1. DL manuals
  2. Plus
  3. Whiteboard
  4. M-125
  5. User Manual

Plus M-125 User Manual

Other manuals for M-125: User Manual
Manual is about: Copyboard

Summary of M-125

  • Page 1

    Copyboard m-12s/m-12w/m-125 user’s manual thank you for your purchase of the plus copyboard. Please read this user’s manual carefully before use to take full advan- tage of the functions of this product. After you have finished reading the manual, please keep it for future reference. Http://www.Mono...

  • Page 2

    The descriptions in this manual are for the m-12s, m-12w and m-125. There are three types of copyboards: the 2-page standard size type (model m-12s), the 2-page wide size type (m-12w) and the 4-page + screen type (m-125). In addition, depending on the product you have purchased, the printer and stan...

  • Page 3: Table of Contents

    Table of contents important safety information .........................................................................................................E-4 package contents ...........................................................................................................................E-7 ...

  • Page 4: Important Safety Information

    Safety precautions heeding the safety precautions below will lengthen the product’s service life and prevent fires, electric shocks and injury. Read these safety precautions carefully and be sure to heed them. Handling the ac power adapter • do not connect any ac adapter other than the dedi- cated o...

  • Page 5

    Important safety information handling the ac power adapter’s cord and plug • damaging the power cord could lead to fire or electric shock. • when installing, do not squeeze the power cord between the product and a wall, rack, etc. • do not modify or damage the power cord. • do not place heavy object...

  • Page 6

    Important safety information cleaning do not draw on the screen (model m-125) • when the sheet has become soiled, wiping it with a moist the screen is designed exclusively for use with optical cloth that has been wrung well, then before the sheet devices. If you draw on the screen, the ink cannot be...

  • Page 7: Package Contents

    Package contents the package contents are as described below. Please check before use. Copyboard, main unit [1] see “assembly and setup manual” for information about the assembly parts of the copyboard. Printer* [1] please see the instruction manual of the printer for informa- tion about the printer...

  • Page 8: Main Functions

    Main functions text or images drawn on the copyboard’s sheet surface can be printed in color or black and white on regular paper. A press of the “print” button on the operation panel quickly prints what has been hand written on the sheet surface to regular letter or a4 size paper. By mitigating the ...

  • Page 9: Names of The Parts

    Names of the parts front main unit pen tray * this illustration does not show the printer or connec- tion cords. * approx. 10 mm approx. 10 mm approx. 10 mm effective reading size approx. 10 mm frame cover sheet dedicated markers are used on the sheet to draw diagrams and to write. Control panel (se...

  • Page 10

    Names of the parts rear dc input connector connect this with the dc plug end of the ac power adapter. (see page e-37.) (only connect the supplied ac power adapter; nothing else.) personal computer (pc) dedicated usb port (type b) connect this with the usb port (type a) of the pc. (see page e-37.) sp...

  • Page 11

    Names of the parts changing the height of the unit this is the height adjustment when setting up the copyboard on the optional stand. The stand height can be adjusted to 3 levels by 100 mm. Caution • please have 2 or more persons lift the copyboard when installing it or making a height adjustment. I...

  • Page 12

    Names of the parts control panel (models m-12s and m-12w) when pressing a button, please press the center area (i.E., the round and protruding portion). The button may not work if it is pressed on a corner. 1 on/standby button turns the copyboard’s power on and off (standby mode). The function setti...

  • Page 13

    Names of the parts control panel (model m-125) when pressing a button, please press the center area (i.E., the round and protruding portion). The button may not work if it is pressed on a corner. 1 on/standby button turns the copyboard’s power on and off (standby mode). The function settings can be ...

  • Page 14: Operation Steps

    Operation steps the copyboard uses a ccd image sensor to read the diagrams and text that have been written down with spe- cial (4-color) markers, and accumulates the image data in internal memory. Pressing the print button prints out the sheet surface image data from the printer, and pressing the sa...

  • Page 15: Connecting The Power

    Ac adaptor box wall outlet copyboard's ac power adapter printer's ac power adapter note connecting the power about the connection and the ac adapter box the ac power adapters of the copyboard and printer are stored in the ac adapter box. In this manual, "ac power plug" refers to the ac power plug of...

  • Page 16: Setting The Time

    Setting the time set the copyboard's clock properly. The date and time are printed in the header/footer when printing and recorded in the file data when saving the file. Overview of the operation 1 switch to the function settings. With the power turned on, press and hold in the density button, then ...

  • Page 17

    Setting the time press the + button or the − button, select 20 (the first 2 digits of the year), and press the print button to finalize. There will be a change to the “last 2 digits of the year” setting mode ( display). Note • the factory default setting is 20. Pressing the print button in this cond...

  • Page 18: Printing

    Printing use a printer to print out the image that has been drawn on the sheet surface. Operations and names of parts differ from printer to printer. For details of operations, see your printer’s operat- ing instructions. Preparing the printer please check that the copyboard and the printer have bee...

  • Page 19

    Printing this function prints the sheet screen of the copyboard on the printer connected to the copyboard. M-12s/m-12w m-125 note • text (titles, the company name, the date, etc.) or images can be inserted in the margins at the top and bottom of the pages and the same information printed on all page...

  • Page 20

    Printing m-12s/m-12w m-125 step 2 (continued) notice • if the display content of the page indicator does not agree with that of the actual page, move the copyboard to either page 1 or the s page. (model m-125) • for model m-125, do not move the sheet surface by hand. Doing so could damage the copybo...

  • Page 21

    Printing when the copyboard is not going to be used, press the on/standby button and switch off the power (standby mode). • switch off the printer power. • when the erase reminder function is set to "enable" when the on/standby button is pressed, the display window and all the indicators flash simul...

  • Page 22

    Printing m-12s/m-12w m-125 continued from previous page stopping the printing after the print button was pressed and the reading completed stopping the process when multiple copies are being made when making addi- tional copies (when the reprint button has been pressed) press the copyboard’s on/stan...

  • Page 23

    Printing printing in the same ratio as the sheet surface (model m-12w) the m-12w has a wide screen, so when printing, the image is reduced in the horizontal direction and printed over the entire sur- face of the a4 sheet (so for example circles become ovals). If you wish to print with the same verti...

  • Page 24: Using Usb Memory

    Using usb memory the content of what has been drawn on the sheet surface of the copyboard can be saved in usb memory. Later, the saved image can be read into a personal computer and made into a document of the proceedings of the meeting, or affixed to a document. • what is needed to use the usb memo...

  • Page 25

    E-25 notice • the one screen portion that is viewable will be saved in usb memory. • saving of the portion located around the sheet surface might not be possible. Please see “effective reading size” on page e-9. Continued on next page press the color button and select color or black & white. Press t...

  • Page 26

    E-26 when the copyboard is not going to be used, press the on/standby button and switch off the power (standby mode). • when the erase reminder function is set to "enable" when the on/standby button is pressed, the display window and all the indicators flash simultaneously, the sheet automatically m...

  • Page 27

    E-27 drag to my documents saving image files on a computer/deleting image files examples of operations follow for saving the image files in the usb memory device to the hard disk of the personal computer, and for deleting the folder when the usb memory capacity is full. (there are various methods th...

  • Page 28

    E-28 deleting usb memory image files with the computer before deleting important image files, be sure to save them on the computer (as a data backup). 1. Open “my computer” and then open the drive icon which shows usb memory. The folder named “cb_image” contains the memory storage data of the copy-b...

  • Page 29: Making The Function Settings

    E-29 for models m-12s and m-12w for model m-125 making the function settings the copyboard includes such advanced functions as the erase reminder function that can be set directly using the operation buttons on the copyboard. The advanced functions can also be set from the function settings in the "...

  • Page 30

    E-30 function number (display window) function name description of function selected mode density mode lamp color mode lamp time setting setting of the date and time for the time stamp see page 16 header/footer setting of the time stamp written when saving : by factory default header/footer data out...

  • Page 31: Accompanying Software

    E-31 accompanying software see the copyboard software operation manual and the help screens of the various software for information about the method of using the software contained on the accompanying cd-rom. Software contents and overview help function • the software's help file uses the online mic...

  • Page 32: Operating Environment

    E-32 operating environment accompanying software supported os: microsoft windows 2000 professional (service pack 4 or later)/ xp (homeedition / professional edition service pack 2 or later)/ vista (32 bit version) supported pc: ibm pc/at or completely compatible machines that operate the aforementio...

  • Page 33: Meaning of Error Messages

    E-33 meaning of error messages if any of the following flashing indications appear in the display window of the control panel, please check the matters described below. Error messages will flash for 5 seconds; however, error displays of “e4”, “e5” ,“e6”and “e8” will be lit steadily after the flashin...

  • Page 34: Troubleshooting

    E-34 please check the following matters before making a request for servicing. Usb memory is full • there is no available space. • please delete unnecessary data using a personal computer (see page e-27). An unsup- ported printer is connected • a printer that is not supported by the copyboard has be...

  • Page 35

    E-35 troubleshooting condition please check printer related a press of the print button does not result in printing. • check that the power cable of the printer and the printer cable are securely connected. • check that the printer power indicator is lit. • check that the error indicators of the cop...

  • Page 36: Specifications

    E-36 specifications board type (model name) standard (m-12s) wide (m-12w) 5-surface (m-125) form installation method self-standing (t-shaped legs), or wall mounting external dimensions (t-shaped legs*¹) w1470 × d700 × h1970*² mm w1970 × d700 × h1970*² mm w1470 x d700 x h1970* 2 mm main unit weight 3...

  • Page 37: Appendix

    E-37 the ac power adapters of accessories and printers that have been verifi ed to be operation many differ from the ones shown on the connections diagram (they may be of the built-in or mounted-on type). Note back surface to dc input connector to printer connector to usb connector printer usb cable...