Protek RC Prodigy 610 DUO Instruction Manual - page 4
05
06
Adaptable to various type of lithium battery
The Prodigy 610 is adaptable to various types of lithium batteries, such as Li-ion,
LiPo and the new LiFe series of batteries.
Fast and storage mode of lithium battery
There are several modes of charging available, ‘Fast’ charge will reduce the duration of
charging, while ‘store’ state can be used when you are not planning to use the batteries
for several days. This will protect and exend the useful life of your batteies.
Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on the
principle of the Delta-peak voltage detection. When the battery's voltage exceeds
the threshold, the process will be terminated automatically.
Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or
NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the
'AUTO' charging mode.
Capacity limit
The charging capacity is always calculated as the charging current multiplied by
time. If the charging capacity exceeds the limit, the process will be terminated
automatically when you set the maximum value.
Temperature threshold
The battery’s internal chemical reaction will cause the temperature of the battery
to rise. If the temperature limit is reached, the process will be terminated. This
function is available by connecting temperature probe, which is included in the
package.
Processing time limit:
This will limit the maximum process time allowed to charge or discharge.
Data store/load
For users convenience it can store preset information on a maximum of 10 different
settings. You can establish the program settings of the battery to charge or
discharge. These, settings can be quickly recalled at any time.
Cyclic charging/discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is
operable for battery refreshing and balancing to stimulate the battery’s activity.
SPECIAL FEATURES
SPECIAL FEATURES
PC based analysis using USB Communication (For output 1 only.)
The Prodigy 610 Duo is fitted with a mini USB port on the front side of the case;
a USB wire can be connected to this socket in order to link the charger to a PC.
“Charger Monitor” program enables you to view graphs of charge and discharge curves,
with a capacity, voltage, temperature and ampere display, and individual curves can be
individually suppressed or superimposed to allow a visual comparison of the data.
PC based analysis using USB Communication
USB Power Supply
The USB power supply can provide 5V, 1A continue current. You can power your
mobile phone, digital camera or even your IPod via the USB power supply.