Pline JOBUS CHARNOCK Owner's Manual

Summary of JOBUS CHARNOCK

  • Page 1

    Www.Pline.In v1.0 owner’s manual: diesel shunter locomotive “jobus charnock” gauge iii radio controlled model with synchronized diesel engine sound & horn for 63.5mm gauge tracks..

  • Page 2

    Www.Pline.In v1.0 please read this owners manual ca refully bef ore operating the model caution!! This model is an accurate replica of the original locomotive. It has sharp and moving parts. The locomotive drive gears are brass & stainless steel with sharp edges. At any time, operators must not come...

  • Page 3

    Www.Pline.In v1.0 sport shops. Light oil such as labelle #108 or hoppe’s gun oil would be good enough for lubricating most of the moving parts. For gears use a suitable gear grease such as permatex super lube or another hobby gear lubricant. The brass bevel gears driving each axle can be lubricated ...

  • Page 4

    Www.Pline.In v1.0 operating the model: insert 4 off aa alkaline or similar batteries into the transmitter, and connect a suitable 12v battery pack to the battery terminals of the locomotive (refer section for details). Cab controls (above) tx controls (above).

  • Page 5

    Www.Pline.In v1.0 next switch the transmitter ‘on’. The model can now be powered ‘on’ by flipping the main power 3- way switch in the cab downwards. Always switch ‘on’ the tx first before powering on the model. By moving the left hand joystick gradually upwards on the transmitter the locomotive will...

  • Page 6

    Www.Pline.In v1.0 important! Some parts may have loosened during shipment. Inspect your model prior to any operation. Please contact pline at info@pline.In for more assistance. Thank you! Marketed by: paul industrial company 30a, kasundia road, howrah-711101, india. Tel:+91-33-26407137 fax: +91-33-2...