PLC Electronic Solutions Cini Remote 900MHz Operation Manual - 1. Introduction
Cini Remote 900MHz Operation Manual
12/6/2011
PLC Electronic Solutions Ltd.
Copyright © 2011
www.plcelectronicsolutions.com
3 of 9
1. Introduction
This document describes the Cini Remote transmitter and receiver features and
hardware functions of the Cini Remote Link. This product is to be used with the Cine
Tape Measure System a registered product of Cinematography Electronics Inc.
The 2
modules are described below;
a) Cini Remote Transmitter
This unit receives distance data from the opto-isolated serial port and
sends it over a 9600 baud, 900 Mhz radio link to the receiver module.
Using the channel display and the up/down pushbuttons you can select
one of 7 radio channels for the link. There is a microprocessor on the
transmitter module to configure and monitor the 900 Mhz radio
transceiver.
b) Cini Remote Receiver
This unit receives data from the 900 Mhz radio link of the Cini Remote
Transmitter and displays it on the 4 seven-segment readouts. The format
for the data (feet or meters) that will be displayed is set by the Cine Tape
Measure System. There is a microprocessor on the receiver module to
configure and monitor the 900 Mhz radio transceiver as well as receiving,
calculating and displaying the distance data.