PNJcam SD19 MagiCam User Manual - page 16

Page of 36

Download

Bookmark us

-12-

aee.com

-13-

e.. Auto.standby:.Select.the.auto.standby.time.of.0,.2.minutes,.5.minutes.or.10.minutes..In.case.of.no.any.mission.and.

operation.after.selecting,.the.system.will.start.timing.and.SD19.will.turn.off.input.and.output.to.enter.the.standby.

mode.at.the.end.of.the.time.set..If.there.is.any.operation.in.timing,.the.system.will.re-time.If.the.video.recording.

or.shutter.is.operated.in.the.standby.process,.SD19.will.be.waked.up..The.default.standby.time.is.5.minutes.when.

selecting.to.restore.the.factory.default;

f.. TV.output.format:.NTSC.or.PAL;.the.video.format.outputted.to.TV.can.be.selected..If.the.selected.format.is.changed,.

please.unplug.the.AV.cable.and.then.reinsert.it.to.update.the.parameters;.

g.. Format:.After.confirming.that.all.files.recorded.are.not.needed.to.be.saved,.all.files.can.be.removed.by.formatting..

.... Note:If.there.is.no.card.inserted,.the.memory.of.the.machine.will.be.formatted;.after.inserting.card,.the.system.will.

format.the.card.inserted,.but.not.format.the.memory.of.the.machine;

h.. Factory.default:.The.operation.restores.the.parameter.settings.to.factory.default..After.restoring,.the.system.will.set.the.display.

mode.of.submenu.of.the.“Menu”.in.English.state..Press.“M”.key.to.enter.the.menu.selection,.press.“”.key.to.enter.the.

menu.“Setup”,.press.“-“.key.to.select.the.option.“Language”,.and.then.it.can.set.in.your.desired.language..The.system.will.set.

the.time.at.01/01/11.after.restoring.factory.default;

i..

Language:.“English”,.“Simplified.Chinese”.or.“Traditional.Chinese”.It.can.select.the.language.via.left.or.right.key;

j... Light.source.frequency:.Select.the.light.source.frequency.50Hz.or.60Hz,.depending.on.local.grid.frequency,.in.order.

to.avoid.the.screen.flickering.in.preview.mode.or.in.video.recording;

k... Date/Time:.Time.can.be.adjusted.and.changed..It.will.be.displayed.on.the.bottom.right.corner.of.the.video.file.or.

photo.file.when.recording.or.shooting;.

Note:.To.press.“M”.key.under.the.submenu.may.exit.from.it;.