Point PAX S80 Manual - page 7
of
35
6
1. BEFORE USE
1.4 Connecting the terminal
•
Connect the power cord to the power pack.
•
Take off the cord shield from the bottom of the terminal
•
Attach all the needed peripherals at place
•
Place back the cord shield
•
When using GPRS, place the SIM card into the SIM slot
•
Place the terminal firmly to a table
•
Switch on the terminal using the power key
Broadband:
Attach the ethernet cable to: LAN.
Attach the power cord to: POWER.
GPRS:
Attach the power cord to: POWER.
Place the SIM card to the right slot: the one that is sideways. Make sure that the locking
mechanism is in the right position so that the SIM card stays in place.