Pointman NL200H User Manual Manual - page 7
©2017 T.I.TENG Co., Ltd. All rights reserved
POINTMAN LAMINATOR NL200 User Manual
12
13
-NL200H (Dual-sided printing, Card Input Hopper)
RJ11 Port
Used for connecting to a NUVIA card printer. (communication port)
OPTION
Front Cover Button
Opens the Front Cover.
Front Cover
Opens the cover to replace the Film and Cleaning Roller.
Front Cover Lock
The Front Cover can be locked to protect the Film and
other parts inside.
Power Switch
Turns the laminator on/off.
Fan Vent
Circulates air through the vent.
Card Ejector
Releases the laminated cards.
Card Stacker
Stacks the laminated cards. (max. 150 cards)
LCD Display
Displays the system status.
Menu Navigation Buttons
Used to navigate the menu.
OK Button
Used to confirm your choice on the menu.
Menu Button
Used to enter or exit the menu.
(press once: enter, press once on the menu: exit)
Name
Description
USB Port
Used to connect the laminator and other devices using the USB cable.
RS232C Port
Used to connect the laminator and other devices using the RS232C cable.
AC Power Port
Supplies power to the laminator using the AC power cable.
Air Vent
Circulates air to keep the temperature under control.
Knob
Rotate the knob to remove a jammed card.
RFID Antenna Cover
Used to keep the RFID antenna in place.
RFID Antenna
Read the RFID tag on the film.
Upper Film Cartridge
Used to load the films in the upper side. (max. 500 films can be loaded)
Cartridge Load/Eject Button
Used to remove or replace the cartridge.
Lower Film Cartridge
Used to load the films in the lower side. (max. 500 films can be loaded)
Card input hopper(Standard)
Stores cards to laminate(max. 100 cards)
Card Input hopper Lock
Used to lock the card Input hopper for Security
Name
Description
OPTION