PNI IP801W User Manual - page 15
14
EN
For more detailes about the app please see Xmeye user manual on
the CD.
Next press “+” button to add a new
camera in the device list.
Select option “Quick Configuration
(iOS) / WiFi Config (Android)”
M a k e s u r e t h e s m a r t p h o n e i s
connected to the same Wi-fi network as
the camera. Check the name of the Wi-fi
n e t w o r k ( 1 ) t o b e t h e s a m e a s y o u r
network (2) then insert network password.
If this is the first time using this
camera proceed as bellow:
x
s h o r t p r e s s R e s e t b u t t o n o n t h e
bottom of the camera and wait for the
confirmation message (wait to be
configured); if you don’t hear this
mesaje reset the camera (bellow
procedure) then start again.
x
read the 2 messages on the screen
and check the 2 boxes (3)
x
press “Done/Complete all the above
operations” button to continue the
setup (4)
NOTE: this camera does not have a
LED indicator for Wi-fi connection.
1
2
3
3
3
4
If you already tried setting the camera and it was unsuccessful
reset the camera:
ź
long press Reset button until you hear the confirmation message
(restore to factory settings)
ź
the reset procedure will take severall minutes, please wait for the
confirmation sound
ź
repeat the setup procedure