Panasonic S-100PF1E5A Operating Instructions Manual - Adjusting Air
6
Adjusting Air
fl
ow Direction
Using the wireless remote controller
Using the timer remote controller
Press
/
to select your desired air
fl
ow direction.
Flap swing motion
Display when swing operation
is stopped
Pressing the button during
swing operation can stop the
fl
ap at the desired position.
Flap
fi
xed
(5 levels)
Recommended vertical air
fl
ow direction
Set the
fl
ap to the downward position for heating operation.
(With the upward setting, warm air cannot reach the
fl
oor.)
Set the
fl
ap to the upward position for cooling operation.
(With the downward setting, condensation may drip on to the
fl
oor.)
U1, T2 type
HEAT
COOL / DRY
FAN
Air
fl
ow direction
display
Air
fl
ow direction display
“FLAP” button
“FLAP” button
Fan and
heating
Cooling and
drying
(5 levels)
(3 levels)
Recommended
Recommended
Fixed to this
position
Adjusting the horizontal air
fl
ow direction
(Manual: T2 type only)
Move the horizontal air
fl
ow vanes
by hand for adjustment.
This section is described in the instruction manual supplied with the timer remote contoller (CZ-RTC2).
Regarding the High-spec Wired Remote Controller (CZ-RTC3), refer to the Operating Instructions supplied with the model CZ-RTC3.
Adjusting the upward and downward motion of air
fl
ow direction (U1 and T2 types only)
OI̲00̲F569616̲EU.indb 6
OI̲00̲F569616̲EU.indb 6
2014/02/28 9:31:02
2014/02/28 9:31:02
AMP Air Conditioning
www.ampair.co.uk | sales@ampair.co.uk