PLRElectronics Barudan BEMS User Manual - Setting Color Change
of
8
Setting color change
1. Select a design first by pressing
#, number, and SET, if you have not already done so.
2. Now enter
DRIVE mode, first, by pressing DRIVE. You do not have to set the ORIGIN when it asks,
say
NO.
3. Choose the
TEACH’G function. Notice it will flash on and off.
4. Press
SET.
5. You will be at the first color change. Choose a number, and press
SET when ready.
6. Repeat while there are more colors.
7. It will say
COLOR MARK NOT FOUND at the end.
Erasing design in memory
1. Select the design to be deleted by pressing
#, number, and SET.
2. Choose the
DELETE function from the main menu. Be sure to press the G key if you do not see it
on the menu screen.
3. A confirmation screen will appear. Select
YES to delete the design.