470b/kx-tga405b warning this service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a produ...
3 kx-tg4753b/kx-tg470b/kx-tga405b table of contents page page 1 safety precautions----------------------------------------------- 4 1.1. For service technicians --------------------------------- 4 2 warning -------------------------------------------------------------- 4 2.1. Battery caution--------...
4 kx-tg4753b/kx-tg470b/kx-tga405b 1 safety precautions 1.1. For service technicians • repair service shall be provided in accordance with repair technology information such as service manual so as to prevent fires, injury or electric shock, which can be caused by improper repair work. 1. When repair...
5 kx-tg4753b/kx-tg470b/kx-tga405b 2.2.1. Suggested pbf solder there are several types of pbf solder available commercially. While this product is manufactured using tin, silver, and copper (sn+ag+cu), you can also use tin and copper (sn+cu), or tin, zinc, and bismuth (sn+zn+bi). Please check the man...
6 kx-tg4753b/kx-tg470b/kx-tga405b 3 specifications note: • design and specifications are subject to change without notice. Note for service: • operation range: up to 300 m outdoors, up to 50 m indoors, depending on the condition. • analog telephone connection: telephone line • optional headset: kx-t...
7 kx-tg4753b/kx-tg470b/kx-tga405b 4 technical descriptions 4.1. Us-dect description the frequency range of 1.92 ghz-1.93 ghz is used. Transmitting and receiving carrier between base unit and handset is same frequency. Refer to frequency table (p.66). 4.1.1. Tdd frame format 4.1.2. Tdma system this s...
8 kx-tg4753b/kx-tg470b/kx-tga405b 4.1.3. Signal flowchart in the radio parts reception base unit: a voice signal from tel line is encoded to digital data and converted into a 1.9ghz modulated radio signal by bbic(ic501). The rf signal, after which is amplified in bbic, is fed to selected antenna. Ha...
9 kx-tg4753b/kx-tg470b/kx-tga405b 4.2. Block diagram (base unit_main) operational p.C. Board d101 charge_contac t + - sp x501 13.824 mhz mic +- ant 2 ant 1 tel jack l1t l1r dcp dcm dc jack rly side tone circuit q161 q141 bell detect hook bell q111 lin lout rf_part hsmip hsmin ic501 bbic inuse detect...
10 kx-tg4753b/kx-tg470b/kx-tga405b 4.3. Block diagram (base unit_rf part) kx-tg4753 block diagram (base unit_rf part) da801 ant2 ant1 txon rxon rxp rxn ant2 ant1 txp txn.
11 kx-tg4753b/kx-tg470b/kx-tga405b 4.4. Circuit operation (base unit) general description: (bbic, flash memory, eerrom) is a digital speech/signal processing system that implements all the functions of speech compression, record and playback, and memory management required in a digital telephone ans...
12 kx-tg4753b/kx-tg470b/kx-tga405b 4.4.4. Power supply circuit/reset circuit the power supply voltage from ac adaptor is converted to vbat (3.0v) in ic302. And +3.0v for peripherals and analog part is insulated from vbat by doubler of bbic. Circuit operation: 5.5v vbat rstn(reset) pin 54 vbat pin 10...
13 kx-tg4753b/kx-tg470b/kx-tga405b 4.4.4.1. Charge circuit the voltage from the ac adaptor is supplied to the charge circuits. D362 r372 r371 d361 charge+ f301 dcp + charge- ( ) c306 +5.5v dcm.
14 kx-tg4753b/kx-tg470b/kx-tga405b 4.4.5. Telephone line interface telephone line interface circuit: function • bell signal detection • on/off hook and pulse dial circuit • side tone circuit bell signal detection and off hook circuit: in the idle mode, q141 is open to cut the dc loop current and dec...
15 kx-tg4753b/kx-tg470b/kx-tga405b 4.4.6. Parallel connection detect circuit/auto disconnect circuit function: in order to disable call waiting and stutter tone functions when using telephones connected in parallel, it is necessary to have a circuit that judges whether a telephone connected in paral...
16 kx-tg4753b/kx-tg470b/kx-tga405b 4.4.7. Calling line identification (caller id)/call waiting caller id function: caller id the caller id is a chargeable id which the user of a telephone circuit obtains by entering a contract with the telephone company to utilize a caller id service. For this reaso...
17 kx-tg4753b/kx-tg470b/kx-tga405b call waiting caller id calling identity delivery on call waiting (cidcw) is a class service that allows a customer, while off-hook on an existing call, to receive information about a calling party on a waited call. The transmission of the calling information takes ...
18 kx-tg4753b/kx-tg470b/kx-tga405b 4.5. Block diagram (handset) ic1 ic3 mip min hsspoutp lout bell_led hsmip headset_det spoutp spoutn ckm//stm ckm/stm bbic reset chg_ctl chg_det wp, clk, data keystorobe_a~e keyin_1~5 charge q3 mic receiver headset jack cn431 led monitor sp lcd charge pump ic4 keys ...
19 kx-tg4753b/kx-tg470b/kx-tga405b 4.6. Block diagram (handset_rf part) kx-tga470 block diagram (handset_rf part) da801 txon rxon rxp rxn ant txp txn.
20 kx-tg4753b/kx-tg470b/kx-tga405b 4.7. Circuit operation (handset) 4.7.1. Outline handset consists of the following ics as shown in block diagram (handset) (p.18). • dect bbic (base band ic): ic1 - all data signals (forming/analyzing ack or cmd signal) - all interfaces (ex: key, detector circuit, c...
21 kx-tg4753b/kx-tg470b/kx-tga405b 4.7.3. Charge circuit circuit operation: when charging the handset on the base unit, the charge current is as follows; dc+(6.5 v) → f301 → r371 → r372 →charge+(base) → charge+(handset) → q4 → d7→ f1 → battery+... Battery... Battery- → r45 → gnd → charge-(handset)→ ...
22 kx-tg4753b/kx-tg470b/kx-tga405b 4.9. Block diagram (range extender_main) 4.10. Block diagram (range extender_rf part) kx-tga405 block diagram (range extender_main) ant2 ant1 sw1 rf_part ic501 bbic vbat_apu vbat vcc_fe vcc_if vcc_vco scl, sda wp status red status green ant/id red ant/id green ic61...
23 kx-tg4753b/kx-tg470b/kx-tga405b 4.11. Circuit operation (range extender) (bbic, eeprom) is a digital speech/signal pro cessing system. The bbic system is fully controlled by a host processor. The host processor provides activation and control of all that functions as follows. 4.11.1. Bbic (base b...
24 kx-tg4753b/kx-tg470b/kx-tga405b 4.11.3. Power supply circuit the power supply voltage from ac adaptor is converted to vbat (3.0 v) in ic302. Vbat is used for bbic and all peripherals. Circuit operation: 6.5v vbat rstn(reset) pin 54 vbat pin 10 pin 57 pin 9 ic501 ic302 ic611 bbic vddc (1.2v) ac ad...
25 kx-tg4753b/kx-tg470b/kx-tga405b 4.12. Signal route note: : inside of handset handset mic - r73/74 - c11/13 - ra4 - ic1(22/23) - - ant. --- ---ant. - - ic501(46/47 - 28) - c184 - q161 - q141 - d101 - l101/[l102 - p101] - t/r(tel line) t/r(tel line) - l101/[p101 - l102] - d101 - q141 - r165 - r177 ...
26 kx-tg4753b/kx-tg470b/kx-tga405b rf part signal route range extender signal route signal route in 㸢㩷 route 㸢㩷 out handset rf [ tx_route ] handset rf [ rx_route ] base unit rf [ tx_route ] base unit rf [ rx_route ] ic1(44/45) - l809 - c812 - da801 - c803 - c801 - ant ant - c801 - c803 - da801 - c82...
27 kx-tg4753b/kx-tg470b/kx-tga405b 5 location of controls and components refer to the operating instructions. Note: you can download and refer to the operating instructions (instruction book) on tsn server. 6 installation instructions refer to the operating instructions. Note: you can download and r...
28 kx-tg4753b/kx-tg470b/kx-tga405b 8 test mode 8.1. Engineering mode 8.1.1. Base unit important: make sure the address on lcd is correct when entering new data. Otherwise, you may ruin the unit. 1). Press . 2). Select "initial setting" using or then press or {>} . H/s key operation h/s lcd {^} {v} 3...
29 kx-tg4753b/kx-tg470b/kx-tga405b frequently used items (base unit) ex.) note: (*1) when you enter the address or new data, please refer to the table below. Items address default data new data remarks frequency 00 07 / 00 08 00/01 - - use these items in a read-only mode to confirm the contents. Car...
30 kx-tg4753b/kx-tg470b/kx-tga405b 8.1.2. Handset important: make sure the address on lcd is correct when entering new data. Otherwise, you may ruin the unit. H/s key operation h/s lcd 1). Press . 2). Select "initial setting" using or then press or {>} . {^} {v} 3). Enter "7", "2", "6", "2", "7", "6...
31 kx-tg4753b/kx-tg470b/kx-tga405b frequently used items (handset) ex.) note: (*1) when you enter the address or new data, please refer to the table below. (*2) use these items in a read-only mode to confirm the contents. Careless rewriting may cause serious damage to the handset. Items address defa...
32 kx-tg4753b/kx-tg470b/kx-tga405b 9 service mode 9.1. How to clear user setting (handset only) handset press , , , simultaneously until a beep sound is heard. Then single handset is initialized. (the contents of user setting are reset to factory default) *usage time is not cleared..
33 kx-tg4753b/kx-tg470b/kx-tga405b 10 troubleshooting guide 10.1. Troubleshooting flowchart 10.1.1. Flow chart (without range extender) cross reference: check power (p.34) check playback (p.38) check record (p.35) check battery charge (p.38) check link (p.39) check the rf part (p.42) check handset t...
34 kx-tg4753b/kx-tg470b/kx-tga405b 10.1.2. Flow chart (range extender) cross reference: check power (p.34) check link (p.41) check the rf part (p.42) 10.1.3. Check power 10.1.3.1. Base unit and range extender cross reference: power supply circuit/reset circuit (p.12) for base unit. Power supply circ...
35 kx-tg4753b/kx-tg470b/kx-tga405b 10.1.3.2. Handset cross reference: power supply circuit/reset circuit (p.20) 10.1.4. Check record 10.1.4.1. Base unit not record incoming message cross reference: signal route (p.25) telephone line interface (p.14) parallel connection detect circuit/auto disconnect...
36 kx-tg4753b/kx-tg470b/kx-tga405b a) auto disconnect activation time: some telephone company lines (fiber or cable) on hook and off hook voltages are lower than conventional lines, which may cause a malfunction of auto disconnect detection. To solve this problem, try changing the auto disconnect ac...
37 kx-tg4753b/kx-tg470b/kx-tga405b b) vox level: it makes easier to detect a small voice (caller) by raising the sensitivity of vox level. Therefore, the recording of tam is not turned off during a detection. 1) ~ 2) are same as (a). 3) press "5","1","1". 4) then enter the below last digit; 5) back ...
38 kx-tg4753b/kx-tg470b/kx-tga405b 10.1.5. Check playback 10.1.5.1. Base unit cross reference: power supply circuit/reset circuit (p.12) note: flash memory is ic601. Bbic is ic1. (*1) refer to circuit board (base unit_main) (p.85). 10.1.6. Check battery charge 10.1.6.1. Base unit cross reference: ch...
39 kx-tg4753b/kx-tg470b/kx-tga405b 10.1.7. Check link 10.1.7.1. Base unit cross reference: power supply circuit/reset circuit (p.12) check the rf part (p.42) note: *1 how to adjust +3.0v: execute the command "vda" refer to things to do after replacing ic or x'tal (p.64) for base unit. *2 how to adju...
40 kx-tg4753b/kx-tg470b/kx-tga405b 10.1.7.2. Handset cross reference: power supply circuit/reset circuit (p.20) check the rf part (p.42) note: *1 how to adjust +3.0v: execute the command "vda" refer to things to do after replacing ic or x'tal (p.65) for handset. *2 how to adjust the frequency of x1:...
41 kx-tg4753b/kx-tg470b/kx-tga405b 10.1.7.3. Range extender cross reference: power supply circuit (p.24) check the rf part (p.42) note: *1 how to adjust +3.0v: execute the command "vda" refer to things to do after replacing ic or x'tal (p.64) for range extender. *2 how to adjust the frequency of x50...
42 kx-tg4753b/kx-tg470b/kx-tga405b 10.1.8. Check the rf part 10.1.8.1. Finding out the defective part prepare regular hs (*1) and regular bu (*2) and regular re (*3). Handset is power on with “1“, “6“and “#“. Note: (*1) hs: handset (*2) bu: base unit (*3) re: range extender start (other checkings) r...
43 kx-tg4753b/kx-tg470b/kx-tga405b 10.1.8.2. Rf check flowchart each item (1 ~ 5) of rf check flowchart corresponds to check table for rf part (p.44). Please refer to the each item. Note: (*1) refer to check link (p.39). Start link confirmation normal 1 control signal confirmation x'tal frequency co...
44 kx-tg4753b/kx-tg470b/kx-tga405b 10.1.8.3. Check table for rf part note: (*1) refer to commands (handset) (p.59) (*2) refer to commands (base unit) (p.59) (*3) adjustment standard (base unit) (p.60) (*4) adjustment standard (handset) (p.63) 10.1.8.4. Check table for range extender rf part note: (*...
45 kx-tg4753b/kx-tg470b/kx-tga405b 10.1.8.5. Test range check circuit block which range is defective can be found by the following check. Chart1: setting of tx power and rx sensitivity in range confirmation tx test, rx test note: (*1) refer to commands (base unit) (p.59). 10.1.8.6. Test range check ...
46 kx-tg4753b/kx-tg470b/kx-tga405b 10.1.9. Registering a handset to the base unit 10.1.10. Deregistering a handset 10.1.11. Deregistering a range extender {menu} i # 1 3 0 l l l l the supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit...
47 kx-tg4753b/kx-tg470b/kx-tga405b 10.1.12. Check handset transmission cross reference: signal route (p.25) 10.1.13. Check handset reception cross reference: signal route (p.25) note: when checking the rf part, refer to check the rf part (p.42). 10.1.14. Check caller id cross reference: telephone li...
48 kx-tg4753b/kx-tg470b/kx-tga405b 11 disassembly and assembly instructions 11.1. Disassembly instructions 11.1.1. Base unit Ԙ remove the 4 screws to remove the cabinet cover. ԙ remove the solders. Ԛ remove the screw and pararell wire to remove the main p.C. Board. Solders ԙ cabinet cover Ԙ 4 screws...
49 kx-tg4753b/kx-tg470b/kx-tga405b ԛ remove the 2 screws to remove the jack holder. Ԝ remove the 2 screws to remove the operational p.C.B board. Jack holder Ԝ 2 screws operational p.C.B board ԛ 2 screws.
50 kx-tg4753b/kx-tg470b/kx-tga405b 11.1.2. Handset Ԙ remove the 2 screws. ԙ Ԛ likewise, open the other side of the cabinet. ԛ remove the cabinet cover by pushing it upward. Ԝ remove the solders and tape. Remove the 2 screws to remove the 2 charge terminals. ԝ Ԟ remove the screw to remove the main p....
51 kx-tg4753b/kx-tg470b/kx-tga405b 11.1.3. Charger unit Ԙ remove the screw to remove the cabinet cover. ԙ remove the solders to remove the 2 charge terminals. Ԙ screw ԙ solders main p.C. Board 2 charge terminals.
52 kx-tg4753b/kx-tg470b/kx-tga405b 11.1.4. Range extender 2 screws solders main p.C. Board cabinet cover remove the 2 screws to remove the cabinet cover. Remove the solders to remove the main p.C. Board..
53 kx-tg4753b/kx-tg470b/kx-tga405b 11.2. How to replace the base unit lcd Ԙ ԙ fit the heatseal of a new lcd. Heatweld with the tip of the soldering iron about 5 to 8 seconds (in case of 60w soldering iron). Operational p.C.B. 0.2mm 0.2mm if interval tolerance between center lines is less than 0.2 mm...
54 kx-tg4753b/kx-tg470b/kx-tga405b Ԛ attach the lcd and fix by hook a (two points). A.
55 kx-tg4753b/kx-tg470b/kx-tga405b 11.3. How to replace the handset lcd note: the illustrations are simplified in this page. They may differ from the actual product. Peel off the ffc (flexible flat cable) from the lcd, in the direction of the arrow. Take care to ensure that the foil on the p.C. Boar...
56 kx-tg4753b/kx-tg470b/kx-tga405b 12 measurements and adjustments this chapter explains the measuring equipment, the jig connection, and the pc setting method necessary for the measurement in troubleshooting guide (p.33) 12.1. Equipment required • digital multi-meter (dmm): it must be able to measu...
57 kx-tg4753b/kx-tg470b/kx-tga405b 12.2.2. Connections (handset) connect the dc power or battery to batt+ and batt-. Connect the jig cable gnd (black) to gnd. Connect the jig cable utx (yellow) to utx and urx (red) to urx. Note: *: com port names may vary depending on what your pc calls it. 12.2.3. ...
58 kx-tg4753b/kx-tg470b/kx-tga405b 12.2.4. How to install batch file into p.C. Note: • “*****” varies depending on the country or models. 1. Insert the batch file cd-rom into cd-rom drive and copy pnzztg**** folder to your pc (example: d drive). 2. Open an ms-dos mode window. 3. At the dos prompt, t...
59 kx-tg4753b/kx-tg470b/kx-tga405b 12.2.5. Commands (base unit) see the table below for frequently used commands. 12.2.6. Commands (handset) see the table below for frequently used commands. Command name function example rdeeprom read the data of eeprom type “rdeeprom 00 00 ff”, and the data from ad...
60 kx-tg4753b/kx-tg470b/kx-tga405b 12.3. Adjustment standard (base unit) when connecting the simulator equipment for checking, please refer to below. 12.3.1. Bottom view note: (*1) is referred to no.2 of check check table for rf part (p.44) (*2) is referred to power supply circuit/reset circuit (p.1...
61 kx-tg4753b/kx-tg470b/kx-tga405b 12.4. Adjustment standard (charger unit) when connecting the simulator equipment for checking, please refer to below. 12.4.1. Bottom view d1 r1 f1 r2 a pnlb2081z -ig pbf charge- charge+ 12 /2 w digital volt meter dc power dc 5.5 v (gnd).
62 kx-tg4753b/kx-tg470b/kx-tga405b 12.5. Adjustment standard (range extender) when connecting the simulator equipment for checking, please refer to below. 12.5.1. Bottom view note: (*1) is referred to power supply circuit (p.24) a pnlb1754z pbf c530 c525 c521 c524 c510 c514 c512 c301 ant1 cl1 ant2 c...
63 kx-tg4753b/kx-tg470b/kx-tga405b 12.6. Adjustment standard (handset) when connecting the simulator equipment for checking, please refer to below. 12.6.1. Component view note: (*1) is referred to no.2 of check check table for rf part (p.44) (*2) is referred to power supply circuit/reset circuit (p....
64 kx-tg4753b/kx-tg470b/kx-tga405b 12.7. Things to do after replacing ic or x'tal if repairing or replacing eeprom and x'tal, it is necessary to download the required data such as programming data or adjustment data, etc in memory. The set doesn't operate if it is not executed. 12.7.1. How to downlo...
65 kx-tg4753b/kx-tg470b/kx-tga405b 12.7.1.3. Handset first, operate the pc setting according to the setting method of jig (p.56). Then download the appropriate data according to the following procedures. Note: (*2) xxx_yyy: revision number “xxx” and “yyy” vary depending on the country version. You c...
66 kx-tg4753b/kx-tg470b/kx-tga405b 12.8. Frequency table ch. (hex) tx/rx frequency (mhz) channel 0 00 1928.448 channel 1 01 1926.720 channel 2 02 1924.992 channel 3 03 1923.264 channel 4 04 1921.536.
67 kx-tg4753b/kx-tg470b/kx-tga405b 13 miscellaneous 13.1. How to replace the llp (leadless leadframe package) ic note: this description is only applied on the model with shield case. 13.1.1. Preparation • pbf (: pb free) solder • soldering iron tip temperature of 700 °f ± 20 °f (370 °c ± 10 °c) note...
68 kx-tg4753b/kx-tg470b/kx-tga405b 13.1.4. How to install the ic 1. Place the solder a little on the land where the radiation gnd pad on ic bottom is to be attached. 2. Place the solder a little on the land where ic pins are to be attached, then place the ic. Note: • when placing the ic, the positio...
69 kx-tg4753b/kx-tg470b/kx-tga405b 13.2. How to replace the flat package ic even if you do not have the special tools (for example, a spot heater) to remove the flat ic, with some solder (large amount), a soldering iron and a cutter knife, you can easily remove the ics that have more than 100 pins. ...
70 kx-tg4753b/kx-tg470b/kx-tga405b 13.2.3. How to install the ic 1. Temporarily fix the flat package ic, soldering the two marked pins. *check the accuracy of the ic setting with the corresponding soldering foil. 2. Apply flux to all pins of the flat package ic. 3. Solder the pins, sliding the solde...
71 kx-tg4753b/kx-tg470b/kx-tga405b 13.3. Terminal guide of the ics, transistors and diodes 13.3.1. Base unit 13.3.2. Handset 13.3.3. Charger b c e c b e 2sc6054jsl b1abdm000001 1 4 8 5 pnwi1tg4731h pnwi2tg4731h c2hbcy000080 dsc7003s0l cathode anode b0eckm000008 pqvdmd5s cathode anode b0ddcd000001 3 ...
72 kx-tg4753b/kx-tg470b/kx-tga405b 13.3.4. Range extender 1 4 8 5 pnwitg405br 1 3 5 4 b1gfcfen0011 cathode anode b0ddcd000001 3 2 1 4 c0cbayg00016 1 88 67 23 44 22 66 45 (reverse view) c2hbcy000046 φ φ cathode anode lnj308g8jra lnj237w82ra cathode anode.
73 kx-tg4753b/kx-tg470b/kx-tga405b 14 schematic diagram 14.1. For schematic diagram 14.1.1. Base unit (schematic diagram (base unit_main)) notes: 1. Dc voltage measurements are taken with voltmeter from the negative voltage line. 2. The schematic diagrams may be modified at any time with the develop...
74 kx-tg4753b/kx-tg470b/kx-tga405b 14.2. Schematic diagram (base unit_main) nc: no components *ic501 jtag_tdo urx jtag_tms utx jtag_tdi jtag_tdo jtag_tck jtag_rtck jtag_tdi jtag_tms jtag_rtck jtag_tck bell charge_det lcd_blt msg_led ans_led sp_led lcd_rst keys_e keys_c keyin1 keyin2 keyin3 keys_d ke...
75 kx-tg4753b/kx-tg470b/kx-tga405b kx-tg4753 schematic diagram (base unit_main) nc: no components urx utx eep_wp spi_cs eep_sda spi_clk eep_scl lcd_cs spi_do spi_di bell hook lcd_rst sp_led charge_det hook spi2_clk spi2_do lcd_cd keys_a keys_b spi_clk spi_do spi_di eep_wp eep_scl eep_sda keyin3 keyi...
76 kx-tg4753b/kx-tg470b/kx-tga405b 14.3. Schematic diagram (base unit_operation) pcb carbon_test ct1 ct2 ans 1 2 bt_hs_led(g) cell2_led(g) lcd_rst nc1 cell2_led(r) led907 vled stop 1 2 keyin2 rpt 1 2 msg1 1 2 keyin1 msg3 1 2 keyin3 lcd_scl gnd lcd_sid nc2 erase 1 2 up 1 2 skip 1 2 *led914 nc a k lcd...
77 kx-tg4753b/kx-tg470b/kx-tga405b memo.
78 kx-tg4753b/kx-tg470b/kx-tga405b 14.4. Schematic diagram (handset_main) nc: no components (1) (2) (3) (4) (5) (7) (6) (9) (10) (11) (12) (8) stb_d kin_4 chg_det chg_ctrl chg_cur stb_e stb_c key_le d eep_wp eep_wp eep_scl eep_sda eep_wp stb_d lcd_reset lcd_sid lcd_scl lcd_cs lcd_cd kin_1 kin_2 kin_...
79 kx-tg4753b/kx-tg470b/kx-tga405b kx-tga470 schematic diagram (handset_main) nc: no components (1) (2) (3) (4) (5) (7) (6) (9) (10) (11) (12) (8) rx_rf tx_rf handset rx handset tx sp-phone tx sp-phone rx headset_det c71 nc c28 nc c97 d10p c96 d10p d3 nc d4 nc c12 10u c42 k1000p gnd gnd r73 33 r74 3...
80 kx-tg4753b/kx-tg470b/kx-tga405b 14.5. Schematic diagram (handset_led) led kx-tga470 schematic diagram (handset_led).
81 kx-tg4753b/kx-tg470b/kx-tga405b 14.6. Schematic diagram (charger unit) j1 2 1 g a k tp1 tp2 f1 r1 1 (0.5w) r2 d1 1 (0.5w) schematic diagram (charger unit) !.
82 kx-tg4753b/kx-tg470b/kx-tga405b 14.7. Schematic diagram (range extender) nc: no components jtag_tdo jtag_tms jtag_tck jtag_tdi jtag_tdo jtag_tdi jtag_tck jtag_tms jtag_rtck jtag_rtck r612 10k ra501 33 1 2 3 4 5 6 7 8 ra502 10k 1 2 3 4 6 5 7 8 c516 0.1u c515 k1u c517 0.1u c518 0.1u +3.0v c611 0.1u...
83 kx-tg4753b/kx-tg470b/kx-tga405b kx-tga405 schematic diagram (range extender) nc: no components +6.5v c519 0.1u vbat vbat sw1 1 2 ra504 68 1 2 3 4 c512 0.1u c514 0.1u c510 k1u c513 k2.2u vddc c506 nc c501 0.1u +3.0v c520 0.1u c508 10p r509 nc vbat +3.0v vddc vddc f301 3.0a dcp dcm c301 nc ic302 4 ...
84 kx-tg4753b/kx-tg470b/kx-tga405b memo.
85 kx-tg4753b/kx-tg470b/kx-tga405b 15 printed circuit board 15.1. Circuit board (base unit_main) 15.1.1. Component view ant2 wbx02 wbx01 ant1 brn tel ylw gry pur org org sp dc blu blu chg 1 kx-tg4753 circuit board (base unit_main (component view)) a kx-tg474x/473xh tg474x pnlb2013z pbf -pa c168 c161...
86 kx-tg4753b/kx-tg470b/kx-tga405b 15.1.2. Bottom view kx-tg4753 circuit board (base unit_main (bottom view)) a pbf gry pur org sp charge+ chg charge- dc dcp blu org blu brn tel ylw kx-tg474x/473xh pnlb2013z -pa c476 c521 c133 c611 c151 c186 c185 c662 c664 l664 l665 c665 c663 c669 c511 ra452 c479 c1...
87 kx-tg4753b/kx-tg470b/kx-tga405b 15.2. Circuit board (base unit_operation) rpt msg1 msg3 msg2 msg4 stop erase ans locat/int down skip up led915 kx-tg4753 circuit board (base unit_operation (component view)) tg773xh tg473xh a pnlb2049z pbf -ig led916 led911 led912 led913 led914 led908 led906 led905...
88 kx-tg4753b/kx-tg470b/kx-tga405b memo.
89 kx-tg4753b/kx-tg470b/kx-tga405b 15.3. Circuit board (handset_main) 15.3.1. Component view r3 c5 chg+ chg (+) chg (-) bat+ c28 c6 c15 l10 c83 c32 l7 l8 l1 spm c72 blue orange mic+ mic- spp r80 c87 r45 bat- a chg- c10 c82 cn4 c84 l75 c85 d13 d14 c73 l4 l5 c37 q6 r27 r28 c12 ra1 ra3 ra2 sp-phone chg...
90 kx-tg4753b/kx-tg470b/kx-tga405b 15.3.2. Bottom view v ol_up cn3_c v ol_d w led7 led1 talk 1 4 7 8 9 0 a # 5 6 2 3 sp flash off led3 led5 led6 mic led21 led20 led4 led2 led9 led9 soft_a soft_b up down left right soft_c pnlb2012z -pa kx-tga470 circuit board (handset_main (bottom view)).
91 kx-tg4753b/kx-tg470b/kx-tga405b 15.4. Circuit board (handset_led) a kx-tga470 circuit board (handset_led (component view)) pnlb1964z pbf -ig.
92 kx-tg4753b/kx-tg470b/kx-tga405b 15.5. Circuit board (charger unit) 15.5.1. Component view 15.5.2. Bottom view j1 circuit board (charger unit (component view)) pnlb2081z -ig a circuit board (charger unit (bottom view)) pnlb2081z -ig d1 r1 f1 r2 a pbf.
93 kx-tg4753b/kx-tg470b/kx-tga405b 15.6. Circuit board (range extender) 15.6.1. Component view c893 c302 c308 c306 sw1 c342 c343 c661 c825 c891 c826 c810 c806 c863 c827 c892 c517 c501 c502 c504 cn601 za1 c523 c822 c894 c895 c820 c813 c811 r322 r661 led654 led653 led652 led651 r321 l301 ic501 d a801 ...
94 kx-tg4753b/kx-tg470b/kx-tga405b 15.6.2. Bottom view kx-tga405 circuit board (range extender (bottom view)) a pnlb1754z pbf c530 c525 c521 c524 c510 c514 c512 c301 ant1 cl1 ant2 cl2 rtck r654 r653 r652 r651 rstn r371 r304 jj302 ic301 stm/ckm/p15 tck tdo tdi tms ra502 r612 gpio26 ra504 dcdc_out dcp...
95 kx-tg4753b/kx-tg470b/kx-tga405b 16 exploded view and replacement parts list 16.1. Cabinet and electrical parts (base unit) note: (*1) this cable is fixed by welding. Refer to how to replace the base unit lcd (p.53) e2 17 18 15 14 pcb1 pcb2 9 12 e1 (*1) e3 8 10 11 4 5 2 3 6 a 13 a a a 16 1 7 12 re...
96 kx-tg4753b/kx-tg470b/kx-tga405b 16.2. Cabinet and electrical parts (handset) note: (*1) this cable is fixed by welding. Refer to how to replace the handset lcd (p.55). (*2) the rechargeable ni-mh battery hhr-4dpa is available through sales route of panasonic. (*3) attach the spacer (no. 121) to t...
97 kx-tg4753b/kx-tg470b/kx-tga405b 16.3. Cabinet and electrical parts (charger unit) b 200 200-1 200-3 201 200-4 200-2 pcb200 ref.No. φ 2 ×8 mm b figure.
98 kx-tg4753b/kx-tg470b/kx-tga405b 16.4. Cabinet and electrical parts (range extender) ref.No. Figure a 2.6 x 8mm 300-1 300-4 300-3 300-5 300-2 pcb1 a 301 300
99 kx-tg4753b/kx-tg470b/kx-tga405b 16.5. Accessories and packing materials 16.5.1. Kx-tg4753b a4, a5, a6 a8 p1 a3 p2 p2 p3 (*1) p2 p3 (*1) a2 note: (*1) these pads are pieces of ref no.P1 (gift box). A1 a7.
100 kx-tg4753b/kx-tg470b/kx-tga405b 16.5.2. Kx-tga470b note: (*1) this pad is a piece of ref no.P101 (gift box). A102 p101 a103 p102 (*1) a101.
101 kx-tg4753b/kx-tg470b/kx-tga405b 16.6. Replacement parts list 1. Rtl (retention time limited) note: the “rtl” marking indicates that its retention time is limited. When production is discontinued, this item will continue to be available only for a specific period of time. This period of time depe...
102 kx-tg4753b/kx-tg470b/kx-tga405b 16.6.1.3. Operational p.C. Board parts r164 d0gb272ja057 2.7k r165 erj3geyj273 27k s r167 d0gg270ja007 27 r171 d0ga220ja021 22 r172 d0ga104ja021 100k r175 d0ga561ja021 560 r176 d0ga101ja021 100 r177 d0ga102ja021 1k r178 d0ga102ja021 1k r321 erj2rkf1400 140 r322 er...
103 kx-tg4753b/kx-tg470b/kx-tga405b 16.6.2. Handset 16.6.2.1. Cabinet and electrical parts 16.6.2.2. Main p.C. Board parts note: (*1) reconfirm the model no. Written on the handset's name plate when replacing pcb100. Because the model no. Of the optional handset may differ from the included handset....
104 kx-tg4753b/kx-tg470b/kx-tga405b 16.6.2.3. Led board parts 16.6.3. Charger unit 16.6.3.1. Cabinet and electrical parts 16.6.3.2. Main p.C. Board parts 16.6.4. Range extender 16.6.4.1. Cabinet and electrical parts 16.6.4.2. Main p.C. Board parts note: (*1) when replacing ic611 or x501, make the ad...
105 kx-tg4753b/kx-tg470b/kx-tga405b 16.6.5. Accessories and packing materials note: (*1) you can download and refer to the operating instructions (instruction book) on tsn server. 16.6.5.1. Kx-tg4753b 16.6.5.2. Kx-tga470b 16.6.6. Screws 16.6.7. Fixtures and tools note: (*1) see equipment required (p...
106 kx-tg4753b/kx-tg470b/kx-tga405b t.I/n kxtg4753b kxtga470b kxtga405b safety ref. No. Part no. Part name & description remarks pqzz1cd300e jig cable (*1) pnzztg4741m batch file cd-rom (*1) pqzz430pir tip of soldering iron (*2) pqzz430prb rubber of soldering iron (*2).
© panasonic system networks co., ltd. 2013 unauthorized copying and distribution is a violation of law. Order no. Km41309645se f13 telephone equipment model no. Kx-tg4753b kx-tga470b kx-tga405b digital cordless answering system b: black version (for u.S.A.) table of contents page 1 replacement parts...
2 kx-tg4753b/kx-tga470b/kx-tga405b 1 replacement parts list 1.1. Reference chart 1.2. Original and new parts comparison lists nm kxtg4753b kxtga470b kxtga405b reason for change *the following items (1-8) indicate the reason for change. See the “notes” column for each part in original and new parts c...
© panasonic system networks co., ltd. 2013 unauthorized copying and distribution is a violation of law. Order no. Km41311801se f13 telephone equipment model no. Kx-tg4753b kx-tga470b kx-tga405b digital cordless answering system b: black version (for u.S.A.) table of contents page 1 replacement parts...
2 kx-tg4753b/kx-tga470b/kx-tga405b 1 replacement parts list 1.1. Reference chart 1.2. Original and new parts comparison lists nm kxtg4753b kxtga470b kxtga405b reason for change *the following items (1-8) indicate the reason for change. See the “notes” column for each part in original and new parts c...
© panasonic system networks co., ltd. 2014 unauthorized copying and distribution is a violation of law. Order no. Km41401272se f13 telephone equipment model no. Kx-tg4753b kx-tga470b kx-tga405b digital cordless answering system b: black version (for u.S.A.) table of contents page 1 replacement parts...
2 kx-tg4753b/kx-tga470b/kx-tga405b 1 replacement parts list 1.1. Reference chart 1.2. Original and new parts comparison lists km kxtg4753b kxtga470b kxtga405b reason for change *the following items (1-8) indicate the reason for change. See the “notes” column for each part in original and new parts c...