Pqqw15460za dm1206pw0 setting up for further information, visit http://www.Panasonic.Com/help base unit charge 7 hours handset use only the included panasonic ac adaptor pqlv203. (120 v ac, 60 hz) noise filter (for dsl service users) b a c d confirm “charging” is displayed. 5 [1] 10:30am aug.15 char...
– 2 – operating tips { } : shows button names. Using the navigator key press {^}, {v}, {} to navigate through menus and to select items shown on the display. Adjusting audio volume press {^} or {v} repeatedly while talking. Handset soft keys the handset features 2 soft keys. By pressing a soft key, ...
– 3 – basic operation (handset) feature operation adjusting the receiver/ speaker volume press {^} or {v} repeatedly while talking. Making a call using the redial list { redial} i {v}/{^}: select the desired phone number. I {c} viewing the caller list and calling back { view cid} i press {v} or {^} ...
– 4 – answering system (base unit) feature operation auto answer on/off { answer on} recording your greeting message (max. 2 minutes) 1 { greeting rec} 2 within 10 seconds, press {greeting rec} again. 3 speak clearly about 20 cm (8 inches) away from the mic. 4 to stop recording, press {stop}. Listen...
– 5 – frequently asked questions question cause/solution how can i increase handset volume level? L press navigator key {^} repeatedly while talking. Why is the conversation noisy or cutting off? L try to relocate the base unit so that distance from location to use the handset will be minimized. L s...
– 6 – quick troubleshooting for further troubleshooting information, visit http://www.Panasonic.Com/help or refer to operating instructions. Check if another person is using the telephone. Yes wait until they are finished. No re-registration failed. “system is busy. Please try again later.” 1 handse...
– 7 – quick troubleshooting place the handset on the base unit, then check if “charging” is displayed. “charging” is not displayed. “charging” is displayed. Unplug and then plug ac adaptor properly to both the base unit and ac outlet. Unplug the ac adaptor of the base unit and remove the battery fro...
– 8 – quick troubleshooting lift up the handset from the base unit or charger. Press {c} (talk) at the handset, then check if the display shows “talk”. Press {s} (sp-phone), then check if the dial tone is heard from the speaker on the back. No dial tone dial tone is heard. {c} {s} “no link to base. ...
– 9 – registering a handset to base unit the included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset. For further registration information, visit http://www.Panasonic.Com/registeryourhandset handset press {menu}, then ...
1 read this quick guide or operating instructions l if you lost operating instructions, you can download at http://www.Panasonic.Com/help 2 visit our website: http://www.Panasonic.Com/help l faqs and troubleshooting hints are available. 3 contact us via the web at: http://www.Panasonic.Com/contactin...
