PNJcam SD19 MagiCam User Manual - page 23
aee.com
-20-
-21-
.
Please.follow.the.steps.below.to.code.the.remote.control.before.use.to.realize.the.correspondence.of.remote.control.
and.SD19:
1.. Turn.off.SD19,.press.and.hold.“Record”.key,.turn.the.power.switch.to.“ON”,.and.then.release.”Record”.key..Press.both.
“Record”.and.“Stop”.key.on.the.remote.control.once.within.3s.to.finish.the.remote.control.code.pairing.process..SD19.will.
tick.twice.after.coding.the.remote.control.successfully..
Note:.
a.. Use. wireless. remote. control. to. control. SD19. can. check. whether. the. code. pairing. is. successful.. The. control. functions.
.
include:. Video. recording. starting/stopping,. photo. shooting,. waking. in. standby. mode,. and. laser. light. turning. on/off;.
.
SD19. will. tick. once. for. each. operation.. In. case. of. video. recording. stopping. or. laser. light. turning. off,. SD19. will. tick.
.
twice;
b.. Remote.control.range:.Remote.control.within.15.meters.in.any.angle.horizontally.without..barriers;
c.. To.press.“Record”,.“Shutter”.or.“Stop”.key.on.the.remote.control.in.standby.mode.can.wake.up.the.system;
8.. Standby.mode:
A.. Non-voice.control.standby:.
.... Push.the.VOX.switch.to.“OFF”.and.turn.the.power.switch.to.“ON”,.the.system.will.start.working.and.it.will.enter.
preview.state.after.finishing.initialization..In.case.of.no.any.mission.and.operation,.the.system.will.auto.enter.standby.
power-saving.mode.at.the.end.of.the.auto.standby.time.set..Press.“Record”.or.“Shutter”.key.at.this.time,.or.remote.
control.any.key.on.the.remote.control,.the.system.will.be.waked.up..