PLRElectronics Barudan BEMS User Manual - Select A Design In Memory
of
8
Loading from the Tape Reader or USB Reader.
1. Choose the
READ menu option.
2. Press the
DEVICE key until TAPE appears.
3. Make sure it says
U-TAPE by pressing the CODE if you have to.
4. Select an empty memory location by pressing the
# and SET keys, if you have not already done
so.
5. If you are overwriting an existing design, press
NEW/ADD until it says NEW
6. Press
START when ready. If you are overwriting, you will get a confirmation screen; choose YES
You don’t have a Tape Reader? Purchase a
new
USB Reader
for your Barudan BEMS machine! Look at
the front page of PLR Electronics!
Select a design in memory
1. Make sure you are not in
DRIVE mode. If you are, then choose ABORT from the menu.
2. Press the
# key.
3. Type in the desired design number.
4. Press the
SET key.