1. DL manuals
  2. Protek RC
  3. Battery Charger
  4. Prodigy 610 DUO
  5. Instruction Manual

Protek RC Prodigy 610 DUO Instruction Manual

Manual is about: Professional balance charger

Summary of Prodigy 610 DUO

  • Page 1

    Manufactured by protek r/c multi-chemistry, high output dual charger system with dual 200watt outputs & integrated cell balancers all specifications and figures are subject to change without notice. Printed in china © 2010 © protek r/c 2010 version 1.0

  • Page 2

    01 02 lcd screen pc link socket usb power supply 5v/1a output 1 balancing port output 2 balancing port temperature sensor type/stop button select wheel (rotary control) inc/dec button enter/start button capacitive touch button system output 1 led output 2 led table of contents introduction ............

  • Page 3

    03 04 introduction special features please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on operating and safety. The unit is simple to use, but the operation of a sophisticated automatic charger/ discharger such as t...

  • Page 4

    05 06 adaptable to various type of lithium battery the prodigy 610 is adaptable to various types of lithium batteries, such as li-ion, lipo and the new life series of batteries. Fast and storage mode of lithium battery there are several modes of charging available, ‘fast’ charge will reduce the dura...

  • Page 5

    07 08 never leave the charger unattended when it is connected to its power supply. If any malfunction is found, terminate the process at once and refer to the operation manual. Warning and safety notes warning and safety notes these warnings and safety notes are particularly important. Please follow...

  • Page 6

    09 10 warning and safety notes program flow chart attention should be paid to the connection of lithium battery especially. Do not attempt to disassemble a battery pack! Please be aware that lithium battery packs can be wired in parallel and in series. In the parallel connection, the battery’s capac...

  • Page 7

    11 12 4mm bullet connectors plugging to power supply directly using terminal clip attaching to car battery lithium polymer balance charge program connection diagram connecting the charger the prodigy 610 comes with male 4mm bullet connectors attached to the power input cables. These cables are appro...

  • Page 8

    13 14 initial parameter setup (users set up) initial parameter setup (users set up) initial parameter set up (users set up) the prodigy 610 duo will be operated with the default value of the essential user settings when it is connected to a 12v battery for the first time. The screen displays the fol...

  • Page 9

    15 16 lithium battery (lilo/lipo/life) program charging lithium battery in the charge mode lithium battery (liio/lipo/life) program these programs are only suitable for charging and discharging lithium batteries with a nominal voltage of 3.3v, 3.6v and 3.7v per cell. These batteries need to adopt di...

  • Page 10

    17 18 charging lithium battery in the balance mode charging lithium battery in the fast charge mode charging lithium battery in the balance mode this function is for balancing the voltage of lithium-polymer battery cells while charging. In the balance mode, the battery needs to have a balance lead t...

  • Page 11

    Voltage balancing and monitoring in the discharge process the processor monitors voltage of each cell when the battery packs are during its “storage” and “discharging” process. If voltage of any cell is abnormal, the prodigy 610 will show error message and terminate the program forcibly. So if there...

  • Page 12

    Set discharge current on the left and the final voltage on the right. Range of the discharge current is 0.1-5.0a; range of final voltage is 0.1-25.0v. Press start/enter key for more than 3 seconds to start the program. The screen indicates the discharging state. You can press start/enter key to alte...

  • Page 13

    . 23 24 storage data program storage data program for your convenience, the prodigy 610 duo has a data storage and load program. It can store ten batteries data representing the respective specifications of batteries. You can call back the data when charging or discharging without setting up the pro...

  • Page 14

    Ptk-5214 jst charge lead ptk-pro-40a-sp super pro 40 power supply temperature sensor ptk-bal-eh-6s multi-adapter balance board ptk-bal-xh-6s multi-adapter balance board ptk-bal-hp-6s multi-adapter balance board ptk-5220 multi-connector charge lead ptk-5224 traxxas charge lead ptk-5231 ec3 style char...

  • Page 15

    27 28 conformity declaration prodigy 610 satisfies all relevant and mandatory ec directives and fcc part 15 subpart b: 2008. For ec directives: the product has been tested to meet the following technical standards: this symbol means that you must dispose of electrical from the general household wast...

  • Page 16

    29 30 liability exclusion this charger is designed and approved exclusively for use with the types of battery stated in these instruction manual. Protek r/c accepts no liability of any kind if the charger is used for any purpose other than that stated. We are unable to ensure that you follow the ins...