Point PAX S80 Manual - page 22
21
4.1 Key input
See the instructions for forming letters on page 8.
Press FUNC.
Go to menu selection KEY INPUT.
Choose KEY INPUT.
MERCHANT ID = Check that the last numbers on the ID are same as “KOHDISTIN /
KOHDISTUSTIETO” on the PATU keys. If the numbers do not match, the keys are not
the right ones to your terminal. Press Cancel. If the numbers match, press Enter.
KEK PART 1 = Type here the key part one (OSA 1). Press Enter.
KEK PART 2 = Type here the key part two (OSA 2). Press Enter.
KVV = Type here the KVV (AVAINTARKISTE). Press Enter.
GENX KEK = Type here the GENERATION NUMBER (AVAINSUKUPOLVI). Press Enter.
SUCCES KEYS = Keys are correctly input.
PARITY ERROR = You have typed the wrong key or made a typing error. Try again.
Notice! Merchant ID is the customer number of your bank. It is named differ-
ently by different banks.
Osuuspankki/Nordea = Käyttäjätunnus
Säästöpankit/Aktia/Local Osuuspankki/Handelsbanken = Linjatunnus
Sampo = Asiakastunnus
Ålandsbanken = Lähettäjätunnus
4.2 Clearing the keys
Notice! This is only done when there is problem with the keys. If you clear the
keys on the terminal they have to be cleared from the bank also.
Press FUNC.
Go to menu selection KEY INPUT.
Choose CLEAR ATK.
Choose YES.
4. PATU -KEYS